SE International Inspector Wipe Test Plate with Metal Rails for for SN# 30328 & above

Inspector Wipe Test Plate with Metal Rails by SE International

The stainless steel WipeTest Plate slides easily onto the Inspector positioning the depression and wipe directly in front of the GM tube window at a fixed distance of 1 centimeter. The WipeTest plate is removable for general surveying. (patent #5,936,246) Many of the customers using The Inspector Wipe Test Plate also use it as a Beta Shield for the 2-inch GM detector. (patent# 5,936,246)

Inspectors with a SN# of 30327 or lower are compatible with The Wipe Test Plate w/ Metal Rails. (SEI Part# WTPA)

Utility Menu

The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.

• 3 second (fast response)
• Switches from mR/hr and CPM to µSv/hr and CPS
• Reset the cal factor to 100.
• Adjust the CAL factor.
• Reset all setting to default factory setting.

Note: Be sure to check the Serial Number of your unit prior to ordering!!