- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Testo 310 Residential Analyzer Kit with Printer - 0563 3110 01
Item #:
0563-3110-01
Brand:
Testo
Share this product:
0563 3110 01 310 Residential Analyzer Kit with Printer by Testo
The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structure. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy – even if you only have one hand free.
Kit Includes:
- testo 310 analyzer
- probe & hose
- silicon tubing
- extra particulate filters (5)
- pressure plugs (5)
- AC power supply/recharger (USB)
- calibraton certificate
- IR printer
- 2 rolls of thermal paper
- hard case
- Robust and light instrument for daily use
- 30 seconds sensor zeroing
- O2 and CO measurement
- Integrated magnets for easy fixing to burner
Applications:
- Flue gas measurement
- Draught measurement
- Ambient CO measurement
- Pressure measurement
| Display | Backlit 4-line display |
| Storage temperature | -20 to +50 °C |
| Operating temperature | -5 to +45 °C |
| Weight | Approx. 700 g |
| Dimensions | 201 x 83 x 44 mm |
| Probe type Type K | Meas. Range: 0 to +400 °C Accuracy: ±1 °C Resolution: 0.1 °C |
| Probe type CO | Meas. Range: 0 to 4000 ppm Accuracy: ±20 ppm (0 to 400 ppm); ±1,5% of mv (401 to 2000 ppm); ±10% of mv (2001to4000 ppm) Resolution: 1 ppm Response time: 60 s |
| Probe type Differential pressure | Meas. Range: -40 to 40 hPa Accuracy: ±0.5 hPa Resolution: 0.1 hPa |
| Probe type Draught measurement | Meas. Range: -20 to +20 °C Accuracy: ±0.03 hPa (-3.00 to +3.00 hPa); ±1.5% of mv (remaining range) |
| Probe type Exhaust gas loss measurement | Meas. Range: 0 to 99.9% Resolution: 0.1% |
| Probe type Electrochemical measurement O2 | Meas. Range: 0 to 21 Vol. % Accuracy: ±0.2 Vol. % Resolution: 0.1 Vol. % |
| Probe type Efficiency Measurement (Eta) | Meas. Range: 0 to 120 % Resolution: 0.1% |
