- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
ScichemTech SCT BEN-ISE-2 pH/MV/ISE/Cond/DO Meter - SCT-108.003.10
Item #:
SCT-108-003-10
Brand:
ScichemTech
Share this product:
SCT-108.003.10 SCT BEN-ISE-2 pH/MV/ISE/Cond/DO Meter by ScichemTech
Sct benchtop pH/MV/ISE/Conductivity/DO meter is the high precision multi parameter measurement instrument.
It has high pure water pH/Conductivity measurement mode.
It has large measurement range and high accuracy conductivity measurement mode can be switch to TDS salinity and resistivity.
DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.
10 kinds of common ion can be selected in the ion concentration measuring mode. User can self define other ions.
Can switch 4 kinds of concentration unit px, mol / l, mg/l and ppm.
Instrument resolution pH 0.001, conductivity 0.5, ISE 0.01.
Includes:
- Flexible electrode holder
- Intelligent stirrer
- pH/ATC three-in-one combination electrode
- Glass pH combination electrode
- Temperature electrode
- Conductivity electrode
- DO electrode
- Double salt bridge reference electrode
- pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
- 1413us/cm conductivity standard solution
- 9V power adapter
- 6V power adapter
- Membrane cap
- DO electrode inner solution
- Cathode polishing paper stirring bead
- AA battery
- RS-232 communication cable
- Communication software disk
- Operation manual
- Packing list
Features:
- SCT meter meets with the requirement of international glp standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
- There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
- Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
- High purified water and ammonia added purified water pH measuring mode can be set up.
- With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
- Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
- Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
- Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enters into temperature compensation of nonlinear mode.
- Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
- Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
- There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
- Can switch 4 kinds of concentration unit : px, mol/l, mg/l and ppm
- Each meter is coded with unique serial number.
- Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
- SCT benchtop meter meets : ISO9001 & CE standards.
pH MEASURING RANGE | -1.999 ~ 19.999 pH |
pH RESOLUTION | 0.1/0.01/0.001 pH |
pH ACCURACY | ±0.002 pH |
pH INPUT CURRENT | ≤1×10-12 A |
pH INPUT IMPENDANCE | ≥3×1012 Ω |
pH STABILITY | ±0.002 pH/3H |
pH TEMP. COMPENSATION RANGE | (0 TO 100) (AUTOMATIC OR MANUAL) |
MV MEASURING RANGE(MV/ORP/EH) | -1999.9MV ~ 0 ~ 1999.9MV |
MV RESOLUTION | 0.1MV |
MV ACCURACY | ±0.03% FS |
ION CONCENTRATION MEASURING RANGE | 0.00 ~ 14.00 PX |
ION CONCENTRATION DISPLAY UNIT | PX MOL/L MG/L PPM |
ION CONCENTRATION ACCURACY | ±0.5 % |
ION CONCENTRATION TEMP. COMPENSATION RANGE | 0 TO 60 AUTOMATIC OR MANUAL |
CONDUCTIVITY MEASURING RANGE | CONDUCTIVITY 0.00~20.00 uS/CM 20.0~200.0 uS/CM, 200~2000 uS/CM 2.00~20.00 mS/CM, 20.0~200.0 mS/CM 200~2000 mS/CM K=10 RESISTIVITY 0 ~ 100 MΩ·CM TDS: 0 ~ 100 G/L SALINITY 0 ~ 100 PPT |
CONDUCTIVITY RESOLUTION | 0.01/0.1/1ΜS/CM 0.01/0.1/1 MS/CM |
CONDUCTIVITY ACCURACY | ±0.5% FS |
CONDUCTIVITY TEMP. COMPENSATION RANGE | 0 ~ 50 AUTOMATIC |
CONDUCTIVITY ELECTRODE CONSTANT | 0.1 / 0.5 / 1 / 5 / 10 / 50 / 100 CM-1 |
CONDUCTIVITY REFERENCE TEMPERATURE | 25 20 AND 18 |
DISSOLVED OXYGEN MEASURING RANGE | 0 ~ 40.00 MG/L(PPM) 0 ~ 200.0 % |
DISSOLVED OXYGEN RESOLUTION | 0.1/0.01 MG/L(PPM) 1/0.1 % |
DISSOLVED OXYGEN ACCURACY | ±0.10 MG/L |
DISSOLVED OXYGEN RESPONSE TIME | ≤30 S 25, 90% RESPONSE |
DISSOLVED OXYGEN RESIDUAL CURRENT | ≤0.1 MG/L |
DISSOLVED OXYGEN TEMP. COMPENSATION RANGE | 0 ~ 45 AUTOMATIC |
DISSOLVED OXYGEN SALINITY COMPENSATION RANGE | 0 ~ 45 PPT AUTOMATIC |
DISSOLVED OXYGEN AIR PRESSURE COMPENSATION | 80 ~ 105 KPA AUTOMATIC |
DISSOLVED OXYGEN AUTOMATIC CALIBRATION | AIR SATURATED BY WATER; WATER SATURATED BY AIR |
DISSOLVED OXYGEN ELECTRODE TYPE | POLAROGRAM TYPE |
TEMPERATURE MEASURING RANGE | -10~ 110 |
TEMPERATURE RESOLUTION | 0.1 |
TEMPERATURE ACCURACY | 5~ 60 RANGE ±0.4 OTHER RANGE ±0.8 |
DATA STORAGE | 300 GROUPS |
STORAGE CONTENT | MEASURING VALUE SERIES NUMBER, MEASURING VALUE, TEMPERATURE, ATC OR MTC STATE, MEASURING DATE AND TIME |
POWER | DC9V/300MA |
COMMUNICATION CONNECTOR | RS232 |
SIZE AND WEIGHT | 160 × 190 × 70MM/880G |
QUALITY AND SAFETY CERTIFICATION | ISO9001:2008, CE |
ENVIRONMENT TEMPERATURE | 5 ~ 35 0.01GRADE 15 ~ 30 0.001GRADE |
ENVIRONMENTAL HUMIDITY | ≤75% |
IP RATING | IP54 DUSTPROOF AND WATERPROOF |