- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech 475055 High Capacity Force Gauge with PC Interface with NIST
Item #:
EXT-475055-NIST
Brand:
Extech
Share this product:
475055 High Capacity Force Gauge with PC Interface with NIST by Extech
Features
- Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton
- Basic accuracy of 0.5%
- Tension or Compression, Peak hold and Zero functions
- Positive/Reverse display for easy readability
- Large LCD with back light feature
- RS-232 PC interface
- Optional software available (407001)
- Complete with tension and compression adaptors, six AA 1.5V batteries, and case
Range | 220 lbs, 100kg, 980 Newtons |
Accuracy (23°C) | ±(0.5%rdg + 0.1lbs, 0.1kg or 0.4N) |
Resolution | 0.05lbs, 0.05kg, 0.2 Newtons |
Overload Capacity | 150kg |
Circuit | Custom LSI microprocessor |
Zero adjust | Button for Peak Hold and normal display zero |
Display | 5 digit LCD type; Digit height: 0.63” (16 mm) |
Update Rate | Fast mode 0.2 seconds; Slow mode 0.6 seconds |
Over range Indicators | LCD displays "------" for tension measurements and "------" for compression measurements |
Zero / Tare Control | Up to Maximum capacity |
Full Scale Deflection | <1mm |
Transducer type | S-type load cell with 2 hooks (thread size: M6 x 1mm ISO) and 6.5 ft (2m) cable |
Peak Hold | Freezes Max reading on display |
Data Output | RS-232 serial interface with 16-bit data stream output |
Operating Temperature | 32 °F to 122 °F (0°C to 50°C) |
Operating RH | Max. 80% Relative Humidity (RH) |
Power Supply | 6 x 1.5V 'AA' batteries or 9VDC adapter (not included) |
Power consumption | 28mA (approx.) |
Weight | Meter: 1 lb (450g) |
Sensor: 0.84 lbs (380g) | |
Dimensions | Meter: 8.5 x 3.5 x 1.8" (215 x 90 x 45 mm) |
Sensor with 2 hooks: 5.7 x 2.0 x 0.6" (145 x 51 x 15 mm) | |
Cable length: 6.5 ft. (2m) | |
Test Stand Mounting Holes | Located on rear (thread size: M5 x 0.8mm ISO); mounting screws included. Holes are 60mm apart |