- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna Digital Refractometer for Propylene Glycol Analysis - HI96832
Item #:
HI96832
Brand:
Hanna Instruments
Share this product:
HI96832 Digital Refractometer for Propylene Glycol Analysis by Hanna Instruments
The HI 96832 Propylene Glycol Digital Refractometer is a rugged, portable, water resistant device that utilizes the measurement of refractive index to determine the percent volume and freezing point of propylene glycol based solutions.
This digital refractometer eliminates the uncertainty associated with mechanical refractometers. HI 96832 samples are measured after a simple user calibration with distilled or deionized water. Within seconds, the refractive index and temperature are measured and converted into one of two measurement units; % volume or freezing point. This meter uses internationally recognized references for unit conversion and temperature compensation for glycol solutions (e.g. CRC Handbook of Chemistry and Physics, 87th Edition).
- The dual-level LCD displays measurement and temperature readings simultaneously
- Automatic Temperature Compensation for accurate measurements
- Easy measurement; place a few drops of the sample in the well and press the READ key
- BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings.
- IP65 water protection; built to perform under harsh laboratory and field conditions.
- Quick, accurate results, readings are displayed in approximately 1.5 seconds.
- Single point calibration with distilled or deionized water
- Small sample size, can be as small as 2 metric drops.
- Automatic shut-off after three minutes of non-use
- Stainless steel sample well, easy to clean and corrosion resistant
- ABS thermoplastic casing
Order Information:
HI 96832 is supplied with battery and instruction manual.
% Volume Range | 0 to 100 % |
Freezing Point Range | 0 to -51 °C (32 to -59.8 °F) |
Temperature Range | 0 to 80 °C (32 to 176 °F) |
% Volume Resolution | 0.1 % |
Freezing Point Resolution | 0.1 °C (0.1 °F) |
Temperature Resolution | 0.1 °C (0.1 °F) |
% Volume Accuracy (@20°C) | ±0.2 % |
Freezing Point Accuracy (@20°C) | ±0.5 °C (±1.0 °F) |
Temperature Accuracy (@20°C) | ±0.3 °C (±0.5 °F) |
Temperature Compensation | automatic between 10 and 40°C (50 to 104°F) |
Measurement Time | approximately 1.5 seconds |
Minimum Sample Volume | 100 µL (to cover prism totally) |
Light Source | yellow LED |
Sample Cell | stainless steel ring and flint glass prism |
Auto-off | after three minutes of non-use |
Enclosure Rating | IP 65 |
Battery Type / Battery Life | 9V / approximately 5000 readings |
Dimensions | 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”) |
Weight | 420 g (14.8 oz.) |