Temperature Controllers

WD-36225-59 Variable-Voltage Output Controller; 5-100%, 120V/10A by Digi-Sense

This control is designed to regulate the input voltage through the selector knob on the unit. To operate plug a resistive load into the receptacle on the back of the unit, and adjust the control dial to the desired level. The higher the selected number on the dial, the higher the voltage and hotter the load will get. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Designed to regulate the input voltage through the selector knob

Includes

6' attached power cord

WD-36225-61 Benchtop 1-Zone Temperature Controller; Type J, 120V/15A by Digi-Sense

These temperature controllers display both the setpoint and process temperature and features modern control technology that produces greater temperature stability. The Auto-tune feature minimizes setpoint overshoot and features the ability to learn your process producing greater stability. Changing your setpoint is easily done with the interface keys. The controller can also perform ramp rate operations to allow the user to slowly raise the process temperature. The controller also features an audible alarm output, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and a lattice support bracket

WD-36225-62 1-Zone Temperature Controller; Type K, 120V/15A by Digi-Sense

These temperature controllers display both the setpoint and process temperature and features modern control technology that produces greater temperature stability. The Auto-tune feature minimizes setpoint overshoot and features the ability to learn your process producing greater stability. Changing your setpoint is easily done with the interface keys. The controller can also perform ramp rate operations to allow the user to slowly raise the process temperature. The controller also features an audible alarm output, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and a lattice support bracket

WD-36225-63 1-Zone Temperature Controller; Type T, 120V/15A by Digi-Sense

These temperature controllers display both the setpoint and process temperature and features modern control technology that produces greater temperature stability. The Auto-tune feature minimizes setpoint overshoot and features the ability to learn your process producing greater stability. Changing your setpoint is easily done with the interface keys. The controller can also perform ramp rate operations to allow the user to slowly raise the process temperature. The controller also features an audible alarm output, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and a lattice support bracket

WD-36225-64 Benchtop 1-Zone Temperature Controller; RTD, 120V/15A by Digi-Sense

These temperature controllers display both the setpoint and process temperature and features modern control technology that produces greater temperature stability. The Auto-tune feature minimizes setpoint overshoot and features the ability to learn your process producing greater stability. Changing your setpoint is easily done with the interface keys. The controller can also perform ramp rate operations to allow the user to slowly raise the process temperature. The controller also features an audible alarm output, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and a lattice support bracket

WD-36225-66 1-Zone Temperature Controller; Ramp/Soak, Type J, 120V/12A by Digi-Sense

These controllers are designed for controlling multiple steps in a predetermined temperature processes, and features modern control technology that produces greater temperature stability. The Ramp/Soak feature of this control allows up to a 40-step profile, which can be configured from the provided software. You can profile temperature, time, hold, soak and end steps to create the ideal profile for your process. Auto-tune minimizes setpoint overshoot and features the ability to learn your process producing greater stability. The built in adaptive control technology provides even tighter control for these demanding applications. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Software allows for data point collection and custom designed interface
• Program up to a 40-step profile

Includes

Software, 6' detachable power cord and a lattice support bracket

WD-36225-67 1-Zone Temperature Controller; Ramp/Soak, Type K, 120V/12A by Digi-Sense

These controllers are designed for controlling multiple steps in a predetermined temperature processes, and features modern control technology that produces greater temperature stability. The Ramp/Soak feature of this control allows up to a 40-step profile, which can be configured from the provided software. You can profile temperature, time, hold, soak and end steps to create the ideal profile for your process. Auto-tune minimizes setpoint overshoot and features the ability to learn your process producing greater stability. The built in adaptive control technology provides even tighter control for these demanding applications. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Software allows for data point collection and custom designed interface
• Program up to a 40-step profile

Includes

Software, 6' detachable power cord and a lattice support bracket

WD-36225-68 1-Zone Temperature Controller; Ramp/Soak, Type T, 120V/12A by Digi-Sense

These controllers are designed for controlling multiple steps in a predetermined temperature processes, and features modern control technology that produces greater temperature stability. The Ramp/Soak feature of this control allows up to a 40-step profile, which can be configured from the provided software. You can profile temperature, time, hold, soak and end steps to create the ideal profile for your process. Auto-tune minimizes setpoint overshoot and features the ability to learn your process producing greater stability. The built in adaptive control technology provides even tighter control for these demanding applications. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Software allows for data point collection and custom designed interface
• Program up to a 40-step profile

Includes

Software, 6' detachable power cord and a lattice support bracket

WD-36225-69 1-Zone Temperature Controller; Ramp/Soak, RTD, 120V/12A by Digi-Sense

These controllers are designed for controlling multiple steps in a predetermined temperature processes, and features modern control technology that produces greater temperature stability. The Ramp/Soak feature of this control allows up to a 40-step profile, which can be configured from the provided software. You can profile temperature, time, hold, soak and end steps to create the ideal profile for your process. Auto-tune minimizes setpoint overshoot and features the ability to learn your process producing greater stability. The built in adaptive control technology provides even tighter control for these demanding applications. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Software allows for data point collection and custom designed interface
• Program up to a 40-step profile

Includes

Software, 6' detachable power cord and a lattice support bracket

WD-36225-71 2-Zone Temperature Controller; Type J, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-72 2-Zone Temperature Controller; Type K, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-73 2-Zone Temperature Controller; Type T, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-74 2-Zone Temperature Controller; RTD, 120V/15A by Digi-Sense

These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ablity to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes
• Setpoint is easily and securely changed with an interface key

Includes

6' detachable power cord and a lattice support bracket

WD-36225-76 1-Zone Temperature Controller; Limit/Alarm, Type J, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-77 1-Zone Temperature Controller; Limit/Alarm, Type K, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-78 1-Zone Temperature Controller; Limit/Alarm, Type T, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-79 1-Zone Temperature Controller; Limit/Alarm, RTD, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-90 104A PL512 On/Off Temperature Controller, Type J, -328 to 2192°F, 120V by Digi-Sense

This controller is designed to turn the power on and off to the output receptacle based on the set temperature. Equipped with a dial contol that allows you to set and regulate the desired temperature. Features a digital display, selectable temperature scales, and one panel-mointed receptacle. To save bench space, mount the unit to a support pole or lattice

• A basic on/off controller for processes where temperature stability is less critical

WD-36225-91 104A PL312 Variable- Time Output Controller 1440 Watts, 120 V 50/60 Hz by Digi-Sense

This timed control turns the output load on and off and then repeats the cycle. Each position on the knob from LO to HI represents a specific cycle time where the on time ranges from 6 to 100 percent. For example the LO setting represents a total cycle of 60 seconds with an on time of 4 seconds. This type of control can be used to regulate the temperature of resistive loads. The pilot light on the front will glow when the load is on.

• Manually set power control dial from 5 to 100% to control the output wattage

Includes

Model 36225-91 has a 6-ft cord with U.S. plug; model 36225-92 has a 4-ft cord without plug.

WD-89800-01 TC-9000 Thermocouple Temperature Controller, 115V by Digi-Sense

The Digi-Sense temperature controllers can be used for a wide variety of applications. Provides excellent control accuracy and power capabilities, making them ideal for pilot process plants, R & D labs, or for OEM requirements.

Product FeaturesAccepts eight thermocouple types with miniconnectors.

General features - Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error. Simultaneously view both the measured and set point on the two-line alphanumeric display. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). Front panel indicates output and alarm conditions. Multiple control modes from simple On/Off control to sophisticated autotuning PID control.

Safety features - Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemp feature protection shuts down the system if the user- settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.

• Advanced design allows for quicker and more reliable results
• Improved display with easy-to-use interface
• Effective 10/1/2014 this product was rebranded from Oakton to Digi-Sense
• Heater output is a universal IEC 60320 receptacle. Customer will need an adaptor between the IEC receptacle and heat load for their indiviual country

Includes

The 115 VAC models include a 6-ft (1.8-m) power cord with US standard plug; the 230 VAC models feature an IEC cord set with 6-15P plug. Built-in grid support bracket allows the unit to be mounted onto a laboratory frame or grid.

WD-89800-02 TC-9000 Thermocouple Temperature Controller, 230V by Digi-Sense

The Digi-Sense temperature controllers can be used for a wide variety of applications. Provides excellent control accuracy and power capabilities, making them ideal for pilot process plants, R & D labs, or for OEM requirements.

Product FeaturesAccepts eight thermocouple types with miniconnectors.

General features - Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error. Simultaneously view both the measured and set point on the two-line alphanumeric display. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). Front panel indicates output and alarm conditions. Multiple control modes from simple On/Off control to sophisticated autotuning PID control.

Safety features - Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemp feature protection shuts down the system if the user- settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.

• Advanced design allows for quicker and more reliable results
• Improved display with easy-to-use interface
• Effective 10/1/2014 this product was rebranded from Oakton to Digi-Sense
• Heater output is a universal IEC 60320 receptacle. Customer will need an adaptor between the IEC receptacle and heat load for their indiviual country

Includes

The 115 VAC models include a 6-ft (1.8-m) power cord with US standard plug; the 230 VAC models feature an IEC cord set with 6-15P plug. Built-in grid support bracket allows the unit to be mounted onto a laboratory frame or grid.

WD-89800-03 TC-9500 Multiparameter Temperature Controller with USB Output, 115V by Digi-Sense

The Digi-Sense temperature controllers can be used for a wide variety of applications. Provides excellent control accuracy and power capabilities, making them ideal for pilot process plants, R & D labs, or for OEM requirements.

Product FeaturesAccepts eight thermocouple types with miniconnectors.

General features - Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error. Simultaneously view both the measured and set point on the two-line alphanumeric display. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). Front panel indicates output and alarm conditions. Multiple control modes from simple On/Off control to sophisticated autotuning PID control.

Safety features - Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemp feature protection shuts down the system if the user- settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.

The TC-9500 Multiparameter controller accept 8 thermocouple types with mini-connectors, thermistor probes with 1/4" phono plugs, RTD probes with standard 3-pin ANSI connectors, or Oakton®/Digi-Sense® RTD probe connector.

The Temp-9500 also features data logging, ramp-and-soak / ramp-rate profiling for more complicated processes, USB computer interface, alarm relay, and free software that features real-time graphing.

• Advanced design allows for quicker and more reliable results
• Improved display with easy-to-use interface
• Effective 10/1/2014 this product was rebranded from Oakton to Digi-Sense
• Heater output is a universal IEC 60320 receptacle. Customer will need an adaptor between the IEC receptacle and heat load for their indiviual country

Includes

The 115 VAC models include a 6-ft (1.8-m) power cord with US standard plug; the 230 VAC models feature an IEC cord set with 6-15P plug. Built-in grid support bracket allows the unit to be mounted onto a laboratory frame or grid.

WD-89800-04 TC-9500 Multiparameter Temperature Controller with USB Output, 230V by Digi-Sense

The Digi-Sense temperature controllers can be used for a wide variety of applications. Provides excellent control accuracy and power capabilities, making them ideal for pilot process plants, R & D labs, or for OEM requirements.

Product FeaturesAccepts eight thermocouple types with miniconnectors.

General features - Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error. Simultaneously view both the measured and set point on the two-line alphanumeric display. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). Front panel indicates output and alarm conditions. Multiple control modes from simple On/Off control to sophisticated autotuning PID control.

Safety features - Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemp feature protection shuts down the system if the user- settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.

The TC-9500 Multiparameter controller accept 8 thermocouple types with mini-connectors, thermistor probes with 1/4" phono plugs, RTD probes with standard 3-pin ANSI connectors, or Oakton®/Digi-Sense® RTD probe connector.

The Temp-9500 also features data logging, ramp-and-soak / ramp-rate profiling for more complicated processes, USB computer interface, alarm relay, and free software that features real-time graphing.

• Advanced design allows for quicker and more reliable results
• Improved display with easy-to-use interface
• Effective 10/1/2014 this product was rebranded from Oakton to Digi-Sense
• Heater output is a universal IEC 60320 receptacle. Customer will need an adaptor between the IEC receptacle and heat load for their indiviual country

Includes

The 115 VAC models include a 6-ft (1.8-m) power cord with US standard plug; the 230 VAC models feature an IEC cord set with 6-15P plug. Built-in grid support bracket allows the unit to be mounted onto a laboratory frame or grid.

WD-89800-11 TC9100 Benchtop Temperature Controller for Thermocouples; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting

WD-89800-12 TC9100 Benchtop Temperature Controller for Thermocouples; 230 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

Includes

grid support bracket, electrical noise canceling ferrite clip, and IEC socket power connector for interchangeable cord sets (specify country of destination when ordering).

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting

WD-89800-13 TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

The advance controllers also include a USB communication port, audible alarm, external alarm relay output, and a detachable power cord. Free software features real-time graphing, logging of measured temperature and set point temperature, help menu, and ability to interface with other Windows-based programs.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting
• Free software offers remote computer control of system operations
• Program up to nine ramp and soak profiles of up to 16 segments each

WD-89800-14 TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors; 230 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

The advance controllers also include a USB communication port, audible alarm, external alarm relay output, and a detachable power cord. Free software features real-time graphing, logging of measured temperature and set point temperature, help menu, and ability to interface with other Windows-based programs.

Includes

grid support bracket, electrical noise canceling ferrite clip, and IEC socket power connector for interchangeable cord sets (specify country of destination when ordering).

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting
• Free software offers remote computer control of system operations
• Program up to nine ramp and soak profiles of up to 16 segments each

94460-45 Traceable® Temperature Controller with Timer and Calibration by Digi-Sense

Control heating elements, cooling blocks, hot plates, heating mantles, cooling systems, or incubators to ±1°C. Brilliant 1/2" H LCD displays the temperature and time; red LED shows on/off mode. Accuracy is traceable to NIST standards. Battery keeps settings safe from power outage for one year.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Program up to three pairs of on/off switchings per day
• Use manual override without disturbing temperature or time settings

Includes

Relay, 3 1/2 ft relay cable, 3 1/2-ft sensor cable with integral sensor, NIST-traceable calibration certificate with data, and two AAA batteries.