Fieldpiece Discontinued

HS26 The Original Stick Digital Multimeter by Fieldpiece

The HS26 is the "Original" Stick Meter and is packed with the portability, toughness and modular expandability HVACR professionals expect. This slim-shaped digital multimeter fits easily in your pocket or on your belt in the included case. Features most of the electrical parameters you use everyday including microamps DC for flame rectifier diode tests and capacitance for motor-run and motor-start capacitors. It's a manual ranging meter and features a rugged ABS plastic housing with an O-ring to block contaminants, MAX hold, hi-voltage and continuity LEDs and beepers, and auto power-off (APO) to conserve battery life.

The HS26 is smaller, simpler and more rugged than its bigger brothers, and still works with all Fieldpiece accessory heads. All Fieldpiece accessory heads slide on the top, enabling the user to test a wide variety of parameters. All this plus the removable tip test leads make safe one-handed testing a snap.

• Modular Expandability
• 400 AAC with included clamp
• Microamps DC for flame rectifier diode testing
• Capacitance
• High Voltage and Continuity Indicators
• MAX and Data HOLD
• Silicone Leads with Detachable Probe Tips
• Rugged ABS case with O-ring to block contaminants
• Auto power-off (APO) to conserve battery life
• Manual ranging for safer testing
• Connects directly to any accessory head
• High voltage alert
• Safe one handed testing

Includes

• The Original Stick Digital Multimeter - HS26
• 400A Amp Clamp Accessory - ACH4
• Deluxe Silicone Test Leads - ADLS2
• Short Alligator Lead Extensions - ASA2
• Full-Size Meter Case - ANC7
• 9-Volt Battery (installed)
• Operator's Manual

LT16A True RMS Digital Multimeter by Fieldpiece

The LT16A is a classic style multimeter with True RMS and phase rotation. This manual ranger covers the electrical parameters you need for HVACR and, with detachable test leads, works with our accessory heads to test non-electrical parameters too. The LT16A meter measures current, resistance, voltage, capacitance, frequency, continuity and more. Test leads store in the meter body along with the tilt stand and magnetic hanger. The body is constructed of durable ABS plastic and a blue backlight makes the large LCD even more visible.

The LT16A is a True RMS manual ranging DMM that comes with an amp clamp and includes phase rotation for testing three-phase motors. Use the MIN/MAX function to record highs and lows. The continuity beeper tells you if a circuit is open or closed. Operation of the LT16A is easy. Simply select a range and test to hunt down those electrical culprits.

The electrical parameters on this meter are among the most comprehensive in the industry. Add the capability of testing all the other parameters you need for HVACR field service through accessory heads, and this meter goes from contender to a hands-down favorite. Literally. Use the included deluxe silicone lead set to hook up the V and COM leads, hang or tilt the meter out of the way, and use the included third yellow lead to perform a "no-hands" test on a three-phase motor.

• Works with Fieldpiece Accessory Heads
• Continuity Indicator
• 400AAC
• Capacitance (MFD)
• Microamps DC – Flame Rectification Tests
• Phase Rotation
• Frequency
• Measure from 10Hz to 40kHz using this range with 1 Hz resolution
• True RMS
• Silicone Leads with Detachable Probe TipsLTCaseStand
• Tilt Stand and Magnetic Hanger
• Bright Blue Backlight
• MAX/MIN hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case with rubber boot
• Fits naturally in your hand despite classic design
• Auto power-off (APO) to conserve battery life

Includes

• Classic Style Digital Multimeter with Phase Rotation - LT16A
• Deluxe Silicone Test Leads - ADLS2
• One (1) Yellow Phase Rotation Test Lead - AYL1
• Short Alligator Lead Extensions - ASA2
• 400A Amp Clamp Accessory - ACH4
• Mail Pouch-Style Instrument Case - ANC5
• 9-Volt Battery (installed)
• Operator's Manual

LT17AW Wireless Digital Multimeter by Fieldpiece

The LT17AW Digital Multimeter is loaded with the parameters and ranges HVACR professionals need for HVACR troubleshooting, plus it receives measurements wirelessly from any of the Fieldpiece Accessory Heads when connected to the wireless transmitter that's included. You can now easily measure current, resistance, voltage, capacitance, frequency, continuity, and temperature either directly, or wirelessly from up to 75' away.

Because of the wireless capability you can connect your amp clamp and completely close the blower door so you get a more accurate amperage reading. Or you can set up a wet bulb measurement in the attic and get live readings while you're making adjustments at the condenser.

Designed specifically for HVACR field service, the LT17AW combines wireless readings with specific features and benefits that HVACR field service pros need:

Transforms any Fieldpiece Accessory Head into a Wireless Device

There is a Fieldpiece accessory head available for just about any job. There are heads to measure temperature, superheat, subcooling, RH%, wet bulb, dew point, vacuum (microns of mercury), manometer (inches of water column), amps AC&DC, high voltage, CO, %CO2, air velocity, and many more.

Transmitter and ACH4 Clamp

Now with the wireless LT17AW all accessory heads can be used either directly through tests leads, or wirelessly with the ET2W wireless transmitter that's included with your LT17AW.

Continuity Indicator

If you were doing lab testing, these features would probably drive you crazy. We've heard from more than one HVACR veteran that these features really remind you of what you're doing and they've avoided potentially dangerous situations in the field. The Hi-V LED and beeper let you know when you've hooked up to a circuit over 30V. The continuity LED and beeper tells you if a circuit is open or closed.

400AAC

Using the detachable test leads and the accessory head amp clamp, read 0-400 amps directly on your meter.

Capacitance (MFD)

Measure microfarads on motor-run and motor-start capacitors using this range. Disconnect the capacitor from power first. Short the terminals to discharge the capacitor. Disconnect any resistors that might be between the terminals of the capacitor and measure to check for degradation.

Temperature

Take ambient air or refrigeration line temperatures and more with the built-in K-type port and the included ATB1 wrap tab thermocouple. Add a wet sock (saturated tissue or a shoelace to take wet bulb temperatures. The built-in temperature junction offers great temperature compensation for more accurate and faster measurements,

And more:

• Microamps DC - Flame Rectification Tests
• Silicone Leads with Detachable Probe Tips
• Tilt Stand and Magnetic Hanger
• Bright Blue Backlight
• MAX/MIN hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case with rubber boot
• Auto power-off (APO) to conserve battery life

Includes

• Digital Multimeter - LT17AW
• Wireless Transmitter - ET2W
• Current Clam Head - ACH4
• Deluxe Test Leads - ADLS2
• K-type Thermocouple - ATB1
• Large Single Meter Case - ANC5
• Operator's Manual

LT83A Classic Style Digital Multimeter by Fieldpiece

The LT83A is a basic classic style multimeter at a great price. It's a manual ranging meter that includes common HVACR electrical parameters. Add our optional detachable test lead set, and the LT83A works with our accessory heads to test non-electrical parameters too. The LT83A meter measures voltage, resistance, amps, continuity and more. Test leads store in the meter body along with the tilt stand and magnetic hanger. The body is constructed of durable ABS plastic and a blue backlight makes the large LCD even more visible. It's a good, solid meter and a real value.

• Works with Fieldpiece Accessory Heads
• Continuity Indicator
• 400AAC
• Microamps DC - Flame Rectification Tests
• Optional - Silicone Leads with Detachable Probe Tips
• Tilt Stand and Magnetic Hanger
• Bright Blue Backlight
• MAX/MIN hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case with rubber boot
• Auto power-off
• Dedicated battery check

Includes

• Classic Style Digital Multimeter for HVACR - LT83A
• 1 Test Lead Set
• 9-Volt Battery (installed)
• Operator's Manual

SC45 Mini Clamp Meter with Temperature by Fieldpiece

The Mini Clamp Meter with Temperature for HVACR professionals, model SC45, incorporates a lot of big meter functions into a compact, easy to use design. While it's not exactly an all-in-one multimeter, this manual and auto ranging DMM includes most of the ranges you use in HVACR everyday. Along with standard multimeter ranges, we designed the SC45 to include capacitance (MFD) and temperature with great compensation. And to add to that, we designed it with built-in non-contact voltage and a continuity beeper to give you a powerful HVACR meter that's under 8-inches tall. Makes a great backup or a solid performer for everyday testing.

Like all of our test instruments, the main benefit of the SC45 is that it was designed specifically for HVACR field service. It's rugged, has built-in safety features and includes most of the ranges you need for everyday testing. Some of the highlights include:

• Temperature
• Capacitance (MFD)
• 400AAC
• Non-contact Voltage
• Hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Continuity
• Rugged ABS case
• Ergonomic shape
• Auto power-off
• Compact size
• Works with any accessory head
• Autoranging

Includes

• Mini Clamp Meter with Temperature for HVAC/R - SC45
• Vinyl Test Leads
• One (1) Wrap-Tab K-type Thermocouple - ATB1
• Mini Clamp-On Meter Case - ANC4
• Two 1.5V "AAA" batteries (installed)
• Operator's manual

SC46 True RMS Mini Clamp Meter by Fieldpiece

The SC46 True RMS Mini Clamp Meter with Temperature and Backlight packs the biggest punch in the SC40 series. With features that rival many full-sized clamp meters, this auto ranging DMM packs a ton of functions into a compact, easy to handle shape. It includes temperature and capacitance as well as a bright green backlight and True RMS for more accurate readings on non-sinusoidal AC waveforms. It also packs in most of the other HVACR ranges you use everyday. Some technicians use the SC46 as their everyday DMM, others as a back-up or second meter to get more testing done in less time. This mini-clamp was deigned to make your job easier, safer, and faster no matter where you choose to rank it in your bag.

• True RMS
• Temperature
• Capacitance (MFD)
• 400AAC
• Non-contact Voltage
• Hold
• Backlight
• Volts AC
• Volts DC
• Resistance (Ohms)
• Continuity
• Rugged ABS case
• Ergonomic shape
• Auto power-off
• Works with any accessory head
• Autoranging

Includes

• True RMS Mini Clamp Meter with Temperature and Backlight - SC46
• Vinyl Test Leads
• One (1) Wrap-Tab K-type Thermocouple - ATB1
• Mini Clamp-On Meter Case - ANC4
• Two 1.5V "AAA" Batteries (installed)
• Operator's Manual

SC53 Dual Display Mini Clamp Meter by Fieldpiece

Read amps and volts at the same time with the Dual-Display Mini Clamp Meter with Temperature, model SC53. In addition to having a dedicated display for reading amps, you can measure any of the other ranges on the meter dial simultaneously. The SC53 is compact measuring only about 8-inches, easy to use and includes many of the ranges you use everyday during HVACR field service. Many instructors recommend the SC53 as a starter meter while seasoned veterans call it a little HVAC workhorse. Temperature and capacitance, built-in safety features like non-contact voltage and amp or dial hold, make this meter a solid choice for the work you do in the field.

• Dual Display
• Temperature up to 400 degrees F
• Capacitance (MFD)
• 400AAC
• Non-contact Voltage
• Hold
• Backlight
• Volts AC
• Volts DC
• Resistance (Ohms)
• Continuity
• Rugged ABS case
• Ergonomic shape
• Auto power-off
• Amps and volts simultaneously
• Works with Fieldpiece Accessory Heads

Includes

• Dual-Display Mini Clamp Meter with Temperature - SC53
• Vinyl Test Leads
• Mini Clamp-On Meter Case - ANC4
• Three 3V lithium-ion CR2032 Batteries (installed)
• Operator's Manual

SC54 Swivel Head Clamp Meter by Fieldpiece

The SC54 swivel-head clamp meter is packed with all the electrical measurements HVACR professionals use everyday. It's fast reacting, easy-to-use, and rugged. Extended temperature tolerances allow for testing in refrigerators and on rooftops, and the display is unaffected by temperatures from -4°F to 158°F.

The new 10000 count display is fast reacting and shows large values and small, without moving the decimal point or changing units. Plus the SC54 works with any Fieldpiece accessory head to further expand tech's testing capabilities without having to purchase multiple meters.

• Fast Testing
• Expanded temperature tolerances -- allows for testing in refrigerators and on rooftops
• Bright backlight.
• Capacitance -- to test questionable motor start and run capacitors
• Swivel Head -- for a clear view at any angle
• Frequency (Hz) through the clamp -- no more unnecessarily breaking the circuit
• Modular Expandability
• True RMS
• Packed with HVACR measurements
• Easy temperature calibration

Includes

• SC54 Clamp Meter
• ATB1 Thermocouple
• ADLS2 Silicone Leads
• ASA2 Gator Clip Leads
• ANC7 Padded Case

SC55 Dual Display Swivel-Head Clamp Meter by Fieldpiece

The SC55 Swivel-Head Clamp Meter is specifically designed for HVACR professionals and contains all the functions most relevant to the job. Packed with 13 different test parameters the SC55 clamp meter offers more features and functions than any other meter of its kind on the market. Plus the full 180º swivel head allows you to easily see the display at any angle.

Perfect for those hard to reach wires, the SC55 Swivel-Head Clamp Meter also boasts a rugged design to withstand harsh conditions, has the precision and reliability that Fieldpiece is known for, and is compatible with all Fieldpiece Accessory Heads via your test leads.

• 180° Swivel Head Clamp to easily view your results at any angle
• Dual Display to easily view multiple measurements at one time
• Rugged Construction to withstand harsh conditions
• Auto Power Off to preserve your battery life when clamp isn't in use
• Non-Contact Voltage warning via audio and visual alarms
• Easy Field Calibration with convenient pot location to quickly calibrate K-type thermocouples
• Auto or Manual Ranging button to conveniently toggle between ranges
• Hold Function to keep data as long as necessary
• Select Button to swiftly toggle through measurement options
• Frequency Measurement without test leads
• Constant Battery Status so you don't run out of batteries in the middle of a job

Includes

• SC55 - Swivel Head Clamp Meter
• ADLS2 - Deluxe Silicone Test Leads
• ASA2 - Alligator Clip Lead Extensions
• ATB1 - K-type Thermocouple
• ANC7 - Large Single Meter Case
• Velcro Strap

SC56 True RMS Swivel-head Clamp Meter by Fieldpiece

The Fieldpiece SC56 Swivel Head Clamp Meter is the best clamp meter on the market for the HVAC/R technician. The SC56 is packed with all the essential test parameters necessary to get the job done right. Plus, you can use all the Fieldpiece Accessory Heads via your test leads.

In addition, the incredible 180° swivel head clamp enables you to view your results at any angle. Combine that with the unique wire grabbing claw and the LED flashlight in the SC56 clamp head, and you can easily isolate wires that are hard to reach and/or difficult to see.

• 180° Swivel Head Clamp to easily view your results at any angle
• Inrush Current to easily diagnose an impending motor failure
• Clamp Flashlight to illuminate wires in dark spaces
• Backlight Dual Display to display multiple information simultaneously -- even Celsius and Fahrenheit
• Rugged Construction to withstand harsh conditions
• Automatic Power Off (APO) to preserve your battery life when clamp isn't in use
• Non-Contact Voltage warning via audio and visual alarms
• Easy Field Calibration with convenient pot location to quickly calibrate K-type thermocouples
• True RMS to accurately measure non-sinusoidal wave forms
• Auto or Manual Ranging button to conveniently toggle between ranges
• Constant Battery Status so you don't run out of batteries in the middle of a job
• Temperature resistant LCD

Includes

• SC56 - Swivel Head Clamp Meter
• ADLS2 - Deluxe Silicone Test Leads
• ASA2 - Alligator Clip Lead Extensions
• ATB1 - K-type Thermocouple
• ANC7 - Large Single Meter Case
• Velcro Strap

SC57 Wireless Swivel-head Clamp Meter by Fieldpiece

The SC57 is the top-of-the-line clamp meter from Fieldpiece Instruments. Packed with measurements HVACR pros need, the SC57 receives wireless HVACR measurements up to 75' away from the testing point.So, you can get HVACR readings, from anywhere on the jobsite, sent directly to the SC57 meter in your hand!

• Live temperature split readings while working on the condenser
• Accurate amps with the blower door firmly closed
• Real-time vacuum readings from anywhere on the job site
• Wireless Measurements for faster, more accurate readings
• 180° Swivel Head Clamp to easily view your results at any angle
• Clamp Flashlight to illuminate wires in dark spaces
• Bright Blue Backlight stays on for 3 minutes for easy readings
• Rugged Construction to withstand harsh conditions
• Automatic Power Off (APO) to preserve your battery life when clamp isn't in use
• Non-Contact Voltage warning via audio and visual alarms
• Easy Field Calibration with convenient pot location to quickly calibrate K-type thermocouples
• True RMS to accurately measure non-sinusoidal wave forms
• Auto Ranging for quick, accurate readings
• Constant Battery Status so you don't run out of batteries in the middle of a job

The SC57 is simply the best HVACR clamp meter on the market. It provides fast and accurate readings for all the measurements HVACR techs take everyday, plus it's wireless. It's the only clamp meter on the market that can take true wireless readings. And with that, techs can do a faster, more accurate job. There are countless ways wireless measurements can help HVACR techs do a better job, but there are two main issues solved by taking measurements wirelessly.

Less time & hassle -- A large part of a techs day is spent walking back and forth between measurement points, and adjustment points. With the SC57 wireless clamp meter, techs can wirelessly send measurement readings directly to the meter at the adjustment point. So things like indoor wet bulb can be read while techs are at the condenser making adjustments.

Better accuracy -- Wireless measurements give HVACR pros a real-time snapshot of the system, so measurements are taken under the exact same conditions. So temperatures and pressures don't have time to change between different readings. The real-time measurements allow techs to accurately install, service, and charge systems.

In addition to being able to expand testing capabilities wirelessly with any Fieldpiece accessory head, the SC57 has these measurements built right in:

Includes

• SC57 - Wireless Swivel Head Clamp Meter
• ET2W - Wireless Transmitter
• ADLS2 - Deluxe Silicone Test Leads
• ASA2 - Alligator Clip Lead Extensions
• ATB1 - K-type Thermocouple
• ANC7 - Large Single Meter Case
• Velcro Strap

SC66 Basic Manual Ranging Clamp Meter by Fieldpiece

The SC66 is the top Fieldpiece clamp meter among HVACR instructors. It's a manual ranging DMM that includes the electrical ranges students and technicians use for most HVACR work, plus temperature, capacitance and DC current - all for a low price. It also has several safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder on the clamp, and MAX hold so you can concentrate on the test point, hook up, and see the results after you've disconnected. Instructors and their students tell us they like the fact that it is a manual ranger so they have to think about what they're hooking up to before they do it. They also like that the SC66 is just the right amount of meter for residential techs just starting out.

• Non-contact Voltage
• High Voltage and Continuity Indicators
• 200AAC
• Capacitance (MFD)
• Temperature
• Microamps DC - Flame Rectification Tests
• Silicone Leads
• MAX Hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case
• Auto power-off
• Safe one-handed testing

Includes

• Manual Ranging Clamp Meter with Temperature - SC66
• Wrap Tab K-Type Thermocouple - ATB1
• Silicone Test Leads - ASLS2
• Large Single Meter Case - ANC7
• 9-Volt Battery (installed)
• Operator's Manual

SC67 Basic Manual Ranging Clamp Meter with Temperature by Fieldpiece

The SC67 is a great choice. It's a manual ranging clamp meter that includes most of the electrical ranges you use for HVACR testing, plus temperature up to 1000° F with a compatible k-type thermocouple. The SC67 clamp meter also has several safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder on the clamp, and MAX hold so you can concentrate on the test point, hook up, and see the results after you've disconnected. It also includes capacitance (MFD) for checking motor-start and motor-run capacitors and microamps DC for flame diode tests. Techs tell us It's a solid performer for everyday HVACR testing.

Designed specifically for HVAC/R field service, the SC67 is a dedicated DMM and offers specific features and benefits to HVAC/R field service pros including:

• Non-contact Voltage
• High Voltage and Continuity Indicators
• 200AAC
• Capacitance (MFD)
• Temperature
• Microamps DC - Flame Rectification Tests
• Silicone Leads
• MAX Hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case
• Auto power-off
• Safe one-handed testing

Includes

• Manual Ranging Clamp Meter with Temperature to 1000°F - SC67
• Wrap Tab K-Type Thermocouple - ATB1
• Silicone Test Leads - ASLS2
• Large Single Meter Case - ANC7
• 9-Volt Battery (installed)
• Operator's Manual

SC76 Temperature and Capacitance Clamp Meter by Fieldpiece

The SC76 has most parameters for electrical and thermal HVACR testing in one meter. It includes a host of safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads, and alligator probe tips for easy one-handed testing. As far as ranges go, the SC76 clamp meter has temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR. Many technicians tell us they enjoy the choice between manual and auto-ranging. It's a lower priced all-in-one clamp meter for technicians who don't need the backlight or True RMS functions. It's a rugged workhorse you can count on to get the job done easier, faster, and more safely.

Designed specifically for HVACR field service, the SC76 is a dedicated DMM and offers specific features and benefits to help HVACR professionals do more, everyday:

• Works with Fieldpiece Accessory Heads
• Non-contact Voltage
• High Voltage and Continuity Indicators
• 300AAC
• Capacitance (MFD)
• Temperature up to 1000 degrees F
• Microamps DC - Flame Rectification Tests
• Silicone Leads with Detachable Probe Tips
• Hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case
• Auto power-off
• Lead storage on back
• Safe one-handed testing

The SC76 is a rugged HVAC/R meter through and through. Like all of our instruments, we designed this meter exclusively fit the way you do your job.

Includes

• HVAC/R Clamp Meter with Temperature and Capacitance - SC76
• Wrap Tab K-Type Thermocouple - ATB1
• Silicone Test Leads - ASLS2
• Large Single Meter Case - ANC7
• 9-Volt Battery (installed)
• Operator's Manual>

SC77 True RMS Clamp Meter by Fieldpiece

The SC77 is one of our most popular digital multimeters for a reason. It has virtually every parameter for electrical and thermal HVACR testing in one meter. This auto ranger includes a host of safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads, and alligator probe tips for easy one-handed testing. As far as ranges go, it has temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR. Not to mention technicians tell us it is one of the most durable meters in the industry.

Designed specifically for HVACR field service, the SC77 is a dedicated DMM and offers specific features and benefits to HVACR field service pros including:

• Works with Fieldpiece Accessory Heads
• Non-contact Voltage
• High Voltage and Continuity Indicators
• 300AAC
• Capacitance (MFD)
• Temperature
• Microamps DC - Flame Rectification Tests
• True RMS
• Silicone Leads with Detachable Probe Tips
• Bright Blue Backlight
• Hold
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case
• Auto power-off
• Safe one-handed testing

Includes

• True RMS Clamp Meter with Temperature, Capacitance and Backlight - SC77
• Wrap Tab K-Type Thermocouple - ATB1
• Deluxe Silicone Test Leads - ADLS2
• Alligator Clip Lead Extensions - ASA2
• Large Single Meter Case - ANC7
• 9-Volt Battery
• Operator's Manual

AAT3 Hot-wire Anemometer & Psychrometer Accessory Head by Fieldpiece

The In-Duct Hot-Wire Anemometer & Psychrometer accessory head, AAT3 allows HVACR professionals to measure air velocity, temperature, and %RH all in one tool. The engineered 38" telescoping probe with laser etching and quick-response sensor provides quick and easy airflow measurements from the correct location--near the evaporator. When using with the Fieldpiece HVAC Guide System Analyzers, the AAT3 can automatically calculate target super heat and target evaporator exit temperature. Connected to a wireless transmitter, the AAT3 can send measures wireless to any Fieldpiece Wireless Meter (HG3, LT17AW, EH4W) up to 100' away.

Designed specifically for HVACR professionals, the AAT3 In-Duct Psychrometer is a great tool to properly install and service fixed restrictor systems. More than 70% of A/C units are running inefficiently, but with the AAT3 it's easier to ensure units are running at their maximum efficiency. HVACR pros can trust the results for tests like temperature splits, target evaporator exit temperature, target superheat, and CheckMe!® because measurements are taken near the evaporator without the interference of outside air temp or leaks in the duct work.

Functions

• Measures temperatures, %RH, and air velocity
• Calculates wet bulb and dew point
• Automatically calculates Target Superheat, Target Evap Exit Temperature, and Total CFM (when using the Fieldpiece HVAC Guide System Analyzers)

Features and Benefits

• Measures temperature and %RH
• Calculates wet bulb and dew point
• Slim 38" telescoping probe
• Fast response time
• Depth and direction indicators
• Hands-free testing with stabilizing cone and magnetic hanger
• Can send wireless measurements from up to 100' away

Includes

• In-Duct Hot-wire Anemometer/Psychrometer Accessory Head - AAT3
• Telescoping Precision Thermistor & Hot-Wire Probe
• Stabilizing Cone - RCONE

ARH4 Digital Psychrometer Accessory Head by Fieldpiece

The Fieldpiece ARH4 Digital Psychrometer Accessory Head measures both relative humidity and ambient air temperature. It calculates dew point and wet bulb. It's great for calculating target superheat as well as logging %RH, temp, WB or DP over time. The head converts %RH, ambient temperature, dew point temperature, and wet bulb temperature to a voltage at a rate of 1 %RH or degree to 1mVDC and your reading is displayed on your meter. The ARH4 snaps directly onto Fieldpiece stick meters, data logger, electronic handles and adapters.

The ARH4 employs an advanced pair of sensors, a thermistor and a hygrometer, that sense temperature and moisture in the air. With built-in psychometric charts, the ARH4 calculates dew point and wert bulb based on these direct measurements. For the most accurate readings, expose the ARH4 to the air you are measuring for a few minutes so that the sensors can come to equilibrium.

• Measures temperature and relative humidity percentage
• Calculates wet bulb and dew point temperatures
• Log relative humidity over time to help troubleshoot systems

Includes

• Digital Psychrometer and Hygrometer Accessory - ARH4
• 9V Battery (installed)
• Operator's Manual

ATIR3 Infrared Temperature Accessory Head by Fieldpiece

The Fieldpiece Non-contact Infrared Temperature Accessory with Laser Sight, model ATIR3, collects infrared energy (IR) and converts it to a mVDC signal that is proportional to the temperature being measured. The temperature measured is the average of all the temperatures in the 8:1 cone of viewability. The closer you are to the target, the smaller the area measured. The further away, the larger the area. The digital, non-contact ATIR3 converts the Fieldpiece "Stick" series meter, or electronic handle to a one-piece infrared, or IR, thermometer.

Designed for HVACR professionals, the Non-contact Infrared Temperature Accessory with Laser Sight, model ATIR3, measures infrared energy in it's cone of view and converts it into temperature readings on your meter using the mVDC scale.

• Measures temperature without contact
• 8:1 field of view
• Laser sight included
• Select °F or °C
• Great for fast surface temperature measurement

Includes

• Infrared Temperature Accessory - ATIR3
• 9V Battery (installed)
• Operator's Manual

AUA2 Milliamps & Microamps Accessory Head by Fieldpiece

Solve those "no heat" calls fast and efficiently with the Fieldpiece Milliamps & Microamp Accessory, model AUA2. The head converts microamps (for flame rectifier diode) and milliamps (for heat anticipators and control circuits) to a mV signal for direct current reading on any meter with mV ranges. For resolution of 0.1 micro/milliamps, use a meter that displays 0.1mV. The AUA2 includes quick connect and mini-plug adapters to convert your "stick" meter and electronic handles into a one-piece flame rectifier diode tester and heat anticipator checker

• Includes flame diode adapter kit (AQK3)
• Resolution: 0.1 for meters with 0.1mVDC
• Accuracy: DC: ±(1.0%rdg + 1dgt) AC: ±(1.5% + 2dgts)
• Max current: 200mA AC or DC
• No battery required

Like all of the Accessory Heads from Fieldpiece, the AUA2 gives you the ability to do more work from one small bag of tools. It is the only modular current instrument of its kind and provides you with valuable data in diagnosing "no heat" calls in the field when used with our meters, data logger and electronic handle.

Included

• Milliamps & Microamp Accessory - AUA2
• Flame Diode Lead Kit - AQK3
• Operator's Manual

AVH1 Volts Accessory Head by Fieldpiece

The Fieldpiece Voltage Accessory Head, model AVH1, converts volts to millivolts for use with our data loggers for direct display and recording of voltage through the meter's mV scale. Use it with the Fieldpiece Accessory Handles to record MIN and MAX while freeing up your meter for other tests. Cat III rated. Maximum voltage of 600V AC or DC.

Designed for HVACR, the Voltage Accessory, model AVH1, let's you log AC or DC voltage using our data logger model DL3 or get MIN or MAX volts when attached to our electronic handles, models EHDL1 and EH4W.

• Accuracy: DC: ±(0.5%rdg + 1 dgt); AC: ±(1.0%rdg + 4 dgts)
• Max voltage: 600V AC or DC
• Input impedance: 1MOhm
• Standard test leads plug in top
• Great for data logging
• Works with Fieldpiece accessory heads to free up your meter

Included

• Voltage Accessory - AVH1
• Operator's Manual

DL3 Data Logger by Fieldpiece

The DL3 Data Logger measures and records any parameter from any accessory head Instrument we offer. It holds up to 20,000 data points and can be set to record in a range from once every second to once every 999 hours. Record and export data in .xls format to your PC for use in work orders, troubleshooting and service contracts. A real-time clock time stamps every data point for pinpoint accuracy. Use multiple data loggers to monitor several parameters to make troubleshooting and commissioning easier. Combined with our accessory head instruments, we're comfortable saying the DL3 is the most versatile data logger for HVACR field service.

Designed exclusively for logging HVACR parameters the DL3 gives technicians an accurate, time stamped results in a compact design. Other features and benefits include:

• TRIG (trigger) switch position. Set DL3 to record only the data you need.
• Enhanced data scroll.
• Bright, blue backlight.
• Export data in .xls format.
• Record data points manually, automatically, or trigger to log outside a range.
• Real-time clock: second, minute, hour, day, month, year.
• All data points are time stamped.
• Multiple data sets of various parameters can be stored.
• Easy downloading to a PC.
• Cost-effective, multi-channel recording using multiple DL3 Data Loggers.
• 20,000 data points.
• Combine with the AAV3 Anemometer to easily determine CFM.
• Works with all Accessory Heads

Includes

• Expandable HVAC/R Data Logger - DL3
• IR to USB Data Cord for DL2/DL3 - RCBLDL5
• Fieldpiece Data Logger Software CD
• 9-Volt Battery (installed)
• Operator's Manual

HG2 HVAC Guide System Analyzer by Fieldpiece

The HVAC Guide® System Analyzer, model HG2, is the next generation hand-held diagnostic instrument that guides field technicians step-by-step through the most common and important HVAC system tests including: Target Evaporator Exit Temperature, Target Superheat, Superheat, Subcooling, Combustion Analysis and now the CheckMe!® test.

HVAC pros simply enter data on the INPUT FORM using Fieldpiece accessory heads or by manually inputting measurements from traditional tools such as a pressure gauge. Once the INPUT FORM is filled-in completely and the Customer ID entered, the technician presses Output. The OUTPUT FORM is displayed instantly, providing results of the test and possible corrective actions to take, as well as references to the HVAC Guide® System Analyzer Manual for further information.

The CheckMe!® test works the same way. The technician enters grant information and inputs data for several more parameters, including amp draw, using Fieldpiece accessory heads or standalone instruments. The results, based on information and data recorded for over 700,000 real-world HVAC systems, are displayed on the screen along with corrective actions until the unit passes the test. CheckMe!® contractors then review the results with Proctor Engineering to fulfill the program requirements. For more information, please check out the Product Flyer link at the top of the page.

The HVAC Guide software compiles all of the system info into a spreadsheet format that you can customize with your company logo and print off as a work order to leave with your customer via your PC.

The HVAC Guide® System Analyzer offers several benefits:

• Minimize call-backs
• Easier system analysis
• Faster testing and diagnosis
• Higher quality job
• Wider range of tests with less backup technical support
• Improve the technician's technical capability
• Test multiple parameters with one instrument
• Easy to use INPUT/OUTPUT forms to collect and analyze date
• Manually enter data using standalone instruments
• Download test data to a PC
• Easily print work orders for better customer service
• Include comprehensive CheckMe! switch position

Includes

• HVAC Guide® System Analyzer - HG2
• Dual-Temperature Accessory Head - ATH4
• Wet Bulb Thermocouple - ATWB1
• Dry Bulb Thermocouple - ATA1
• Carrying Case - ANC5
• Operator's Manual

HG3 Wireless HVAC Guide System Analyzer by Fieldpiece

The Wireless HVAC Guide® System Analyzer will reduce call-backs by giving you a wide variety of tests to diagnose HVACR systems and lower your customer's energy bills. It walks you step-by-step through each test procedure to make your job easier, faster and better.

When coupled with the new ET2W Wireless Transmitter (included with every HG3), the HG3 system turns every Fieldpiece Accessory Head into a wireless device, capable of sending measurements from up to 100 feet away. So you can take up to 13 measurements (12 wirelessly and one directly on the HG3) all at once to give you an live snapshot of the entire system.

WIRELESS Testing

Attach any Fieldpiece Accessory Head to the ET2W to view or log measurements on the HG3 in real-time. The HG3 has the capability to wirelessly and simultaneously read up to 12 wireless signals. A 13th accessory head can be attached directly to the HG3 to give you the ability to record 13 parameters at one time.

Test procedures are included for Superheat, Subcooling, Combustion Analysis, Target Evap Exit Temperature (temperature drop across the evaporator coil), CFM (air balancing), CheckMe!® Evaluation. and Service light set up are built into the HVAC Guide to streamline each test.

The HVAC Guide® System Analyzer also has a data logging switch position to record up to 13 measurements at one time. With the Display switch position view one parameter by connecting any Fieldpiece Accessory Heads directly or wirelessly. Do it right the first time, do it faster, easier, more completely, and avoid call-backs in the process

Features and Benefits

The HG3 holds up to 200 tests on its internal memory, so you can easily show your customers what's going on with their system, and what the recommended fixes are. You can even have them review the screen with you in real-time while you're receiving measurement data wirelessly.

In addition, all tests can be downloaded to a personal computer so you can not only print out your tests results for your customers, but you can also store all the data to reference the next time you are called to the job site.

You can also easily and accurately perform CFM tests because the HG3 does your calculations for your, automatically. The HG3 will calculate the average, max, and min air velocity for up to 13 grilles, then calculate the Total Return and Total Supply for the entire system.

• More Accurately Diagnose Systems with Real-Time Data
• 12 Wireless Parameters for Live Analysis
• Multi-parameter Data Logging
• Save Time by Eliminating Measurement Reconnections
• Monitor System While Making Adjustments
• Easy, One-time Set Up
• Minimize Call-back with Correct Diagnosis the 1st Time
• Instant Snapshot of Entire System

Includes

• Wireless HVAC Guide - HG3
• Wireless Handle - ET2W
• Dual Temp Accessory Head - ATH4
• Dry Bulb Thermocouple - ATA1
• Wet Bulb Thermocouple - ATWB1
• CD to Download Software
• Computer Cable to Transfer Data
• Nylon Carrying Case - ANC8

SMAN2 3 Port Digital Manifold by Fieldpiece

The SMAN2 Digital Manifold, is a three-port manifold that is a great partner if you alreay have a vacuum gauge. It's large, multi-line display shows simultaneous superheat and subcooling, target superheat, and pressures.

Plus the SMAN series are the only manifolds with the ability to perform a linear adjustment of the pressure sensors based on refrigerant type, temperature, and pressure, and it's so easy, you can do it right in the field.

By combining new technology with an intuitive, easy-to-use interface, the SMAN2 makes it easy for you to quickly maximize the efficiency of any A/C or refrigeration unit. And because they're built by the HVACR industry's leading innovator, you know it's packed with the features you want.

Target Superheat

• Automatically calculated from measurements taken
• No guesswork or manual calculations

Superheat and Subcooling

• Calculated and displayed simultaneously

Multiline Backlit Display

• Resistant to extreme temperatures
• Viewable up to 20' away

K-type Thermocouples

• Fast reacting
• Accurate temperatures
• Displays actual temperatures

Field Calibration

• Quck and easy
• Temperature
• 2-point pressure

Long Battery Life

• 500 hours on SMAN2
• 135 hours on SMAN3
• Constant battery status
• Auto power off

39 Refrigerants

• Built-in P-T charts

Carrying Case

• Easy to hang when not using
• Leave hoses & clamps attached

Includes

• Wet Bulb Thermocouple
• Dry Bulb Thermocouple
• Protective Case
• Operator's Manual

SMAN3 3 Port Digital Manifold with Micron Gauge by Fieldpiece

The SMAN3 automatically calculates target superheat, so you don't have to worry about guesswork or manual calculations. WIth the SMAN3 you also get a built-in micron gauge with resolution from 50 to 9,999. On top of that, the SMAN3's exclusive micron alarm allows you to set the alarm to a chosen micron level, and when the vacuum reaches that level, the alarm will sound, freeing you up to keep working when pulling a vacuum.

Plus the SMAN series are the only manifolds with the ability to perform a linear adjustment of the pressure sensors based on refrigerant type, temperature, and pressure, and it's so easy, you can do it right in the field.

By combining new technology with an intuitive, easy-to-use interface, the SMAN3 makes it easy for you to quickly maximize the efficiency of any A/C or refrigeration unit. And because they're built by the HVACR industry's leading innovator, you know it's packed with the features you want.

Target Superheat

• Automatically calculated from measurements taken
• No guesswork or manual calculations

Superheat and Subcooling

• Calculated and displayed simultaneously

Multiline Backlit Display

• Resistant to extreme temperatures
• Viewable up to 20' away

K-type Thermocouples

• Fast reacting
• Accurate temperatures
• Displays actual temperatures

Field Calibration

• Quck and easy
• Temperature
• 2-point pressure

Micron Gauge Alarm

• Alarm sound when chosen micron level is reached
• 50 to 9,999 resolution

Vacuum Stopwatch

• Tracks time vacuum pump's been working
• Length of time can indicate hidden issues

Long Battery Life

• 500 hours on SMAN2
• 135 hours on SMAN3
• Constant battery status
• Auto power off

39 Refrigerants

• Built-in P-T charts

Carrying Case

• Easy to hang when not using
• Leave hoses& clamps attached

Includes

• Wet Bulb Thermocouple
• Dry Bulb Thermocouple
• Vacuum Gauge in Microns
• Two K-type Thermocouples Pipe Clamps
• Protective Case
• Operator's Manual

SMAN3 with Hard Case

SMAN4 4 Port Wireless Digital Manifold with Micron Gauge by Fieldpiece

The SMAN4 is a 4-port, wireless digital manifold with a large 3/8" port for faster evacuations and recovery. With four ports and a built-in vacuum gauge, HVACR pros can now evacuate a system, pull a vacuum, add refrigerant and dial in the charge at one time, without having to hook and unhook any hoses.

To make things even easier, the SMAN4 wirelessly receives live indoor wet bulb and outdoor dry bulb, then automatically calculates real-time target superheat, and displays both the target superheat and actual superheat on the large, backlit display. Plus, the SMAN4 digital manifold displays actual subcooling and superheat simultaneously.

The SMAN4 manifold also wirelessly sends six measurements (indoor wet bulb, outdoor dry bulb, suction line temperature, suction line pressure, liquid line temperature, and liquid line pressure) to the Fieldpiece HVAC Guide System Analyzer, model HG3. The HG3 then combines the SMAN4 wireless measurements with wireless airflow measurements for full system analysis -- in real-time!

Wireless Measurements

• Sends all measurements to HG3 for full system analysis
• Receives indoor wet bulb and outdoor dry bulb wirelessly for live charging (if in wireless mode, both indoor and outdoor measurements must be sent wirelessly to the SMAN4)

Large 4th Port

• 3/8" port and 3/8' bore throughout for faster evacuations

Target Superheat

• Automatically calculated from measurements taken
• No guesswork or manual calculations

Superheat and Subcooling

• Calculated and displayed simultaneously

Multiline Backlit Display

• Resistant to extreme temperatures
• Viewable up to 20' away

K-type Thermocouples

• Fast reacting
• Accurate temperatures
• Displays actual temperatures

Field Calibration

• Quck and easy
• Temperature
• 2-point pressure

Micron Gauge Alarm

• Alarm sound when chosen micron level is reached
• 50 to 9,999 resolution

Vacuum Stopwatch

• Tracks time vacuum pump's been working
• Length of time can indicate hidden issues

39 Refrigerants

• Built-in P-T charts

Carrying Case

• Easy to hang when not using
• Leave hoses& clamps attached

Includes

• 4-port Wireless Manifold - SMAN4
• Pipe Clamp Thermocouples (2) - ATC1
• Wet Bulb Thermocouple - ATWB1
• Dry Bulb Thermocouple - ATA1
• Padded Drawstring Pouch - ANC10
• Operator's Manual

SRS2C Wireless Refrigerant Scale by Fieldpiece

Fieldpiece's SRS2C Wireless Refrigerant Scale is the only scale of its kind. The SRS2C delivers accurate measurements in a heavy duty design and eliminates clumsy wires that normally connect the display to the scale platform. The SRS2C features a wireless remote with a bright blue backlight and a flip-up magnetic 'hat' for easy reading. The heavy duty platform is constructed of solid aluminum with rugged rubber bumpers. A recessed tank cradle and diamond plate pad hold refrigerant cylinders firmly. The remote stores conveniently in the bottom of the platform. The SRS2C features push button zeroing (tare) and syncing between the remote and the platform and a 33-foot range.

The SRS2C Wireless Refrigerant Scale with Case is unlike any other refrigerant scale on the market with a heavy-hitting list of features and benefits:

• Wireless communication between the platform and remote control
• Remote stores in the body of the platform for convenient carrying
• Solid aluminum platform with rubber corners for rugged field use
• Diamond plated rubber pad keeps cylinders from sliding around the platform
• Easy synchronization between platform and remote
• Highly accurate weight sensor
• Magnetic hat on remote allows for convenient display location and hands free operation
• Remote remembers the last zero point, even after powering on and off
• Bright backlight to read remote display in any lighting
• Auto-power off conserves battery life
• Battery life for both the platform and remote control are visible at all times
• Wireless signal strength indicator
• Platform automatically goes into standby when the remote is turned off
• Long battery life

The SRS2C Wireless Refrigerant Scale is unique. The SRS2C is the first wireless refrigerant scale and was designed specifically for the rigors of HVACR field service. The remote's ergonomic design fits naturally in your hand. The ruggedized construction stands up to abuse most other scales can't handle. A long battery life (80 hours for the remote, 100 hours for the platform), along with standby modes that re-sync without losing your readings, allow you to weigh in and recover refrigerant without worry. The magnetic hat on the remote allows you to work with both hands free while keeping the display visible. You can even weigh in a charge while doing other maintenance or repairs because you don't have to baby sit the scale, just take the remote with you up to 33 feet away. That's especially handy when you're working on a contract with multiple units.

Includes

• Wireless Refrigerant Scale - SRS2C
• Platform and Remote
• Rugged Nylon Case with Carrying Strap
• Standard 9-volt Battery (remote) Installed
• 6 x AA Batteries (platform) Installed
• Operator's Manual

ATC1 Pipe-Clamp Thermocouple 3/8" to 1 3/8" for Air Conditioning by Fieldpiece

The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 3/8" to 1 3/8" jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC1 for most A/C units. The ATC1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached. The sensor's large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds. Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces.

ATF1 Rod K-Type Thermocouple for Fluids by Fieldpiece

The ATF1 is a K-type rod thermocouple for submerging into liquids and measuring temperature. Use with the ATEXT10 extension for easier maneuverability – especially with thermometers with K-type jacks on the face of the meter. The rod can withstand high temperatures up to 1472°F. Measures air temperature too. The cone tip can help in piercing semi-solids such as food, but it's not sharp enough for piercing ductwork. The ATF1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

ATS1 Disk K-Type Thermocouple for Surfaces by Fieldpiece

The ATS1, K-type thermocouple is great for measuring the temperature of flat surfaces. The disk tip on the thermocouple is designed to establish good thermal contact. There's no better way to measure a flat metal surface than the ATS1. Infrared gets a close temperature measurement but the ATS1 is more accurate. Fiberglass insulation withstands high temperatures up to 900°F. The ATS1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

ABM1 Blow-molded Digital Manifold Case by Fieldpiece

While the soft padded case that comes with the SMAN digital manifolds is great, some HVACR professionals like extra protection, so Fieldpiece offers the ABM1 blow-molded case. The rigid sides ensure the manifolds don't get knocked around, plus there is extra storage so technicians don't have to remove the refrigerant hoses for storage.

ABMK3 Blow-molded Refrigerant Leak Detector Case by Fieldpiece

The ABMK3 holds the Fieldpiece Advanced Infrared (IR) Refrigerant Leak Detector, model SRL2, or, our Heated Diode Refrigerant Leak Detector, model SRL8. It includes the RFE2 9-inch Flex Extension Probe and RRE2 9-inch Needle Tip Probe for use with both meters. Features rugged blow molded construction and stands up to the rigors of HVACR field service.

ANC10 Drawstring Padded Pouch for SMAN Manifolds by Fieldpiece

The ANC10 is a sturdy padded case that allows HVACR pros to hang their SMAN digital manifolds with the case on it. In addition, the opening at the bottom allows the hoses to be left on while not in use, while the drawstring tightens the cover around the manifold to keep them clean.

ANC2 Small Single Pocket Case by Fieldpiece

The Small Single Pocket Case, model ANC1, holds 1 small meter or 1 accessory head instrument. It's constructed of rugged nylon with padding for added protection. Features a rugged double zipper. The ANC2 comes standard with our SRPM2 Optical Laser Tachometer.

ANC3 Large Briefcase-Style Instrument Bag by Fieldpiece

The ANC3 Large Briefcase-Style Instrument Bag is our top of the line instrument case. Combined with our modularly expandable instruments and accessories, the ANC3 can haul a service truck full of tools to your job, over your shoulder. It has 14 pockets in all. It holds most any combination of your Fieldpiece gear: 3 meters and 10 accessory head instruments with room for plenty more, or, put in 6 standalones and their accessories, 2 meters and more. The combinations are almost endless. One thing's for sure, you can fit the test instruments you need to do the whole job easier, better and faster with the ANC3 over your shoulder. Features include rugged nylon construction, padding, durable pockets inside and out, a rugged zippers and a shoulder strap. Comes standard with our big Fieldpacks and doubles as a great laptop briefcase.

ANC5 Mail Pouch-Style Instrument Case by Fieldpiece

The Mail Pouch Style Instrument Case, model ANC1, easily holds 1 meter and 1 accessory head instrument with room for more. Features include rugged nylon construction, padding, a durable mesh pocket on the front with a nylon handle built-in. The ANC5 comes standard with the LT17A and LT16A Classic Style Meters. Get an extra for holding your work related receipts, business cards, hand tools, pens, note pads and more.

ANC6 Clear Front Instrument Case with Hanging Magnet by Fieldpiece

The Clear Front Instrument Case with Hanging Magnet, model ANC6, comes standard with our ST4 Dual-Temperature Standalone meter. It allows you to hang the meter out of the way when testing splits and monitor the LCD at the same time. Features include rugged nylon construction, clear front panel, a hanging magnet and Velcro belt loop combo, padding, a mini inside pocket for thermocouples, and a rugged double zipper The ANC6 is a great case for other standalones too.

ACDC6 600A AC/CD Current Clamp by Fieldpiece

Connect to any Digital Multi Meter with industry standard jacks and mV ranges to measure AC or DC current up to 600A. Jaw opens to 1.18".

AHDL1 Accessory Head Adapter by Fieldpiece

We designed the AHDL1 to provide the benefits of modular expandability to technicians who prefer digital multimeters other than our stick meters. The AHDL1 is the same shape and size as the top of our stick meters and works with all of our accessory head instruments. Simply plug in the banana jacks. The adapter handle allows you to easily connect our accessory head instruments to any DMM mV ranges both AC and DC on their meter. Our electronic handles convert any accessory head into a standalone instrument.

EH4W Wireless Electronic Handle with ET2W Wireless Transmitter by Fieldpiece

The EH4W Wireless Handle connects to any Fieldpiece accessory head to easily make your accessory heads into standalone wireless instruments. The EH4W handle can both measure whatever accessory head is attached directly to it, as well as receive a second measurement wirelessly from whatever accessory head is attached to the included wireless transmitter, model ET2W. In addition the EH4W can also send wireless measurements, so you can use it with any Fieldpiece wireless meter, manifold, or system analyzer. Wireless signals can be sent from up to 75' away, so you can take your wet bulb measurements and have the live data in your hand while working on the condenser.

ET2W Wireless Transmitter by Fieldpiece

The ET2W connects to any Fieldpiece Accessory Head to wirelessly send live measurements to any Fieldpiece wireless instruments from up to 100 feet away (30.5 meters).

AQK3 Flame Diode Adapter Kit by Fieldpiece

The AQK3 Flame Diode Test Adapter Kit allows you to plug into the flame diode circuit between the controller and the flame sensing rod to check for problems. Whether you're testing a system with a hot surface igniter or a standard burner and flame setup, the adapter kit includes both a pair of spade connector leads to enable easy connection from the AUA2 or a multimeter to quick connects, plus an adapter for controllers that require a mini-plug connection.

AOXP2 Manual Flue Pump with Trap by Fieldpiece

The AOXP2 Manual Flue Pump with Trap is included with our AOX2 Combustion Check Accessory Head. Features a water and contaminant trap to help maximize sensor life. A newly designed bulb stands up to the rigors of flue testing and manual pumps work better in cold weather than electronic pumps.

RAOX9 Replacement Parts Bag for AOXP2 by Fieldpiece

Maximize the sensor life on your Fieldpiece combustion testing equipment. Change the water trap filters and O-rings when you see signs of wear to keep your meter sensors clean and contaminant free. The RAOX9 comes with replacement water traps, O-rings and replacement thermocouple clips.

RCBLDL5 Replacement USB Cable for DL2 and DL3 by Fieldpiece

The RCBLDL5 is a replacement cable for Fieldpiece data logger models DL2 (USB model) and DL3. Get an extra and keep one in the service vehicle and one in the office.

RCR2032 Battery Replacement for SIR2, SC52, SC53 by Fieldpiece

When you're at the distributor this is the battery about the size of a nickel. It powers the SIR2, SC53 and SC53. Don't get caught without the power you need when you're on a call, keep an extra one or two RCR2032's in your bag to make your job easier, faster and better.

RFL83 Fuse 4-pack for LT83 and LT83A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 after serial number 120808 and model LT83A before serial number 70003091.

RFL83A Fuse 4-pack for LT83A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83A after serial number 70003091.

RFM70 Fuse 4-pack for LT16 and LT16A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT16 and LT16A.

RFS74 Fuse 5-pack for LT83 by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 before serial number 120808.

RL736 3-pack Battery Replacement for PLM2 by Fieldpiece

The Fieldpiece Lighted Extension Mirror model PLM2 takes three model RL736 batteries to shine light where you need it when you need it. Keep a set in your service bag so that you can read part numbers in dark places. About 2/3 the size of a dime.

RREF16 Replacement Reflective Tage for SR by Fieldpiece

The RREF16 replacement reflective tape pack works with our Optical Laser Tachometer model SRMP2. Use according to refector instructions found in the SRMP2 operator's manual.

Part-SRS2C Remote

HS36 Huge Gas Fieldpack

Fieldpiece Mega Pack

Student Starter Kit

Multi Temp Kit

Wireless Kit

PAL1 Alligator Clip Extension Tool by Fieldpiece

Makes lighting pilots a breeze even in under-floor mounted furnaces. Holds a match stick and extends to 24-inches. Chrome finish and pocket clip

PBS2 Magnetic Parts Grabber by Fieldpiece

This parts grabber has a strong magnet with a clawed hand gives your arm a 24-inch extension to grab out of reach parts. The claw helps you hook on to the parts for that little bit of extra force to get them moving out from under a unit. The magnet hangs onto them. Works as a great back scratcher too (we're not kidding). Sleek chrome finish and pocket clip look good in your pocket when not in use.

PLF2 Pocket LED Flashlight by Fieldpiece

Don't get caught in the dark again. Keep the PLF2 in your shirt pocket. This compact yet bright LED flashlight packs a lot of power. The PLF2 puts out the same amount of light you'd expect from a much larger flashlight. Besides the brightness, the best thing about it is its size. Under 5-inches long.

Extension mirror

SCP2 Clog Popper by Fieldpiece

The SCP2 was invented by a HVAC technician with 30 years of experience in the field. It is the most convenient, cost effective, easiest and fastest way to clear a condensate line. With the SCP2 helps the technician do more by allowing him to clear

SIP3 Shirt Pocket IR Thermometer by Fieldpiece

The SIP3 is great for quick air register temps. With a 1:1 field of view, the compact design makes taking accurate temperature readings easier, better and faster. The SIP3 has a 1°F/°C resolution and has a -27°F to 230°F temperature range and features Auto-Power Off (APO) to conserve battery life. It also has a rubberized grip, low battery indicator, and is water resistant.

SPDM1 Pocket DMM by Fieldpiece

The SPDM1 features non-contact voltage and include many of the parameters you use every day for HVAC/R field service. The leads store in the back of the body of the instrument. Measures volts AC/DC, ohms, continuity and includes a diode check. A great backup meter and a solid performer in the field.