- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Bacharach 3015-5148 PGM-IR Portable Gas Detector - SF6
Item #:
3015-5148
Brand:
Bacharach
Share this product:
3015-5148 PGM-IR Portable Gas Detector - SF6 by Bacharach
The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted average (TWA) with a resolution down to 1 ppm.
The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good "zero" baseline, enabling the monitor to be used in contaminated environments without affecting the readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check mode with "tick-rate" audible / visual alarms. The PGM-IR's probe helps to locate leaks in small or hard to reach places and provides up to 12 hours operation on a fully charged battery.
Features & Benefits:
- Long-life, Non-Dispersive Infrared (NDIR) sensor allows for precision low-level leak detection
- Detection and measurement of CFC, HFC and HCFC refrigerants, as well as CO2, N2O and SF6 gases
- Locates leaks in contaminated or high-ventilation areas - immune to changes in temperature and humidity
- Cut leak inspection times by 50%
- Instrument comes with battery pack, probe, charger and soft case with shoulder strap
- LCD screen displays real-time gas concentrations with an audible tick-rate to pinpoint source of leaks
- Locate leaks within display cases where traditional leak detectors cannot
- Applications include refrigerant gas detection, trace gas analysis and medical monitoring
Includes:
- Rechargeable battery pack
- 120 VAC charging adapter
- Soft case
Gas Library | |
CFC | R-11, R-12, R-113, R-114, R-502, HFP |
HFC | R-404a (HP62), R-407a, R-407c (AC9000), R-134a, R-410a (AZ20), R-507 (AZ50), R-508b (SUVA95), R236FA, R125, R245Fa, R422a, R422d, R427a, R424a, R426a and R438a, R407F |
HCFC | R-22, R-123, R-124, R-500, R-503, R-401a (MP39), R-402a (HP80), R-402b (HP81), R-408a, R-409a, R-23, R21, R227 |
HALON | H1301,H2402, H1211 |
Other | FA188, FC72, N1230, H1234YF, H1234ZE, N7000, N7200, N7300, N7600 |
Measuring Range | All gases 0 to 10,000 ppm |
Warm-Up Time | 5 minutes (300 seconds) |
Detector Type | Infrared, Non-Dispersive |
Sensitivity | 1 ppm |
Accuracy | ±1 ppm ±10% of reading from 0-1000 ppm (For R11, R22, R113: ±10 ppm ±15% of reading from 0-1000 ppm) |
Response Time | 90% of response within 5 seconds; 100% in 7 seconds |
Temperature Drift | 1.5 ppm per °C between purge cycles |
System Noise | .Less than 40dB (A) at 10 ft (3 m) |
Operating Temperature | 32 to 122°F (0 to 50°C) |
Ambient Humidity | 5 to 90% RH (non-condensing) |
Altitude Limit | 6,562 ft (2,000 m) |
Power | DC power pack, provides 8 -12 hours of operation |
Power Consumption | 15 Watts maximum |
Front panel | 3 indicator lights ON: Green LED flashes during warm-up, then glows steadily during normal operation FAULT: Yellow LED flashes when there is a system fault ALARM: Red LED flashes when the gas level is above its alarm setting |
Audible Alarm | Internal audible alarm programmable for any of the following conditions: OFF, FAULT/ALARM, ALARM |
Dimensions (D x L x W) | 9.0 x 14.5 x 5.0 inches (229 x 368 x 127 mm) |
Weight | Less than 9 lbs (4 kg) including battery |
Valid Calibration Period to Specifications | 12 months |
Warranty | 2 years from date of shipment |