- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech RT30 Wireless AC Circuit Identifier (914MHz) with External Probe
Item #:
EXT-RT30
Brand:
Extech
Share this product:
RT30 Wireless AC Circuit Identifier (914MHz) with External Probe by Extech
Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology. It enables a single user to identify mid-run wires and to find the breaker that powers a circuit or light fixture without having to connect directly to the wires in the cable.
Features
- Simplify mid-run wiring jobs by easily identifying the correct circuit powering the cable to be spliced or repaired
- The innovative RT30 combines non-contact voltage detection with wireless signals to monitor and remotely report the presence of voltage on a wire
- Clamped onto a live wire, the transmitter signals the user at the breaker panel with LED and audible alerts on the receiver (up to 100m range). The alerts stop when the correct circuit breaker is switched and work can then be performed safely.
- Eliminates the need for an assistant or back-and-forth trips to confirm the correct circuit is powered down
- The RT30's clamp-style probe accessory is ideal for wires that are hard to isolate or reach
- Plus, easily identify lighting and outlet circuits with the built-in light sensor
- Includes transmitter, receiver, remote clamp-style probe, four "AAA" batteries, and pouch case
The RT30/RT32 Wireless AC Circuit Identifier is a convenient, must-have tool for
- Electricians
- Plumbers
- General contractors
- Do-it-yourselfers
- Kitchen and bath remodelers
- Lighting installers
- Handymen
- Anyone who needs a virtual electrician's helper
Easy to Use
- Clamp the transmitter directly onto installed wiring to detect voltage.
- The receiver alerts the user at the breaker panel with a voltage-present LED indicator and audible beep.
- Alerts cease when the right circuit breaker is switched off or a junction splice is opened in the circuit.
Transmitter Unit |
Receiver Unit |
|
Indicators |
LED |
Audio Beeper, LED |
Transmission Frequency |
RT30 (914MHz) |
n/a |
Transmission Distance |
Approx. 100m (328') in an unobstructed field |
|
Transmission Power |
+10dBm |
n/a |
Alarm Status |
Visual |
Visual and audible |
Power Supply |
Two (2) 'AAA' batteries |
Two (2) 'AAA' batteries |
Battery Life |
80 hours (approximately) |
|
Operating Temperature |
-10 to 50°C (14 to 122°F) |
|
Storage Temperature |
-30 to 60°C (-14 to 140°F) |
|
Operating Humidity |
90% RH from -10 to 30°C (32-86°F) 75% RH from 30 to 40°C (86-104°F) 45% RH from 40 to 50°C (104-122°F) |
|
Storage Humidity |
90% RH max. |
|
Dimensions |
101x61x38mm (4.0x2.4x1.5") |
114x30x26mm
(4.5x1.17x 1.02") |
Weight |
0.23 kg (8.0 oz) – three (3) piece total |