- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
mPower Electronics mSquad 4 Kit (1 Head and 3 Soldiers in 1 hard case), 4-gas (LEL/O2-LF/H2S/CO) - M004-0031-000
Item #:
MP-M004-0031-000
Brand:
mPower Electronics
Share this product:
M004-0031-000 mSquad 4 Kit (1 Head and 3 Soldiers In 1 hard case), 4-gas (LEL/O2-LF/H2S/CO) by mPower Electronics
The mSquad System is a quickly-deployable set of mobile multi-gas meters that communicate wirelessly to a Squad leader up to 0.8 km (0.5 miles) distant. The system is ideal for Hazmat Response, firefighters, temporary venue protection, etc. An mSquad consists of one Head monitor (MP400H) and up to 7 Soldier monitors (MP400S) that communicate with each other. Each 4- or 5-gas monitor has options for a full range of sensors for toxic gases, oxygen (O2), combustibles (LEL) and carbon dioxide (CO2). The MP400S can also have a PID for volatile organic compounds (VOCS). In addition to high gas concentration alarms, all Squad units receive any Man-Down alarms to notify them remotely of a worker in distress. All the Squad monitors are Class I Division I certified to operate in hazardous zones. The entire mSquad is mobile, running on batteries for up to 12 hours. The MP400S and MP400H have rugged construction and easy-to-learn 2-button operation.
Features, Functions and Benefits
- Remote, wireless real-time readings and alarms including Man-down
- Up to 8 remote 4- or 5-gas monitors
- Up to 0.8 km (0.5 miles) distance to Squad Head
- All mSquad units alarm if any one unit has an alarm condition
- Mobile system operation
- 12-hour continuous operation on single Li-ion battery charge.
- USB Micro cable for battery charging and direct PC communication
- Wide selection of sensor types
Size | 5.7 x 3.3 x 1.7 in (140 x 84 x 42 mm) w/o Antenna |
Weight | 15.5 oz (435 g) |
Sensors | Interchangeable and field-replceable: PID for VOCs (MP400S only), EC for Toxic & O2, Pellistor for LEL, and NDIR for LEL, Vol% & CO2 |
Response time (t90) | • 15 s (LEL/CO/H2S/O2) MP400S • 20 s (LEL/CO/H2S/O2) MP400H • Others vary up to 120 s |
Sampling | MP400S - Internal pump; MP400H - Diffusion |
Battery | 8-36 hr (depending on sensors and pump installed) |
Direct Readout | • Real-time reading of gas concentration • PID measurement gas and correction factor • Battery status • STEL, TWA, peak and minimum values • Man-Down alarm on/off |
Display | 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight and auto "flip" screen |
Range | 0.8 km (1/2 mile) between MP400H and MP400S |
Frequency | ISM band (902-928 MHz) FCC Part 15 approved |
Calibration | Zero and span calibration. Single or multiple sensor simultaneous calibration settings |
Monitors | Up to 8 per mSquad (1 MP400H plus 7 MP400S) |
Alarms | • Audible (95 dB @ 30 cm) • Visual (flashing bright red LEDs) • Vibration • On-screen indication of alarm conditions • Man-Down alarm and manual Panic alarm |
Wireless Alarm Notification | Alarm on any monitor sent to all others in mSquad for 5 seconds, then remains on at MP400H |
Datalogging | Continuous datalogging (6 months for 4 sensors at 1-minute intervals, 24 hours/day and 7 days/week) |
Direct PC Comm and Charging | USB cable for charging, data download, instrument setup and firmware upgrades on PC or 100-240V AC charger, or CaliCase. |
Temperature | -4° to 122°F (-20° to 50°C) |
Humidity | 0% to 95% Relative humidity (non-condensing) |
IP Rating | IP-65 MP400S (pump); IP-67 MP400H (diffusion) |
EMC/RFI | EMC directive: 2014/30/EU |
Warranty | • 2 Years on instruments • 2 Years on sensors for pellister LEL, and O2, CO, H2S, SO2, HCN, NO, NO2, and PH3 EC sensors • 1 Year on other sensors |
Sensor | Range |
Resolution |
PID | 0-200 ppm 0-2000 ppm |
0.01 ppm 0.1 ppm |
Oxygen (O2) | Lead Woo: 0-30%Vol Lead-Free: 0-30%Vol |
Lead Woo: 0.1%Vol Lead-Free: 0.1%Vol |
Combustibles (LEL%) | 0-100%LEL |
1%LEL |
Hydrocarbons (Vol%) | 0-100%Vol |
0.1%Vol |
Dual-Range LEL%/Vol% | 0-100%Vol |
1%LEL |
CO2 (Carbon Dioxide) | 0-50000 ppm |
100 ppm |
CO (Carbon Monoxide) | 0-1000 ppm |
1 ppm |
H2S (Hydrogen Sulfide) | 0-100 ppm 0-1000 ppm |
0.1 ppm 1 ppm |
CO + H2S | CO: 0-500 ppm H2S: 0-200 ppm |
CO: 1 ppm H2S: 0.1 ppm |
SO2 + H2S | SO2: 0-20 ppm H2S: 0-100 ppm |
SO2: 0.1 ppm H2S: 0.1 ppm |
NH3 (Ammonia) | 0-100 ppm 0-500 ppm |
1 ppm 1 ppm |
Cl2 (Chlorine) | 0-50 ppm |
0.1 ppm |
ClO2 ( Chlorine Dioxide) | 0-1 ppm |
0.01 ppm |
H2 (Hydrogen) | 0-1000 ppm |
1 ppm |
HCl (Hydrogen Chloride) | 0-15 ppm |
0.1 ppm |
HF (Hydrogen Fluoride) | 0-20 ppm |
0.1 ppm |
HCN (Hydrogen Cyanide) | 0-100 ppm |
0.1 ppm |
NO (Nitric Oxide) | 0-250 ppm |
1 ppm |
NO2 (Nitrogen Dioxide) | 0-20 ppm |
0.1 ppm |
PH3 (Phosphine) | 0-20 ppm 0-1000 ppm |
0.01 ppm 1 ppm |
SO2 (Sulfur Dioxide) | 0-20 ppm 0-100 ppm |
0.1 ppm 0.1 ppm |
C2H4O (Acetaldehyde) | 0-20 ppm |
0.1 ppm |
ETO (Ethylene Oxide) | 0-100 ppm |
0.1 ppm |
CH3SH (Methyl Mercaptan) | 0-10 ppm |
0.1 ppm |
THT (Tetrahydrothiophene) | 0-40 ppm |
0.1 ppm |
Sensor Configuration | Monitor |
Pump |
Time |
NDIR LEL/VOL/O2/CO/H2S | MP400H MP400S MP400S |
None Off On |
36 hr 36 hr 24 hr |
NDIR LEL/VOL/PID/O2/CO+H2S | MP400H MP400S MP400S |
None Off On |
20 hr 20 hr 15 hr |
Pellistor LEL/O2/CO/H2S | MP400H MP400S MP400S |
None Off On |
12 hr 12 hr 10 hr |
Pellistor LEL/PID/O2/CO+H2S | MP400H MP400S MP400S |
None Off On |
10 hr 10 hr 8 hr |