- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech SDL800 Vibration Meter/Datalogger
Item #:
EXT-SDL800
Brand:
Extech
Share this product:
SDL800 Vibration Meter/Datalogger by Extech
Features
- Remote vibration sensor with magnetic adapter on 47.2"(1.2m) cable
- Wide frequency range of 10Hz to 1kHz
- Basic accuracy of ±(5% + 2 digits); Meets ISO2954
- RMS, Peak Value or Max Hold measurement modes
- Adjustable data sampling rate: 1 to 3600 seconds
- Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC
- Offset adjustment used for zero function to make relative measurements
- Large backlit LCD
- Stores 99 readings manually and 20M readings via 2G SD card
- Record/Recall MIN, MAX readings
- Data Hold plus Auto power off with disable function
- Built-in PC interface
- Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case
Display | Backlit LCD; LCD size: 52 x 38mm (2 x 1.5") |
Status indicators | Over-range audible beep and low battery display (battery) icon |
Frequency Range | 10Hz to 1kHz |
Datalogger Sampling Rate | AUTO LOGGING: From 1 to 3600 seconds. MANUAL LOGGING: Set the sampling rate to ‘0’ seconds |
Memory Card | SD memory card; 1G to 16GB size |
Data Hold | Freeze the displayed reading |
Memory Recall | Record and Recall the Maximum and Minimum readings |
Display update rate | Approx. 1 second |
Data Output | RS-232 / USB PC computer interface |
Operating Temperature | 0 to 50°C (32 to 122°F) |
Operating Humidity | 85% R.H. max. |
Auto Power OFF | After 10 minutes of inactivity (can be disabled) |
Power Supply | Six (6) 1.5 VDC batteries (optional 9V AC adaptor) |
Power Consumption | Normal operation (backlight and datalogger OFF): approx. 5mAdc With backlight OFF and datalogging ON: approx. 25mAdc With backlight ON add approx. 12mAdc |
Weight | 343g (0.75 lbs.) w/ batteries; 241g (0.53 lbs.) w/o batteries |
Dimensions | Meter: 182 x 73 x 47.5mm (7.1 x 2.9 x 1.9") Vibration sensor: round 16mm (0.63") diameter, 37mm (1.46") length |
Function |
Unit |
Range and Resolution |
Accuracy |
Acceleration |
m/s2 |
0.5 to 199.9 m/s2 |
± ( 5%rdg + 2 d ) @ 80 and 160Hz |
g |
0.05 to 20.39 G |
||
ft/s2 |
2 to 656 ft/s2 |
||
Calibration Point: 50 m/S^2 ( 160 Hz ) |
|||
Velocity |
mm/s |
0.5 to 199.9 mm/s |
± ( 5%rdg + 2 d ) @ 80 and 160Hz |
cm/s |
0.05 to 19.99 cm/s |
||
inch/s |
0.02 to 7.87 inch/s |
||
Calibration Point: 50 mm/s ( 160 Hz ) |
|||
Displacement |
mm |
1.999 mm |
± ( 5%rdg + 2 d )@ 80 and 160Hz |
inch |
0.078 inch |
||
Calibration Point: 0.141 mm ( 160 Hz ) |