- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
TPI 9020 Pro Vibration Meter
Item #:
TPI-9020
Brand:
Test Products International
Share this product:
9020 Pro Vibration Meter by Test Products International
The next step in vibration analysis: easy to use low cost Machinery Health Monitoring. Diagnose basic vibration problems: out of balance, misalignment, looseness, and bearing damage.
Benefits:
- Automatically detects out of balance, misalignment, looseness and bearing defects
- Predictive analysis capabilities that accurately calculate time frame to failure
- Condition based monitoring analyzes bearing wear and gear degradation
- Saves and reads measurement values to/from RFID tags with Optional RFID
- Built-in IEPE (constant current) accelerometer power supply
- Rugged fully waterproof construction meets IP67 and MIL-STD-810F requirements.
Applications:
- Commercial / Industrial HVAC
- Food Processing
- Manufacturers
- Mining
- Packaging
- Petrochemical
- Printing and Paper Processing
- Utilities
| Size | 8.7" x 3.7" x 1.8" (220 mm x 95mm x 45mm) |
| Weight | 1.1 lb (500g)(not including accelerometer) |
| Environmental | Water: MIL-STD-810F, Method 512.4 IP67 sealed against accidental immersing (1m for 30 min) Drop: MIL-STD-810F, Method 516.5, Procedure IV 26 drops from 1.22 m 6 additional drops at -4°F (-20°C) 6 additional drops at 140°F (60°C) Operating: -22° to 149°F (-30° to 65°C) Storage: -40° to 158°F (-40° to 70°C) Humidity: MIL-STD-810F, Method 507.4 Sand and Dust: IP67, Mil-STD-810F, Method 510.4, Procedures I and II |
| Power Supply | Rechargeable battery (charger included) |
| Battery life | Typically 8-20 hours operating time depending on backlight usage. |
| Frequency ranges | 0 Hz to 1 kHz 0 Hz to 15 kHz |
| Frequency resolution | Up to 0.3 Hz 400, 800, 1600, 3200 |
| Displayed amplitude units | Acceleration in g Velocity in mm/s ( or inches/s) Bearing noise in BDU (bearing damage units) |
| Displayed frequency units | Hertz (Hz), RPM or CPM |
| Input range | ± 50g with standard 25mV/g TPI accelerometer |
| Dynamic range | 120 dB ± 50g to ± 0.0004g with standard accelerometer |
| Auto set up of VA diagnostic bands (RPM = run speed) | Instability 0Hz - 0.75 x RPM Unbalance 0.75 x RPM - 1.5 x RPM |
| Envelope demodulation filters | Fully user selectable high pass and low pass filter cut off frequencies |
| Accelerometer connection | BNC |
| IEPE accelerometer interface | Constant current accelerometer power supply (+20 volts @ 2mA) can be switched off for use w/ BNC output control panels |
| Numeric Keypad or Touch screen operation | Stylus free collection of vibration data using numeric key pad or by touching screen |
| Included accessories | Carrying case with neck strap Stylus lanyard Docking station |
