- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
mPower Electronics mPlatoon: USB Dongle (MP603) with built in BLE as License Key for mPower Suite RT vl.Owith wireless system map display - M006-0001-000
Item #:
MP-M006-0001-000
Brand:
mPower Electronics
Share this product:
M006-0001-000 mPlatoon: USB Dongle (MP603) with built in BLE as License Key for mPower Suite RT vl.Owith wireless system map display by mPower Electronics
The mPlatoon is a rapidly deployable (minutes) set of POLI multi-gas monitors that communicate wirelessly in real time to a central command station (mLink-P and computer) with full mapping and alarm software. The mLink can communicate up to 3 km (2 miles) line-of-sight distance directly to multiple MP400HS monitors. It can also connect over that distance to an MP400H, which can host a sub-network of up to 7 MP400S monitors within 0.8 km (0.5 miles). The central mLink modem receives gas readings and any alarm conditions and transmits them by wireless BLE to a local Windows PC or other device within 10 m (33 ft.). The mPower Suite platform can handle up to 32 remote monitors. Each 4- or 5-gas monitor has options for a full range of sensors for toxic gases, oxygen (O2), combustibles (LEL) and carbon dioxide (CO2). The monitors can be worn on the body or mounted magnetically onto any steel surface for rapid placement in situations like hazmat spills, refinery turnarounds or temporary venue protection. The rechargeable batteries run for up to 2 days. Specific sensors include electrochemical (EC) for car-bon monoxide (CO), hydrogen sulfide (H2S), ammonia (NH3), hydrogen cyanide (HCN), hydrogen chloride (HCl), chlorine (Cl2), nitric oxide (NO), nitrogen dioxide (NO2), sulfur dioxide (SO2), methyl mercaptan, and others. Also available are pellistor for LEL level combustibles, and non-dispersive infrared (NDIR) for Vol% level CO2 or hydro-carbons. Use of combination CO/H2S or SO2/H2S sensors allows up to 5 gas measurements in a single instrument. The POLI has rugged construction and easy-to-learn 2-button operation.
Features, Functions and Benefits
- Remote, mobile, wireless real-time readings and alarms including Man-down and Panic.
- Up to 32 remote 4- or 5-gas monitors for a one-time license fee, shown on map overview.
- Up to 3 km (2 miles) line-of-sight distance. Router allows communication around obstructions
- All POLI MP400H/S/HS units alarm if any one unit has an alarm condition.
- Up to 2-day operation on single Li-ion battery charge using new low-power sensors.
Size | 5.0 x 3.6 x 1.9 in. (13 x 9.1 x 5.7 cm) w-o/Antenna 12 x 3.6 x 1.9 in. (30 x 9.1 x 5.7 cm) w/Antenna |
Weight | 16 oz (450 g) |
IP & Temp. | IP54; -4° to 131°F (-20° to 55°C) |
Power Supply | Rechargeable Li-ion battery; ≥24 hrs run time |
Frequency | ISM band (902-928 MHz) FCC Part 15 approved |
Range | Up to 3 km (2 miles) line-of-sight |
RF | 2.5 dBi Antenna |
No. of Devices | Up to 32 Wireless POLI units |
Certifications | Wireless: FCC Part 15; Safety: Non-haz. loc. only |
Size | 5.7 x 3.3 x 1.7 in (140 x 84 x 42 mm) w/o Antenna |
Weight | 15.5 oz (435 g) |
Sampling | Diffusion (MP400H & MP400HS); Pump (MP400S) |
Battery | Rechargeable Li-ion pack, typical run time: • 1 Day – Using NDIR LEL sensor • 2 Days – Using EC sensors only |
Direct Readout | • Real-time gas concentrations; Battery status • STEL, TWA, peak and minimum values |
Display | 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced readability. |
Calibration | Manual calibration. MonoDock option allows auto-mated calibration on individual POLI units |
Frequency | ISM License-free band (902-928 MHz) |
RF | 2.5 dBi Antenna; 20 dBm Peak power |
Wireless Comm | Poll gas concentration readings from Software on Android phone or tablet via mLink-P |
Alarms | Push Notification via mLink-P, plus local audible (95 dB @ 30 cm) and visual (flashing LEDs) alarms |
Direct Comm and Charging | USB cable for charging, download, configuration and upgrades on PC or 100-240V AC charger. |
Temperature | -4° to 122°F (-20° to 50°C) |
Humidity | 0% to 95% Relative humidity (non-condensing) |
IP Rating | IP-67 (IP-65 for MP400S) |
EMC/RFI | EMC directive: 2014/30/EU |
Warranty | • 2 Years on instruments; 1 year on exotic sensors • 2 Years on sensors for pellistor LEL, and O2, CO, H2S, SO2, HCN, NO, NO2, and PH3 EC sensors |
Sensor | Range |
Resolution |
PID | 0-2000 ppm |
0.1 ppm |
Oxygen (O2) | Lead Woo: 0-30%Vol Lead-Free: 0-30%Vol |
Lead Woo: 0.1%Vol Lead-Free: 0.1%Vol |
Combustibles (LEL%) High Resolution version | 0-100%LEL 0-100%LEL |
1%LEL 0.1%LEL |
NDIR Methane (Vol%) Dual-Range version | 0-100%Vol 0-100%Vol |
1%Vol 1%LEL |
CO2 (Carbon Dioxide) | 0-50000 ppm |
100 ppm |
CO (Carbon Monoxide) | 0-1000 ppm |
1 ppm |
H2S (Hydrogen Sulfide) | 0-100 ppm 0-1000 ppm |
0.1 ppm 1 ppm |
CO + H2S | CO: 0-500 ppm H2S: 0-200 ppm |
CO: 1 ppm H2S: 0.1 ppm |
SO2 + H2S | SO2: 0-20 ppm H2S: 0-100 ppm |
SO2: 0.1 ppm H2S: 0.1 ppm |
NH3 (Ammonia) | 0-100 ppm 0-500 ppm |
1 ppm 1 ppm |
Cl2 (Chlorine) | 0-50 ppm |
0.1 ppm |
ClO2 ( Chlorine Dioxide) | 0-1 ppm |
0.01 ppm |
H2 (Hydrogen) | 0-1000 ppm |
1 ppm |
HCl (Hydrogen Chloride) | 0-15 ppm |
0.1 ppm |
HCN (Hydrogen Cyanide) | 0-100 ppm |
0.1 ppm |
NO (Nitric Oxide) | 0-250 ppm |
1 ppm |
NO2 (Nitrogen Dioxide) | 0-20 ppm |
0.1 ppm |
PH3 (Phosphine) | 0-20 ppm 0-1000 ppm |
0.01 ppm 1 ppm |
SO2 (Sulfur Dioxide) | 0-20 ppm 0-100 ppm |
0.1 ppm 0.1 ppm |
ETO (Ethylene Oxide) | 0-100 ppm |
0.1 ppm |
CH3SH (Methyl Mercaptan) | 0-10 ppm |
0.1 ppm |
THT (Tetrahydrothiophene) | 0-40 ppm |
0.1 ppm |