- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna Copper, Low Range, Portable Photometer - HI96747
Item #:
HI96747
Brand:
Hanna Instruments
Share this product:
HI96747 Copper, Low Range, Portable Photometer by Hanna Instruments
HI 96747 is a auto-diagnostic photometer engineered to measure a wide range of copper concentrations. Due to the specially formulated powder reagent with long-term stability, copper analysis is possible even where iron and calcium is present. This photometer does not work in saltwater.
Both meters use an exclusive positive-locking system to ensure that the cuvette is in the same position every time it is placed into the measurement cell. It is designed to fit a cuvette with a larger neck making it easier to add both sample and reagents. The cuvette is made from special optical glass to obtain best results.
- CAL CHECK™
- User calibration
- Certified calibration and verification standards
- BEPS (Battery Error Prevention System)
- TIMER function
- Auto shut-off
- GLP Features
Order Information:
HI 96747 is supplied with sample cuvettes with caps (2), 9V battery and instruction manual.
HI 96747C includes sample cuvettes with caps (2 ea.), 9V battery, scissors, cloth for wiping cuvettes, instrument quality certificate, instruction manual and rigid carrying case.
Range | 0.000 to 1.500 mg/L |
Resolution | 0.001 mg/L for measurement; 0.01 mg/L for calibration and validation |
Accuracy | ±0.010 mg/L ±5% of reading @ 25°C |
Light Source | tungsten lamp |
Light Detector | silicon photocell with narrow band interference filter @ 560 nm |
Environment | 0 to 50°C (32 to 122°F); Max 95% RH non-condensing |
Power Supply | 9V battery |
Auto Shut-off | after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder |
Dimensions | 192 x 104 x 69 mm (7.6 x 4.1 x 2.7") |
Weight | 360 g (12.7 oz.) |
Method | adaptation of the USEPA approved bicinchoninate method |