- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna pH Analog Controller with Dual Output and Self-Diagnostic Test - HI8711
Item #:
HI8711
Brand:
Hanna Instruments
Share this product:
HI8711 pH Analog Controller with Dual Output and Self-Diagnostic Test by Hanna Instruments
HI 8711 allows the selection of two set points with two independent outputs for acid and alkaline dosages.
- Inputs: BNC connector, Direct wire connection with amplified probe (supports HI 1006 series probes) and 4-20 mA from a transmitter
- Auto-diagnostics to verify offset and slope calibration and electrode contamination/deterioration
- Selectable manual ON, OFF and automatic dosing control for alkaline, acid and REDOX dosing with indicator
- Dual set point with two independent dosing outputs
- Extended temperature compensation range: -20 to 100°C
- Supports potential matching pin connection
- Both 4-20 and 0-20 mA output
- ±5V outputs for amplified electrodes
- Fail Safe Function–the alarm relay is activated at power down
- Operational mode LED indicators
- Backlit LCD
- Transparent splash-proof cover
Order Information:
The HI 8711 is supplied with mounting brackets and instructions.
Range | 0.00 to 14.00 pH |
Resolution | 0.01 pH |
Accuracy @ 20 °C | ±0.02 pH (0 to 100 °C) ±0.05 pH (-20 to 0 °C) ±0.5% (input from transmitter) |
Input | high impedance 1012 Ohm; reference and matching pin inputs are available; 4-20 mA |
Power Output | ±5 Vcc; 150 mA max load for amplified electrodes |
Calibration | offset: ±2 pH with OFFSET trimmer slope: 80 to 110% with SLOPE trimmer |
Temperature Compensation | fixed or automatic with Pt100, from -20 to 100°C (-4 to 212°F) |
Recorder Output | 0-20 mA or 4-20 mA (isolated) |
Setpoint Relay | 2, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected) |
Setpoint Range | alk. set: from 0.00 to 14.00 pH acid set: from 0.00 to 14.00 pH |
Alarm Relay | 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected) |
Alarm Range | 0.2 to 3.00 pH |
Dosing Control | OFF/AUTO/ON with selection switch |
Over Dosing Control | adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel |
Backlight | continuous on |
Power Supply | 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz |
Enclosure | flame retardant ABS body and front panel; transparent splash-proof front cover |
Environment | -10 to 50°C (14 to 122°F); RH max 95% non-condensing |
Panel Cutout | 141 x 69 mm (5.6 x 2.7") |
Weight | 1 kg (2.2 lb.) |