- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Sensorex CX2000 Conductivity Transmitter/Controller, 4-20mA, VAC, Relays, 1/4 DIN
Item #:
SEN-CX2000
Brand:
Sensorex
Share this product:
CX2000 Conductivity Transmitter/Controller, 4-20mA, VAC, Relays, 1/4 DIN by Sensorex
The CX2000 is a full-featured Conductivity or Resistivity transmitter/controller. Simply power up your CX2000 with 110-240V AC power and you get a controller with a wide range of useful features:
2 relays, 1 wash control, 2 each 4-20mA outputs (Cond & Temp or Resistivity & Temp).
Calibration is simple with preset standards and can be password protected with a programmable security code.
Mounting choices include: wall or panel.
The large LCD display with auto-sense backlight and contrast adjust makes the CX2000 display so it can be easily viewable in all areas.
Features:
- Hz4-20mA outputs for conductivity or resistivity + temp
- 2 Hi/Lo Relays for controlling alarms, pumps and more
- Large LCD display with auto-sense backlight and contrast setting
- NEMA 4X, IP65 enclosure
- Sample averaging to enhance stability
- Compatible with Sensorex CS8000 and CS150 series sensors
| Measuring Range | Conductivity: | 0.000 uS/cm -200.0 mS/cm in 5 ranges 0.01/.01/1 uS/cm, 0.01/0.1mS/cm resolution, +/-1% Accuracy (+/- 1 digit) |
| Resistivity: | 0.00-20.00 MΩ • cm, 0.01 MΩ • cm resolution, +/-1% Accuracy(+/- 1 digit) | |
| Temperature Range | -30 °C to 130 °C, 0.1 °C resolution, 0.2 °C accuracy | |
| Calibration Mode | Automatic with built-in standard solutions manual cell constant adjustment | |
| Cell Constants | 0.01, 0.05, 0.1, 0.5, 10/cm fixed or freely selectable 0.0080 - 19.99/cm | |
| Analog Output 1 | Isolated DC 0/4 -20mA, corresponding to conductivity or resistivity. Max load 500 Ω. | |
| Analog Output 2 | Isolated DC 0/4 -20mA, corresponding to temperature output. Max load 500 Ω. | |
| Set-Points | Contact: 240V AC, 5A max Activate: setpoints Hi/Low, Hi/Hi, Low/Low, ON/OFF |
|
| Enclosure | NEMA 4X IP65, with push-button control pad. HWD: 96 mm (3.77”) x 132 mm (5.20”), 1/4 DIN | |
| Panel Cut-Out | 93mm (3.66”) x 93mm (3.66”) | |
| Weight | approx. 0.50kg (1.1lb) | |
| Mounting Options | Panel or Wall Mount | |
| Ambient Temperature | 0 ° C to 50 ° C | |
| Storage Temperature | -10 ° C to 70 ° C | |
| Temperature Compensation | NTC 30K or Pt1000 RTD with automatic compensation or manual | |
| Temperature Coefficient | Linear comp 0.00-40.00%, Non-linear comp for natural waters | |
| Power Requirement | 100-240V AC +/- 10%, 5W max, 50/60 Hz4 | |
