- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna pH Analog Indicator with Self Diagnostic Test - HI8510
Item #:
HI8510
Brand:
Hanna Instruments
Share this product:
HI8510 pH Analog Indicator with Self Diagnostic Test by Hanna Instruments
HI 8510 is ideal for monitoring pH in process control. It can provide highly accurate pH measurements and display values on the easy to read LCD. BNC input, amplified probe input and input from transmitter are supported.
Designed for easy and fast installation, the HI 8510 is provided with membrane keypads on the front panel, large display, and auto-diagnostic functions to check pH electrode and instrument status. These instruments also provide ±5V power output and input terminals for amplified electrodes.
The front panel is protected behind a transparent splash-proof cover.
- Inputs: BNC connector, Direct wire connection with amplified probe (supports HI 1006 series probes) and 4-20 mA from a transmitter
- Extended temperature compensation range: -20 to 100°C
- Supports potential matching pin connection
- Both 4-20 and 0-20 mA analog output
- ±5V outputs for amplified electrodes
- Backlit LCD
- Auto-diagnostic tests for pH electrode and instrument status
- Operational mode LED indicators
- Designed for easy panel mount installation
- Transparent splash-proof cover included
Order Information:
The HI 8510 is supplied complete with mounting brackets and instructions.
| Range | 0.00 to 14.00 pH |
| Resolution | 0.01 pH |
| Accuracy @ 20 °C | ±0.02 pH (0 to 100 °C) ±0.05 pH (-20 to 0 °C) ±0.5% (input transmitter) |
| Input | high impedance 1012 Ohm; reference and matching pin inputs are available; 4-20 mA |
| Power Output | ±5 Vcc; 150 mA max load for amplified electrodes |
| Calibration | offset: ±2 pH with OFFSET trimmer slope: 80 to 110% with SLOPE trimmer |
| Temperature Compensation | fixed or automatic with Pt100, from -20 to 100°C (-4 to 212°F) |
| Recorder Output | 0-20 mA or 4-20 mA (isolated) |
| Backlight | continuous on |
| Power Supply | 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz |
| Enclosure | flame retardant ABS body and front panel; transparent splash-proof front cover |
| Environment | -10 to 50°C (14 to 122°F); RH max 95% non-condensing |
| Panel Cutout | 141 x 69 mm (5.6 x 2.7’’) |
| Weight | 1 kg (2.2 lb.) |
