Extech MA1500 1500A True RMS AC/DC Clamp Meter + NCV with NIST

Item #:

EXT-MA1500-NIST

Brand:

Extech

Our tech experts are ready to help!

Share this product:

MA1500 1500A True RMS AC/DC Clamp Meter + NCV with NIST by Extech

True RMS for accurate readings of non-sinusoidal waveforms
Built-in non-contact Voltage detector with LED alert
2.0" (52mm) jaw size for conductors up to 500MCM
Dual 40,000/4000 count, backlit LCD display
Includes Multimeter functions
Inrush function captures transients during motor startups
Relative Mode for Capacitance Zero and Offset Adjustment
Data Hold, Peak Hold, MIN/MAX, and Auto Power Off
Complete with test leads, general purpose Type K bead wire temperature probe, 9V battery and carrying case

General Specifications

Clamp jaw opening	52mm (2.0") approx.
Display	Dual 40,000/4,000 count backlit LCD
Continuity check	Threshold 25 to 60Ω; Test current < 0.5mA
Diode test	Test current of 0.3mA typical; Open circuit voltage 2.8VDC typical
Low Battery indication	Battery symbol is displayed
Over-range indication	'OL' display
Measurement rate	2 readings per second, nominal
Peak detector	>1ms
Thermocouple sensor	Type K thermocouple required
Input Impedance	10MΩ (VDC and VAC)
AC bandwidth	50 to 400Hz (AAC and VAC)
AC response	True rms (AAC and VAC)
Crest Factor	3.0 in 40A and 400A ranges, 1.4 in 1000A range (50/60Hz and 5% to 100% of range)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Operating Humidity	Max 80% up to 31°C (87°F) decreasing linearly to 50% at 40°C (104°F)
Storage Humidity	<80%
Operating Altitude	2000meters (7000ft) maximum.
Battery	One (1) 9V Battery (NEDA 1604)
Auto power OFF	After approx. 30 minutes
Dimensions & Weight	294x105x47mm (11.57x4.13x1.85"); 536g (18.9 oz)
Safety	For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (2001): EN61010-1 (2001) Overvoltage Category IV 600V and Category III 1000V, Pollution Degree 2.
Approvals	CE

Range Specifications

Function	Range& Resolution	Accuracy (% of reading)
DC Current	400.00 ADC	± (2.0% +30digits)
DC Current	1500.0 ADC	± (2.5% +30digits)
AC Current True RMS (50Hz to 60 Hz)	400.00 AAC	± (2.8% +30digits)
	1500.0 AAC	± (2.8% +30digits)
	All AC current ranges are specified from 5% to 100% of range
DC Voltage	400.00 mVDC	± (0.1% + 5 digits)
	4.0000 VDC	± (0.1% + 4 digits)
	40.000 VDC
	400. 00 VDC
	1000.0 VDC	± (0.5% + 4 digits)
AC Voltage True RMS (50 Hz to 1000 Hz)	400.00 mVAC	± (0.8% + 40 digits)(50/60Hz)
	4.0000 VAC	± (1.0% + 30 digits)
	40.000 VAC
	400. 00 VAC
	750.0 VAC
	All AC voltage ranges are specified from 5% to 100% of range
Resistance	400.00 Ω	± (0.5% + 9 digits)
	4.0000 kΩ	± (1.0% + 4 digits)
	40.000 kΩ
	400.00 kΩ
	4.0000 MΩ	± (2.0% + 10 digits)
	40.000 MΩ	± (3.0% + 10 digits)
Capacitance	400.00 nF	±(3.5% reading + 40 digits)
	4000.0 nF	±(3.5% reading + 10 digits)
	40.00.μF
	400.0.μF
	4.000 mF	±(5% reading + 10 digits)
	20.00 mF	±(5% reading + 10 digits)
	40.00 mF	Not specified
Frequency	40.000 Hz	±(0.3% reading + 2 digits)
	400.00 Hz
	4.0000 kHz
	40.000 kHz
	400.00 kHz
	4.0000MHz
	40.000MHz
	Sensitivity: 0.8V rms min. @ 20% to 80% duty cycle and <100kHz; 5Vrms min @ 20% to 80% duty cycle and > 100kHz.
Duty Cycle	10.0 to 95.0%	± (1.0% reading + 2 digits)
Duty Cycle	Pulse width: 100µs - 100ms, Frequency: 10Hz to 100kHz
Temp (type-K)	-100.0 to 1000.0°C	±(1.0% reading + 2.5 °C)
	-148.0 to 1832.0°F	±(1.0% reading + 4.5°F)
	probe accuracy not included)

$319.99