- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech VT30 LCD Multifunction Voltage Tester
Item #:
EXT-VT30
Brand:
Extech
Share this product:
VT30 LCD Multifunction Voltage Tester by Extech
Features
- Large backlit LCD display
- LCD AC/DC voltage indication: 6V, 12V, 24V, 50V, 230V, 400V, 690V
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Rubberized double-molded IP64 housing
- EN61010-1 CAT IV 600V and CAT III 600V safety rating
- Dimensions: 9.4x3x1.6" (240x78x40mm); Weight: 8.4oz (237g)
- Complete with 2 AAA batteries, protective cap, and pouch case
LCD display | 1999 counts (3-1/2 digits) with bargraph and backlight |
Resolution | 1 Volt |
AC Voltage range | 0 to 480V |
ACV frequency range | 50/60Hz |
DC Voltage range | 0 to 690V |
Accuracy | ACV ±(1.5%rdg + 5d); DCV ±(1.0%rdg + 3d) |
Range selection | Automatic |
Max measuring current | ≤1.0mA (400VAC); ≤1.5mA (690VDC) |
Response time | Updates 2-3 times/sec |
Input Impedance | 1MΩ (approx) |
Continuity test | Range 0 to 200kΩ, guaranteed on < 50kΩ; <5µA test current |
Overvoltage protection | 480VAC/690VDC |
Low impedance test | 12-250VAC/DC; impedance <6kΩ; |
LCD enable input voltage | >4.5V AC/DC |
Operation time | 5s<250V AC/DC |
Power supply | 2 x "AAA" 1.5V alkaline batteries |
Battery life | Approx. 8 hours continuous use typical |
Operating Temperature | 14 to 131°F (-10 to 55°C) |
Storage Temperature | -22 to 140°F (-30 to 60°C) |
Operating Humidity | 10 to 85% RH (non-condensing) |
Safety | This meter is intended for origin of installation use and protected, against the users, by double insulation per EN61243-3 and EN61010-1 to Category IV 600V and Category III 600V; Pollution Degree 2. |
Approvals | CE, IP64 |
Dimensions | 9.4 x 3 x 1.6"(240 x 78 x 40mm) |
Weight | 9.2oz (260G) |