Tents & Shelters - Fiber Optic Splicing Tent

6705 Ground Tent, Yellow and Gray, Fiber to the Home, 6.5ft Tall by Pelsue

The Pelsue quick fold design allows this tent to be erected and ready for work in seconds. Heavy duty fabrics, waterproof coating, sealed seams, fiberglass rods, reinforced rod-end pockets and metal hubs provide years of service in the field. The tent's snug fit on the work surface side, and low-profile access door keep wind, dust, rain and snow out.

Features of the Fiber to the Home Shelter

• Quick fold design, setup in less than 60 seconds
• Heavy Duty Water/Fire/UV resistant fabrics
• Rust proof Fiberglass rods
• Water tight seams
• Access door with ties to hold open

6508LG Fiber Optic Splicing Tent, 8' x 8', with Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6508LGF Fiber Optic Splicing Tent, 8' x 8', with Standard Floor and Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6508LGH Fiber Optic Splicing Tent, 8' x 8', with Heavy Duty Floor and Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6506FSGH Fiber Optic Splicing Tent, 6 x 6', White/Black Rear, Rear Wall Zipper Cable Slot, with Case by Pelsue

This portable tent features improvements specifically for fiber splicing. Including a large rear access slot for large truck cables. With a spacious interior there is more than enough room for your equipment and a collapsible table. The tent has two side vents, with fabric mesh screening which allows for additional ventilation and light to get in while keeping insects out. The front side of the tent also functions as a roll-up door, and includes double sided zippers to allow for easy entry and exit. Both the roll-up door and the two side vents can be secured with built in Velcro straps. The back features two locking zippers to facilitate cable and fiber access into the tent, while minimizing the unwanted light. As always the tent material is Fire/UV/Water resistant to ensure a comfortable working environment regardless of the weather, and comes with a case.

Features of the Fiber to the Home Shelter

• Large 14" cable access door, includes double-sided zipper, also suitable as a ventilation/hose pass-through.
• Solar blocking (black) Material on all interior surfaces-Heavy duty frame for increased wind resistance
• Webbing loops on all four corners, allows corners to be secured with ground stakes if necessary
• Tie down cords on both exterior sides and rear, for use with ground stakes if necessary
• Roll-up front door, with two double sided heavy-duty zippers, and tie-offs at the top of the tent to secure door when not in use
• Two oversized black mesh windows, one on each of the sides (not front or rear), for additional light and/or circulation

6508FS Fiber Optic Splicing Tent, 8' x 8', White/Black Rear, Rear Wall Zipper Cable Slot, with Case by Pelsue

This portable tent features improvements specifically for fiber splicing. Including a large rear access slot for large truck cables. With a spacious interior there is more than enough room for your equipment and a collapsible table. The tent has two side vents, with fabric mesh screening which allows for additional ventilation and light to get in while keeping insects out. The front side of the tent also functions as a roll-up door, and includes double sided zippers to allow for easy entry and exit. Both the roll-up door and the two side vents can be secured with built in Velcro straps. The back features two locking zippers to facilitate cable and fiber access into the tent, while minimizing the unwanted light. As always the tent material is Fire/UV/Water resistant to ensure a comfortable working environment regardless of the weather, and comes with a case.

Features of the Fiber to the Home Shelter

• Large 14" cable access door, includes double-sided zipper, also suitable as a ventilation/hose pass-through.
• Solar blocking (black) Material on all interior surfaces-Heavy duty frame for increased wind resistance
• Webbing loops on all four corners, allows corners to be secured with ground stakes if necessary
• Tie down cords on both exterior sides and rear, for use with ground stakes if necessary
• Roll-up front door, with two double sided heavy-duty zippers, and tie-offs at the top of the tent to secure door when not in use
• Two oversized black mesh windows, one on each of the sides (not front or rear), for additional light and/or circulation