Testo External Temperature and Humidity Probe for Testo 160 E and 160 THE Wi-Fi Data Loggers - 0572 2156

0572 2156 External Temperature and Humidity Probe for Testo 160 E and 160 THE Wi-Fi Data Loggers by Testo

Normally, it is difficult to hide the data logger inside the display cabinet. The testo digital temperature / humidity probe (1.5" x 0.63" / 36 x 16 mm) can be hidden within the case base showing only a small paintable vent cap and the bushing's collar. The data from the probe transfer to the Wi-Fi logger over a thin 1.7 ft. / 0.6 m or an 8.2 ft. / 2.5 m extension cable. The maximum length of combined extension cables is 32.8 ft. / 10 meters.

Applications for the temperature and humidity probe

The temperature and humidity probe is ideal for use in museums, galleries and other exhibit application. Use the high-precision temperature and humidity probe (with external data logger) to measure the temperature and relative humidity in display cabinets. The supplied base plate bushing with an O-ring prevents leakage of external air. Monitor the micro-climate in your display cabinet to see if the artwork maintained at optimal environmental conditions, or if the silica gel pellets need replacing.

Smart probe calibration

The temperature and humidity probe offers maximum digital measurement reliability. As the processing of measuring values is done within the probe, the quality of the measurement is not affected by the length of the cable between the Wi-Fi data logger and the probe. The probe can be sent in for calibration on its own (without the data logger) because the calibration points are stored internally.

• Tiny temperature and humidity probe for use in display cases
• Doesn't effect the air exchange rate in the display case thanks to the wall bushing with an O-ring seal
• "Smart probe" holds internal calibration points
• Measurement range: 0 to 100% relative humidity; temperature 14 to 122 °F (-10 to +50 °C)

Includes:

1 x temperature and humidity probe with plug-in cable (length 1.7 ft. / 0.6 m), base plate mount bushing, and factory calibration document.