- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
mPower Electronics POLI Pump usCSAc PID/LEL/O2/H2S + CO - MPA1-81AAA6-010L0
Item #:
MPA1-81AAA6-010L0
Brand:
mPower Electronics
Share this product:
MPA1-81AAA6-010L0 POLI Pump usCSAc PID/LEL/O2/H2S + CO by mPower Electronics
The POLI multi-gas meters offer 4-gas monitoring of toxic gases, oxygen (O2), combustibles (LEL), carbon dioxide (CO2) and volatile organic compounds (VOCs). The POLI MP400P is an advanced model with built-in pump that allows a full selection of sensors for a wide range of applications, including Confined Space Entry, while the POLI MP400 is a basic, 4-gas diffusion detector for worker safety at hazardous locations. Smart sensors carry calibration and ID information with them for quick exchange in the field during Hazmat response. Specific sensors include electrochemical (EC) for carbon monoxide (CO), hydrogen sulfide (H2S), ammonia (NH3), hydrogen cyanide (HCN), hydrogen chloride (HCl), chlorine (Cl2), chlorine dioxide (ClO2), nitric oxide (NO), nitrogen dioxide (NO2), sulfur dioxide (SO2), ethylene oxide, methyl mercaptan, and others. Also available are pellistor for LEL level combustibles, non-dispersive infrared (NDIR) for Vol% level CO2 or methane, and photo-ionization detector (PID) for ppm level VOCs. Use of combination CO/H2S or SO2/H2S and CH4/CO2 sensors allows up to 6 gas measurements in a single instrument. The MP400/400P has rugged construction and easy-to-learn 2-button operation. The unique Man-Down alarm feature notifies team workers wirelessly if a user becomes incapacitated.
Features, Functions and Benefits
- Wide selection of "plug-and-play" Smart Sensors (carry calibration data)
- 4 Sensor slots for up to 6 gas measurements using combination sensor
- 16-Hour rechargeable Li-ion battery
- Pump-off switch and low-power sensor options save battery for longer operation
- 360-Degree LED alarm bar and Man-Down alarm; Flip screen
- USB Micro charger & communications cable
- Optional POLI MonoDock station for automated bump test and calibration
- 6 Months continuous datalogging
- Durable double shot outer case
- Wireless remote team communication available (see mSquad & mPlatoon datasheets)
- Mobile App for POLI simulation and training in smartphone or tablet
Size | 5.74 x 3.31 x 1.65 in (140 x 84 x 42 mm) |
Weight | 15.5 oz (435 g) |
Sensors | Over 30 interchangeable and field-replaceable sensors including PID for VOCs, EC for Toxic and O2, Pellistor for LEL, and NDIR for LEL, Vol% & CO2 |
Response Time (t90) | • 15 seconds (LEL/CO/H2S/O2) • Others vary – see TA Note 4 at www.mpowerinc.com |
Battery | Rechargeable Li-ion pack: 16 hours in diffusion mode, 12 hours with pump |
Direct Readout | • Real-time reading of gas concentration • PID measurement gas and correction factor • Visual compliance indicator • Battery status • Datalogging on/off • STEL, TWA, peak and minimum values • Man-Down alarm on/off |
Display | 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced readability. Automatic screen "flip" feature |
Keypad | 2 Operation keys |
Sampling | Bulit-in pump (MP400P) or diffusion (MP400) |
Calibration | Manual calibration or automated using POLI Docking Box. CaliCase option allows automatic bump test and calibration on up to 4 units simultaneously |
Alarms | • Audible (95 dB @ 30 cm) • Visual (flashing bright red LEDs) • Vibration • On-screen indication of alarm conditions • Man-Down alarm with pre-alarm • Panic Alarm (manual) |
Datalogging | Continuous datalogging (6 months for 4 sensors at 1-minute intervals, 24 hours/day and 7 days/week) |
Charging and Communication | Charging, data download, instrument setup and firmware upgrades on PC or laptop via PC comm, cradle, travel charger, or CaliCase. |
Temperature | -4° to 122°F (-20° to 50°C) |
Humidity | 0% to 95% Relative humidity (non-condensing) |
Warranty | • 2 Years on instruments • 2 Years on sensors for LEL, LEL/Vol, O2, CO, CO2, H2S, SO2, HCN, NO, NO2, and PH3 • 1 Year on other sensors |
Sensor | Range |
Resolution |
PIDP | 0-200 ppm 0-2000 ppm 0-10000 ppm |
0.01 ppm 0.1 ppm 1 ppm |
Oxygen (O2) | Lead Wool: 0-30%Vol |
Lead Wool: 0.1%Vol |
Lead-Free: 0-30%Vol |
Lead-Free: 0.1%Vol |
|
Combustibles (LEL%) | 0-100%LEL |
0.1%/1%LEL |
NDIR Methane (LEL%) | 0-100%LEL |
1%LEL |
NDIR Methane (Vol%) | 0-100%Vol |
0.1%Vol |
Dual-Range LEL%/Vol% | 0-100%Vol |
1%LEL |
NDIR Dual-gas CH4 | 0-100%LEL |
1%LEL |
Methane + CO2 | 0-50000 ppm |
100 ppm |
CO2 (Carbon Dioxide) | 0-50000 ppm |
100 ppm |
CO (Carbon Monoxide) | 0-1000 ppm |
1 ppm |
H2S (Hydrogen Sulfide) | 0-1000 ppm |
1 ppm |
CO + H2S | CO: 0-500 ppm H2S: 0-200 ppm |
CO: 1 ppm H2S: 0.1 ppm |
SO2 + H2S | SO2: 0-20 ppm H2S: 0-100 ppm |
SO2: 0.1 ppm H2S: 0.1 ppm |
NH3 (Ammonia)P | 0-100 ppm 0-500 ppm |
1 ppm 1 ppm |
Cl2 (Chlorine)P | 0-50 ppm |
0.1 ppm |
ClO2 (Chlorine Dioxide)P | 0-1 ppm |
0.01 ppm |
COCl2 (Phosgene)P | 0-1 ppm |
0.01 ppm |
H2 (Hydrogen) | 0-1000 ppm |
1 ppm |
HCl (Hydrogen Chloride)P | 0-15 ppm |
0.1 ppm |
HF* (Hydrogen Fluoride)P | 0-20 ppm |
0.1 ppm |
HCN (Hydrogen Cyanide)P | 0-100 ppm |
0.1 ppm |
NO (Nitric Oxide) | 0-250 ppm |
1 ppm |
NO2 (Nitrogen Dioxide)P | 0-20 ppm |
0.1 ppm |
N2O (Nitrous Oxide) | 0-1000 ppm |
10 ppm† |
PH3 (Phosphine) | 0-20 ppm 0-1000 ppm |
0.01 ppm 1 ppm |
SO2 (Sulfur Dioxide) | 0-20 ppm 0-100 ppm |
0.1 ppm 0.1 ppm |
C2H4O (Acetaldehyde)P | 0-20 ppm |
0.1 ppm |
ETO (Ethylene Oxide)P | 0-100 ppm |
0.1 ppm |
CH3SH (Methyl Mercaptan) | 0-10 ppm |
0.1 ppm |
THT (Tetrahydrothiophene)P | 0-40 ppm |
0.1 ppm |
P Use in pumped models is strongly preferred * Check availability † 100 ppm deadband ‡See TA Note 4 for all sensor specifications |