- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Oakton CON 610 Portable Waterproof Conductivity Meter with Kit, with NIST Traceable Certificate of Calibration - WD-35408-81
Item #:
WD-35408-81
Brand:
Oakton Instruments
Share this product:
WD-35408-81 CON 610 Portable Waterproof Conductivity Meter with Kit, with NIST Traceable Certificate of Calibration by Oakton
Conductivity, TDS, resistivity, salinity—measure from pure water to seawater!
- Includes conductivity probe, conductivity standards (60mL each of 1413 µS, 12.88mS, 3000 ppm, and rinse water), rubber boot, electrode holder, batteries, and hard carrying case
- Durable waterproof and dustproof design with IP67 rating – Even with no probes attached
- Single or multipoint calibration; auto or manual – Fast, trouble-free calibration for more accurate measurements
- Large backlit graphic display – Multi-line display with electrode status indicator, calibration data, and more
- User-settable “calibration due” alarm – Out-of-date or unperformed calibrations are now things of the past!
- Built-in real-time clock – Time-and-date stamping meets Good Laboratory Practice (GLP) standards
- Advanced data management – Store up to 500 data sets and download via Infrared IrDA wireless interface
- Set point alarms – Audible warning when readings are outside set points limit
- Accept 2-cell and 4-cell conductivity probes – Measure over a broad conductivity range up to 500 mS/cm
- Password protection – Security for calibration and setup menus
- Rugged rubber boot – Protects meter from bumps and dings (optional; included with kits)
Conductivity | 0 to 200.0 mS |
TDS | 0 to 200 ppt |
Temperature | –10.0 to 110.0°C (14.0 to 230.0°F) |
Resolution | 0.05% full-scale; 0.1ºC (0.1ºF) |
Accuracy | ±1% full-scale; ±0.5ºC (±0.9ºF) |
Calibration | Manual cal, up to 5 points (1 per range); automatic up to 4 points (84.0 μS/cm, 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm). Temperature offset 0.1°C (0.1°F) increments. |
TDS factor | 0.40 to 1.00 |
Cell constant | 0.010 to 10.000 |
Memory | up to 500 sets with GLP date and time |
Output | infrared, IrDA |
Real-time clock | time-and-date stamp on calibration and stored data |
Temperature normalization | 15 or 30ºC |
Temperature coefficient | linear or pure (610 only) |
Temperature compensation | automatic or manual (selectable) from 0 to 100°C |
Ambient operating temperature | 0 to 50°C (32 to 122°F) |
Power | four 1.5 V AA batteries (included) or optional universal AC adapter, up to 200 hours continuous use |
Dimensions | Meter: 7.25"L x 3.25"W x 2.25"H (18.4 x 8.3 x 5.7 cm) Boxed: 9.13"L x 9.13"W x 2.75"H (23 x 23 x 7 cm) |
Weight | Meter: 1 lb (0.5 kg) Boxed: 2 lb (0.9 kg) |