eXact 10 Photometers

486699 eXact Micro 10 Photometer, Bulk by ITS

The eXact® Micro 10 is the first meter to directly read Combined Chlorine with 0.01 precision and no math required!

Industrial Test Systems, Inc. (ITS) introduces a new photometer using a patented method and technologies that offer faster, safer, easier, and more precise water testing. The eXact® Micro 10 offers ten modes that provides direct read capabilities for Combined Chlorine, Free Chlorine, Total Chlorine, Cyanuric Acid, Copper,Bromine, Total Alkalinity, Ozone, Calcium Hardness, Phosphate, pH and Chloride/Salt.

Highlights:

• Over 10 Direct read parameters (Combined Chlorine, Free Chlorine, Total Chlorine, Cyanuric Acid, Copper,Bromine, Total Alkalinity, Ozone, Calcium Hardness, Phosphate, pH and Chloride/Salt).
• First meter to directly read Combined Chlorine with 0.01 Precision and no math required! (Patented for use in accordance with U.S. Patents Numbers 7333194)
• Built-in, permanent cell (no loose glass or plastic cells; simply fill or dip into water)
• Automatic countdown timer
• 160 test memory (saves last 20 tests per menu)
• Incorporates EZ-3 Testing Method using the eXact® Strip technology (3-steps in under 30 seconds using safe and reliable reagent dispersion)
• No-slip grip housing
• Lightweight (weighs only 6 oz with batteries installed)
• Waterproof meter (IP-67) & floats
• Easy-to-read LCD display
• Environmentally friendly (recyclable parts & uses 60% less reagents than 10mL sample tests)
• No color matching
• Proprietary optics (allow for accurate testing without cap, though available)
• CE certification
• 2 - year Warranty with satisfaction guarantee

The eXact® Micro 10 is EPA-compliant for Free and Total Chlorine regulatory testing. It's ideal for residential, commercial, and municipal testing. With a 4 mL sample cell it's environmental friendly using less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution.

Why pool professional need the eXact® Micro 10

The FAS-DPD drop test has been a favorite test for many pool service personnel for the last several years for testing pools or spas for Free Chlorine, Total Chlorine, and Bromine (total). This test was adopted by the professionals because you could detect 10 PPM and higher, the test is accepted by Health Departments, and the test does not require for you to distinguish between shades of pink. These benefits drove an almost universal adoption of the FAS-DPD test.

But the professionals had plenty to complain about the short comings of their FAS-DPD drop test kits:

• The titration for 10 PPM chlorine required a lot of drops to be counted ( 50 to be exact for 10 PPM) and stirred
• Math was required to determine the chlorine (or bromine) concentration.
• Sensitivity was no better then 0.2 or 0.5 PPM for chlorine and for bromine it dropped to 0.5 or 1.25 PPM.
• The drop test was especially deficient since the lowest level of Combined Chlorine you can detect was 0.2 PPM and this was the Health Department's official regulation at which point pools should be shut down for shocking. (maybe that is why public pools in general are kept at a chlorine level of 4 PPM and higher-to keep shock issues at a minimum)
• FAS liquid reagents often were unreliable due to short shelf life and sensitivity to summer heat and the DPD powder or liquid reagents were also problematic.
• Additions of powder DPD are cumbersome with the small cup.

All the complaints are magically gone with the simple, quick and patented EZ-3™ procedure in the eXact® Micro 10 for Free Chlorine and Combined Chlorine

• The drop counting is replaced with the 20 second back and forth dipping of the DPD strip
• No math and the meter stores the values in memory automatically
• Sensitivity is 0.01 for Free Chlorine and Combined Chlorine and the meter range is 11.0 PPM
• Meets all Health Department requirements for testing
• Reagents are precisely measured and impregnated on a test strip pad
• Stabile reagents even when exposed to summer heat
• Simple EZ-3™ step procedure

486699-K eXact Micro 10 Photometer Standard Kit by ITS

The eXact® Micro 10 is the first meter to directly read Combined Chlorine with 0.01 precision and no math required!

Industrial Test Systems, Inc. (ITS) introduces a new photometer using a patented method and technologies that offer faster, safer, easier, and more precise water testing. The eXact® Micro 10 offers ten modes that provides direct read capabilities for Combined Chlorine, Free Chlorine, Total Chlorine, Cyanuric Acid, Copper,Bromine, Total Alkalinity, Ozone, Calcium Hardness, Phosphate, pH and Chloride/Salt.

Highlights:

• Over 10 Direct read parameters (Combined Chlorine, Free Chlorine, Total Chlorine, Cyanuric Acid, Copper,Bromine, Total Alkalinity, Ozone, Calcium Hardness, Phosphate, pH and Chloride/Salt).
• First meter to directly read Combined Chlorine with 0.01 Precision and no math required! (Patented for use in accordance with U.S. Patents Numbers 7333194)
• Built-in, permanent cell (no loose glass or plastic cells; simply fill or dip into water)
• Automatic countdown timer
• 160 test memory (saves last 20 tests per menu)
• Incorporates EZ-3 Testing Method using the eXact® Strip technology (3-steps in under 30 seconds using safe and reliable reagent dispersion)
• No-slip grip housing
• Lightweight (weighs only 6 oz with batteries installed)
• Waterproof meter (IP-67) & floats
• Easy-to-read LCD display
• Environmentally friendly (recyclable parts & uses 60% less reagents than 10mL sample tests)
• No color matching
• Proprietary optics (allow for accurate testing without cap, though available)
• CE certification
• 2 - year Warranty with satisfaction guarantee

The eXact® Micro 10 is EPA-compliant for Free and Total Chlorine regulatory testing. It's ideal for residential, commercial, and municipal testing. With a 4 mL sample cell it's environmental friendly using less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution.

Kit includes:

• eXact Micro 10 Photometer
• 1 eXact® Micro 10 Photometer (486699)
• 1 eXact® Strip Micro DPD-1 (486637-25)Free Chlorine
• 1 eXact® Strip Micro DPD-3 (486638-25)Combined Chlorine
• 1 eXact® Strip Micro PO4 (486814)Phosphate
• 1 eXact® Strip Micro pH (486639-25)
• 1 eXact® Strip Micro CH (481657)Chloride
• 1 eXact® Strip Micro AL (486641-25)Total Alkalinity
• 1 eXact® Reagent CY (481652)Cyanuric Acid
• 1 eXact® Strip Micro CA (486629-25)Calcium Hardness
• 1 eXact® Strip Micro CU (486632-25)Copper
• Mini Dilution Kit (487202)1 Mixing Cap
• 1 Cell Cleaning Brush
• Instruction Booklet
• Plastic Carrying Case (486001)

It's ideal for residential, commercial, and municipal testing. With a 4 mL sample cell it's environmental friendly using less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution.

Why pool professional need the eXact® Micro 10

The FAS-DPD drop test has been a favorite test for many pool service personnel for the last several years for testing pools or spas for Free Chlorine, Total Chlorine, and Bromine (total). This test was adopted by the professionals because you could detect 10 PPM and higher, the test is accepted by Health Departments, and the test does not require for you to distinguish between shades of pink. These benefits drove an almost universal adoption of the FAS-DPD test.

But the professionals had plenty to complain about the short comings of their FAS-DPD drop test kits:

• The titration for 10 PPM chlorine required a lot of drops to be counted ( 50 to be exact for 10 PPM) and stirred
• Math was required to determine the chlorine (or bromine) concentration.
• Sensitivity was no better then 0.2 or 0.5 PPM for chlorine and for bromine it dropped to 0.5 or 1.25 PPM.
• The drop test was especially deficient since the lowest level of Combined Chlorine you can detect was 0.2 PPM and this was the Health Department's official regulation at which point pools should be shut down for shocking. (maybe that is why public pools in general are kept at a chlorine level of 4 PPM and higher-to keep shock issues at a minimum)
• FAS liquid reagents often were unreliable due to short shelf life and sensitivity to summer heat and the DPD powder or liquid reagents were also problematic.
• Additions of powder DPD are cumbersome with the small cup.

All the complaints are magically gone with the simple, quick and patented EZ-3™ procedure in the eXact® Micro 10 for Free Chlorine and Combined Chlorine.

• The drop counting is replaced with the 20 second back and forth dipping of the DPD strip
• No math and the meter stores the values in memory automatically
• Sensitivity is 0.01 for Free Chlorine and Combined Chlorine and the meter range is 11.0 PPM
• Meets all Health Department requirements for testing
• Reagents are precisely measured and impregnated on a test strip pad
• Stabile reagents even when exposed to summer heat
• Simple EZ-3™ step procedure

486699-KS eXact Micro 10 Photometer Starter Kit by ITS

The eXact® Micro 10 is the first meter to directly read Combined Chlorine with 0.01 precision and no math required!

Industrial Test Systems, Inc. (ITS) introduces a new photometer using a patented method and technologies that offer faster, safer, easier, and more precise water testing. The eXact® Micro 10 offers ten modes that provides direct read capabilities for Combined Chlorine, Free Chlorine, Total Chlorine, Cyanuric Acid, Copper,Bromine, Total Alkalinity, Ozone, Calcium Hardness, Phosphate, pH and Chloride/Salt.

Highlights:

• Over 10 Direct read parameters (Combined Chlorine, Free Chlorine, Total Chlorine, Cyanuric Acid, Copper,Bromine, Total Alkalinity, Ozone, Calcium Hardness, Phosphate, pH and Chloride/Salt).
• First meter to directly read Combined Chlorine with 0.01 Precision and no math required! (Patented for use in accordance with U.S. Patents Numbers 7333194)
• Built-in, permanent cell (no loose glass or plastic cells; simply fill or dip into water)
• Automatic countdown timer
• 160 test memory (saves last 20 tests per menu)
• Incorporates EZ-3 Testing Method using the eXact® Strip technology (3-steps in under 30 seconds using safe and reliable reagent dispersion)
• No-slip grip housing
• Lightweight (weighs only 6 oz with batteries installed)
• Waterproof meter (IP-67) & floats
• Easy-to-read LCD display
• Environmentally friendly (recyclable parts & uses 60% less reagents than 10mL sample tests)
• No color matching
• Proprietary optics (allow for accurate testing without cap, though available)
• CE certification
• 2 - year Warranty with satisfaction guarantee

The eXact® Micro 10 is EPA-compliant for Free and Total Chlorine regulatory testing. It's ideal for residential, commercial, and municipal testing. With a 4 mL sample cell it's environmental friendly using less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution.

Kit includes:

• eXact Micro 10 Photometer
• 1 eXact® Micro 10 Photometer (486699)
• 1 eXact® Strip Micro DPD-1 (486637-25) Free Chlorine
• 1 eXact® Strip Micro DPD-3 (486638-25) Combined Chlorine
• 1 eXact® Strip Micro pH (486639-25)
• 1 eXact® Strip Micro AL (486641-25) Total Alkalinity
• 1 eXact® Strip Micro CY (481652) Cyanuric Acid
• 1 Mixing Caps
• 1 Cell Cleaning Brush
• Instruction Booklet
• Plastic Carrying Case (486001)

It's ideal for residential, commercial, and municipal testing. With a 4 mL sample cell it's environmental friendly using less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution.

Why pool professional need the eXact® Micro 10

The FAS-DPD drop test has been a favorite test for many pool service personnel for the last several years for testing pools or spas for Free Chlorine, Total Chlorine, and Bromine (total). This test was adopted by the professionals because you could detect 10 PPM and higher, the test is accepted by Health Departments, and the test does not require for you to distinguish between shades of pink. These benefits drove an almost universal adoption of the FAS-DPD test.

But the professionals had plenty to complain about the short comings of their FAS-DPD drop test kits:

• The titration for 10 PPM chlorine required a lot of drops to be counted ( 50 to be exact for 10 PPM) and stirred
• Math was required to determine the chlorine (or bromine) concentration.
• Sensitivity was no better then 0.2 or 0.5 PPM for chlorine and for bromine it dropped to 0.5 or 1.25 PPM.
• The drop test was especially deficient since the lowest level of Combined Chlorine you can detect was 0.2 PPM and this was the Health Department's official regulation at which point pools should be shut down for shocking. (maybe that is why public pools in general are kept at a chlorine level of 4 PPM and higher-to keep shock issues at a minimum)
• FAS liquid reagents often were unreliable due to short shelf life and sensitivity to summer heat and the DPD powder or liquid reagents were also problematic.
• Additions of powder DPD are cumbersome with the small cup.

All the complaints are magically gone with the simple, quick and patented EZ-3™ procedure in the eXact® Micro 10 for Free Chlorine and Combined Chlorine

• The drop counting is replaced with the 20 second back and forth dipping of the DPD strip
• No math and the meter stores the values in memory automatically
• Sensitivity is 0.01 for Free Chlorine and Combined Chlorine and the meter range is 11.0 PPM
• Meets all Health Department requirements for testing
• Reagents are precisely measured and impregnated on a test strip pad
• Stabile reagents even when exposed to summer heat
• Simple EZ-3™ step procedure