ITS Arsenic Quick II Kit - 481303-5

481303-5 Arsenic Quick II Kit by ITS

Arsenic Quick™ II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick™ II reports results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only 3 simple test procedures, Arsenic Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 5