eXact 10mL Strips/Reagents

481652 Pool Check eXact Reagent For Cyanuric Acid by ITS

The eXact™ Reagent CY (481652) offers safe and convenient digital Cyanuric Acid testing for your pool. For use with the eXact™ 3 and 9 meters, eXact™ Reagent CY is a liquid reagent that eliminates the need for “difficult to read” Cyanuric Acid tests with color charts.

Detection Range: 0 - 200 mg/L
Packaging: Bottle of 100 tests

Use with: eXact® 1-3, Xtra, and EZ

481647 Pool Check eXact Strip For Free Chlorine by ITS

The eXact™ Strip Cl Free (481647) offers the safest and most convenient delivery system for your Free Chlorine testing with the eXact™ Meter. All reagents, as identified in the Standard Methods AWWA Handbook (4500-Cl G.), are contained in the eXact™ strip pads.

Detection Range: 0-5.00 mg/L
Packaging: Bottle of 50 eXact strips

Use with: eXact® 1-3, Xtra, and EZ

481648 eXact DPD-3 Strip for Water Quality Testing, Bottle of 50 (10 ml) by ITS

This eXact® Strip DPD-3 (Potassium Iodide) is to be used in conjuction with an existing eXact® Strip DPD-1 sample. To get Total Chlorine results: Continue testing by adding to same DPD-1 test portion, one eXact® Strip DPD-3 and for 0 seconds move eXact® Strip with back and forth motion (at gentle rate of about two moves per second). This motion releases reagents and mixes simultaneously. Remove Strip and discard in trash. Allow chemistry to form full color by waiting two minutes. Take photometer reading displayed and record for future reference. This reading is Total Chlorine concentration as parts per million (ppm) or milligrams per Liter (mg/L).

• DPD testing as specified in 4500-CL G
• No undissolved solids when testing cold (5ºC) water
• 20 second test methodology
• Safe, immobilized chemistry
• Replaces tablets, powders and liquids
• Works in your 10mL DPD meter/kit
• Replacement for HACH® DPD Free Chlorine 10 mL # 2105569
• Replacement for HACH® DPD Total Chlorine 10 mL # 2105669
• Detection Levels: 0.00-6.0 (ppm)

481670 eXact Strip DPD-4 for Water Quality Testing by ITS

eXact® Strip DPD-4 offers users a new, more convenient, delivery system for DPD. With DPD eXact® Strip there are no more tablets to crush, powders to spill, glass ampoule to break, or dispensers that release irritating dust. All required reagents are precisely measured and impregnated on a test strip pad. Simple dip the strip into a 10mL water sample for 20 seconds with back and forth motion, remove, discard the strip, and immediately read in your chlorine meter. eXact® Strip DPD-4 is compatible with a wide range of existing meters from manufacturers such as Hach®, LaMotte®, Orion®, WTW®, and others.

• DPD testing as specified in 4500-CL G
• No undissolved solids when testing cold (5ºC) water
• 20 second test methodology
• Safe, immobilized chemistry
• Replaces tablets, powders and liquids
• Works in your 10mL DPD meter/kit
• Replacement for HACH® DPD Free Chlorine 10 mL # 2105569
• Replacement for HACH® DPD Total Chlorine 10 mL # 2105669
• Detection Levels: 0.00-6.0 (ppm)

481623 WaterWorks Total Iron Total Iron for Water Quality Testing by ITS

The WaterWorks™ Total Iron visual test for water quality testing detects ferric (Fe+3) as well as ferrous (Fe+2) forms of iron. This test makes accurate total iron testing easier and does not require a meter. Test results are quickly available in only 3 minutes after following a simlpe test procedure.

WaterWorks™ Total Iron visual test offers an ideal testing method for ensuring drinking water has iron levels below the UDEPA recommended maximum contaminate level of 0.3 ppm. Detection levels for this visual test are 0, 0.3, 0.5, 1, 3, 5 mg/L (ppm). The test kit contains 50 individually wrapped foil powder pillows with a color chart card. WaterWorks™ Total Iron (Fe+2 / Fe+3) is the quick solution for testing total iron concentrations in drinking water.

Detection Levels: 0, 0.3, 0.5, 1, 3, 5 mg/L (ppm)

eXact EZ Strips for Water Quality Testing