- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech 380926 2000A True RMS AC/DC Clamp Meter
Item #:
EXT-380926
Brand:
Extech
Share this product:
380926 2000A True RMS AC/DC Clamp Meter by Extech
Features
- Full function autoranging DMM includes AC/DC Voltage and Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode and Continuity
- Current measurements to 2000A through the clamp and 400mA via test leads
- Large 4000 count backlit display for high resolution and easy viewing in dimly lit areas
- Basic DCV accuracy of 1% with 0.1mV resolution and current resolution to 0.1μA
- Rugged 2" (50mm) jaws accomodate one 2000MCM or two 500MCM cables
- Features include DCA push button zero, Relative measurements and Data Hold
- Heavy duty ABS case with built-in stand and thumb control function switch
- Complete with test leads and 9V battery
Conductor Size | 2.0”(50mm) maximum |
Measurement parameters | ACA, DCA, ACV, DCV, Resistance, Diode, Frequency, Capacitance, Duty Cycle, Continuity |
Current Sensor | Hall Effect |
Zero adjust | Automatic except for DCA (Push-button) |
Diode Test | Test current of 0.6mA typical; Open circuit voltage <1.6V DC typical |
Battery type | 9V NEDA 1604 |
Range Selection | Auto or manual |
Display | 0.6" (15mm) 5000 Count Backlit LCD |
Overload Indication | "OL" |
Power Consumption | 5mA approx |
Low Battery Indication | Battery icon appears on LCD |
Sampling rate | 1 reading every 0.35 seconds approx. |
Standards | CE, IEC 1010-1 CAT III 1000V and CAT IV 600V |
Operating Temperature/Humidity | 32 to 122°F (0°C to 50°C) / <80% |
Dimensions | 10 x 2.9 x 1.5" (255 x 73 x 38mm) |
Weight | 0.85 lbs. (380g) |
Function | Maximum Rated Input Limits |
AC/DC Current | 500mA AC/DC (fused) |
AC Voltage | 1000 VAC/DC |
DC Voltage | 1000 VAC/DC |
Resistance | 400 VAC/DC |
Frequency | 1000 VAC/DC |
Capacitance | 400 VAC/DC |
Duty Cycle | 1000 VAC/DC |
Diode Test | 400 VAC/DC |
Function | Range | Resolution | Accuracy | Remarks |
AC/DC Current (Clamp on) | 400.0A | 0.1A | ±(2.0% + 5d) | 45Hz to 1KHz |
2000A | 1A | ±(2.0% + 8d) | ||
AC Voltage True RMS | 4.000V | 1mV | ±(1.2% + 5d) | 45Hz to 1KHz Input Impedance: 10Mohms |
40.00V | 10mV | |||
400.0V | 0.1V | |||
1000V | 1V | |||
DC Voltage | 400.0mV | 0.1mV | ±(0.5% + 2d) | Input Impedance: 10Mohms |
4.000V | 1mV | ±(1.0% + 2d) | ||
40.00V | 10mV | |||
400.0V | 0.1V | |||
1000V | 1V | |||
Resistance | 400.0 Ω | 0.1Ω | ±(1.0% + 5d) | |
4.000 kΩ | 1Ω | |||
40.00 kΩ | 10Ω | |||
400.0 kΩ | 100Ω | |||
4.000 MΩ | 1kΩ | ±(2.0% + 2d) | ||
40.00 MΩ | 10kΩ | ±(3.5% + 5d) | ||
AC/DC Current (Direct Input) | 400.0µA | 0.1µA | ±(1.2% + 5d) | 45Hz to 1KHz |
4000µA | 1µA | |||
40.00mA | 0.01mA | |||
400.0mA | 0.1mA | |||
Frequency | 5Hz | 0.001Hz | ±(1% + 5d | |
50Hz | 0.01Hz | |||
500Hz | 0.1Hz | |||
5kHz | 1Hz | |||
50kHz | 10Hz | |||
100kHz | 100Hz | |||
Capacitance | 50nF | 10pF | ±(3% + 5d) | Accuracy stated after a relative "REL" zero performed |
500nF | 100pF | |||
5µF | 0.001µF | |||
50µF | 0.01µF | |||
Duty Cycle | 1 to 99% | 0.1% | ±(1% + 5d) | |
Continuity | Audible tone; <10 ohms approximately Open circuit voltage; 0.5V approximately |