Gas Leak Detectors and CO Meters

0632 0316 316-1 Gas Leak Detector includes battery by Testo

The testo 316-1 gas leak detector quickly detects even the smallest leaks.

• Flexible measurement probe for inaccessible pipes
• TopSafe case protects from dirt and impact (optional)
• Audible alarm if limit value is exceeded
• Optical alarm
• Flexible measurement probe for hard to reach locations
• Optical and audible alarms signal when limits are exceeded
• TopSafe case protects from dirt and impact (optional)
• DVGW approval

0632 0317 315-2 Ambient CO Meter with Alarms by Testo

Use testo 315-2 to check the CO level in ambient air. Even low concentrations of the highly poisonous gas are detected. In this way, you can judge whether the burner flue gases are being fully drawn off.

• Reliable warning of CO poisoning
• DVGW approval
• Adjustment of different alarm limits
• Printout with date/time and recommended value (alarm limit)
• With calibration protocol
• TopSafe, protection case for tough applications
• Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit)

0632 3170 317-1 Flue Leak Detector by Testo

The testo 317-1 flue gas spillage detector reliably detects escaping heating gases. The practical instrument immediately gives off a visual and audible alarm. It is therefore not necessary to actually see the detector. The bendable probe facilitates applications in confined areas.

• Reliable recognition of escaping flue gases
• Bendable measurement probe for points which are difficult to access
• Audible and visual alarm
• DVGW approved

0632 3172 317-2 Gas Leak Stick by Testo

Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display.

• Shows gas concentration in visual bar display
• Sensor self-test following switch-on
• Audible confirmation of readiness to operate
• Increasing alarm sounds with increasing gas concentration
• Continuous sound if alarm threshold is exceeded
• Battery monitoring with optical display
• Self-test function

0632 3173 317-3 Ambient CO Stick by Testo

The testo 317-3 CO monitor detects the presence of carbon monoxide in the surrounding area and warns the user both visually and audibly about dangerous gas concentrations e.g. when installing and servicing gas heaters.

• 3 year warranty on CO sensor
• Visual and audible alarm
• No zero phase, instrument can be used immediately
• Adjustable alarm threshold
• CO zeroing at site
• Self-test function

0563 3100 01 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy – even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 3110 01 310 Residential Analyzer Kit with Printer by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structure. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy – even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• IR printer
• 2 rolls of thermal paper
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0560 3162 316-1 Gas Leak Detector with Flexible Probe by Testo

If you like to keep things simple, we recommend the testo 316-1 gas leak detector: Identifying and locating leaks or even reading off concentration values in ppm or %LEL (lower explosive limits) are all exceptionally easy. No training required thanks to the intuitive traffic-light scale on the head and the display illumination.

The testo 316-1 gas leak detector makes it particularly easy to identify and locate leaks. The multicolor LED on the sensor head and the multicolor display, as well as the flexible probe for hard-to-reach places, support you intuitively and precisely in leak detection.

• Acoustic and visual alarm via multi-color LED on the sensor head
• Display of ppm / vol% / %LEL on the instrument
• Sensor self-test and automatic zeroing
• Flexible probe for locations that are difficult to access

0560 3161 316i Gas Leak Detector with Flexible Probe by Testo

Ideal if you wish to rule out or locate leaks in gas fittings – equipped with simple traffic light LED on the head and self-explanatory bar scale. In addition, ppm values and even %LEL (lower explosive limit) can be called up and documented via the app.

With the testo 316i gas leak detector, you can locate leaks easily and precisely. The acoustic and visual alarm via the multicolor LED on the sensor head and the self-explanatory bar scale ensure simple leak detection.

• Multi-colour LED (visual and acoustic alarm
• Sensor self-test and automatic zeroing
• Flexible measuring probe for locations that are difficult to access
• Connection to testo Smart App for documentation and ppm display
• Battery-powered

0632 0336 316 Ex, Gas Leak Detector by Testo

Proof of gas and leakage localization on gas pipes and installations in indoor and outdoor areas The testo 316-EX, which conforms to the guideline 94/9/EG (ATEX), is a multi-range gas detector with Ex protection for the gases methane, propane and hydrogen. The gas concentrations are measured by the semi-conductor sensor in the ppm range and are shown in the display with a resolution of 1ppm.

• Flexible measurement probe for inaccessible pipes
• 1 ppm resolution on display
• Indicator suppression for comfortable locating of the leak
• 94/9/EG (ATEX) conform

Kit Includes:

testo 316-EX electronic gas leak detector with EX protection, including batteries, case, Allen key and calibration protocol

0632 3162 316-2 Gas Detector by Testo

The testo 316-2 is extremely user-friendly and ideally suited to fast check measurements thanks to its integrated pump, its optical presentation of the gas concentrations detected, and the integrated rechargeable battery.

• Optical and audible alarm with bar display for increasing and dangerous gas concentrations
• Trend display shows maximum leakage
• Integrated pump
• Flexible measurement probe for inaccessible places
• Earphone connection for secure leakage localization in loud surroundings
• High duration of use thanks to rechargeable battery

Includes:

testo 316-2 gas leak detector, power adaptor, earphones