1-866-4 JJSTECH(1-866-455-7832)

Hanna EC/TDS Mini-Controller, Range 0.00 - 10.00 mS/cm, 12VDC - BL983317-0

Item #:
BL983317-0
Brand:
Hanna Instruments
Hanna EC/TDS Mini-Controller, Range 0.00 - 10.00 mS/cm, 12VDC - BL983317-0
$200.00
Qty

Discontinued

Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Hanna EC/TDS Mini-Controller, Range 0.00 - 10.00 mS/cm, 12VDC - BL983317-0

Hanna EC/TDS Mini-Controller, Range 0.00 - 10.00 mS/cm, 12VDC - BL983317-0

$200.00

Discontinued


BL983317-0 EC/TDS Mini-Controller, Range 0.00 - 10.00 mS/cm, 12VDC by Hanna Instruments

BL 983317 is a panel mounted mini controller with an output relay that has been designed for easy, affordable installation in tight spaces—ideal for simple yet effective process control.

This instrument is provided with automatic compensation for variations in temperature. The probe (not included) is easy to clean and requires very little maintenance. The calibration is performed at one point, through a trimmer.

All wiring and connections to external devices are done through the terminals on the rear panel. The multicolor LED continuously indicates if the controller is in measurement, dosing or alarm mode.

Users can choose automatic or manual dosing mode by a switch on the front panel. Manual control is particularly useful during maintenance operations because it permits operators to enable or disable the dosing relay according to need. To help prevent overdosing, the overtime control system advises users when the relay is active too long.

  • Easy to handle
  • Fire retardant casing
  • Selectable overdose protection system
  • Splash resistant cover

Order Information:

BL 983317-0 (12 VDC), BL 983317-1 ( 115/230V), are supplied with mounting brackets, transparent cover and instruction manual.

Range 0.00 to 10.00 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.
Probe HI 7632-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included)
Temperature Compensation Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C
Calibration manual, with CAL trimmer
Dosing Relay maximum 2A (fuse protected), 250 Vac, 30 VDC, contact close when measure < set point
Setpoint adjustable from 0 to 10 mS/cm
Overtime adjustable, typically from 5 to approx. 30 minutes
Power Supply 12VDC
Dimensions 79 x 49 x 95 mm (3.1 x 1.9 x 3.7’’)
Weight 200g (7.1 oz)

Datasheets & User Manuals

Questions & Answers