- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna Conductivity Analog Controller with Input from Probe or Transmitter, 0.1 µS/cm Resolution - HI8931DN
Item #:
HI8931DN
Brand:
Hanna Instruments
Share this product:
HI8931DN Conductivity Analog Controller with Input from Probe or Transmitter, 0.1 µS/cm Resolution by Hanna Instruments
HI 8931 is a panel mounted conductivity controller designed for simplicity of use. For in-line applications, use the HI 7635 probe, while for tanks the HI 7638 with external threads is recommended. These probes are provided with a built-in NTC sensor for temperature compensated conductivity measurements.
HI 8931 also features a direct connection up to 20 m (67'), without needing to amplify the signal to the conductivity probe.
Using the HI 8931 in conjunction with a 4-20 mA output transmitter (HI 8936 or HI 8936L series) will assure a strong, interference free signal at distances up to 300 meters (1000').
- Both electrode and transmitter compatible inputs accepted
- Selectable manual ON, OFF and automatic dosing control with indicator
- Built-in auto-diagnostic function for offset and slope
- Both 4-20 and 0-20 mA output user selectable, all in one instrument
- Backlit LCD
- Transparent splash-proof cover included
- Operational mode LED indicators
Order Information:
The HI 8931 series is supplied with mounting brackets and instructions.
Range | 0.0 to 199.9 µS/cm |
Resolution | 0.1 µS/cm |
Accuracy @ 20 °C | ±2% F.S. (excluding probe error) |
Input from Transmitter | HI 8936D / DL |
Temperature Compensation | automatic, 0 to 60°C with ß=2%/°C; see also transmitter HI 8936 |
Inputs | DIN (probe) or 4-20 mA (transmitter) |
Conductivity Probe | HI 7635 for in-line applications or HI 3001D for flow-thru (not included) |
Calibration | manual, two point, through offset and slope trimmers |
Recorder Output | 0 to 20 mA or 4 to 20 mA (isolated) |
Setpoint and Alarm Relay | 1, Isolated, 2A, max. 240V, resistive load, 1,000,000 strokes |
Setpoint Range | 0.0 to 199.9 µS/cm |
Alarm Range | 0.0 µS and 100.0 µS |
Dosing Control | OFF/AUTO/ON with selection switch |
Over Dosing Control | adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel |
Backlight | continuous on |
Power Supply | 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz |
Enclosure | flame retardant ABS body and front panel; transparent splash-proof front cover |
Environment | -10 to 50°C (14 to 122°F); RH max 95% non-condensing |
Panel Cutout | 141 x 69 mm (5.6 x 2.7") |
Weight | 1 kg (2.2 lbs.) |