- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech CA250 400A AC/DC Clamp-on Adaptor + NCV
Item #:
EXT-CA250
Brand:
Extech
Share this product:
CA250 400A AC/DC Clamp-on Adaptor + NCV by Extech
Features
- Fits virtually any MultiMeter with standard shrouded banana plug sockets
- Built-in non-contact voltage detector with LED alert
- 1.2" (30mm) clamp jaw
- Measures AC/DC Current in two ranges: 0 to 40A (10mV per Amp output) and; 0 to 400A (1mV per Amp output)
- ±2.5% basic accuracy
- DC zero adjust
- Dims: 5.8 x 2.3 x 1.3" (146 x 60 x 32mm) Weight: 8oz (226g)
- Complete with built-in 3.8ft (1.1m) cable with banana plugs and two AAA batteries
Measurement Ranges | 0 to 40 Amps AC/DC 0 to 400 Amps AC/DC |
Adaptor Output | 10mV/Amp on the 0 to 40A range 1mV/Amp on the 0 to 400A range |
Frequency range | 50/60Hz |
Safety | EN61010-1 and IEC61010-1 2nd Edition (2001) to Category III 600V and Category IV 300V; Pollution Degree 2 in accordance with IEC 664 indoor use. |
Accuracy | 0 to 40A ± (2.5% + 0.1A) 0 to 400A ± (2.8% + 0.5A) |
Jaw size | 30mm (1.2") |
Operating Conditions | 0 to 50°C (32 to 122°F) < 70% RH |
Storage Conditions | -20 to 70°C (-4 to 158°F) < 80% RH |
Battery | 2 – 1.5V "AAA" |
Dimensions/Weight | 146 x 60 x 32mm (5.8 x 2.3 x 1.3"); 226g (8oz) |