In-line Temperature Meters

378JC Digital Thermometer Controller with Analog Voltage Output, Range 0 to 550 蚓 by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, � 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is � 3蚓 or � 5蚌. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds � 3 seconds. 115/230V AC operation.

378JF Digital Thermometer Controller with Analog Voltage Output, Range 0 to 1000 °F by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, � 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is � 3蚓 or � 5蚌. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds � 3 seconds. 115/230V AC operation.

378KC Digital Thermometer Controller with Analog Voltage Output, Range 0 to 1000 蚓 by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, � 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is � 3蚓 or � 5蚌. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds � 3 seconds. 115/230V AC operation.

378KF Digital Thermometer Controller with Analog Voltage Output, Range 0 to 1999 °F by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, � 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is � 3蚓 or � 5蚌. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds � 3 seconds. 115/230V AC operation.

378TF Digital Thermometer Controller with Analog Voltage Output, 1/8 DIN, Type T by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, � 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is � 3蚓 or � 5蚌. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds � 3 seconds. 115/230V AC operation.

765EC Thermocouple Panel Thermometer, Type E, Range -105 to 1000 蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765EF Thermocouple Panel Thermometer, Type E, Range -157 °F to 1832 °F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765JC Thermocouple Panel Thermometer, Type J, Range -210 to 760 蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765JF Thermocouple Panel Thermometer, Type J, Range -346蚌 to 1400蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765KC Thermocouple Panel Thermometer, Type K, Range -105 to 1372 蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765KF Thermocouple Panel Thermometer, Type K, Range -157蚌 to 1999蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765PTAC Thermocouple Panel Thermometer, Type PTA, Range -50.00 to 199.9 蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765PTAF Thermocouple Panel Thermometer, Type PTA, Range -58蚌 to 199.9蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765PTBF Thermocouple Panel Thermometer, Type PTB, Range -58蚌 to 1562蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765TC Thermocouple Panel Thermometer, Type T, Range -105 to 400 蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

765TF Thermocouple Panel Thermometer, Type T, Range -157蚌 to 752蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.2%, features a bright red LED display and 1/8 DIN plastic housing. 蚓/蚌 selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60蚓. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• 蚓/蚌 selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

768JC-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type J, Range 0 to 220 蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.5% of span � 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees 蚓 or 蚌. Ambient range 0 to 40蚓. 115/230V AC operation.

768JF-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type J, Range 32 to 428 蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.5% of span � 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees 蚓 or 蚌. Ambient range 0 to 40蚓. 115/230V AC operation.

768KC-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type K, Range -20 to 390蚓 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.5% of span � 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees 蚓 or 蚌. Ambient range 0 to 40蚓. 115/230V AC operation.

768KF-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type K, Range -2 to 752 蚌 by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of � 0.5% of span � 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees 蚓 or 蚌. Ambient range 0 to 40蚓. 115/230V AC operation.

77A-E Thermocouple/RTD 2-Wire Transmitter, Type E, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-J Thermocouple, Type J, 2-Wire Temperature Transmitter, Temperature Range 0 - 300°C (77A-02/0000/+0300/CEL) or 0 - 700°C (77A-02/0000/+0700/CEL) by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-K Thermocouple/RTD 2-Wire Transmitter, Type K, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-RTD, Type RTD, 2-Wire Temperature Transmitter and 3-Wire RTD Connection, Temperature Range 0 - 250°F (77A-11/0000/+0250/FAH) or 0 - 500°F (77A-11/0000/+0500/FAH) by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77A-T Thermocouple/RTD 2-Wire Transmitter, Type T, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77E Thermocouple/RTD 2-Wire Transmitter, Type E, Ambient Temperature Range -10 to 70 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77J Thermocouple/RTD 2-Wire Transmitter, Type J, Ambient Temperature Range -10 to 70 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77K Thermocouple/RTD 2-Wire Transmitter, Type K, Ambient Temperature Range -10 to 70 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77RTD Thermocouple/RTD 2-Wire Transmitter, Type RTD, Ambient Temperature Range -10 to 70 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

77T Thermocouple/RTD 2-Wire Transmitter, Type T, Ambient Temperature Range -10 to 70 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

791JC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791JF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791KC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791KF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LJC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LJF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LKC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LKF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTAC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTAF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, LCD Display by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791PTBC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, LCD Display by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify 蚓 or 蚌. Ambient range 0 to 40蚓. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

7000APL Microprocessor Panel Meter, 1/8 DIN, Selectable by Jenco

Panel mount digital thermometer user selectable for type via external dip switch with front panel touch switch for selecting 蚓 or 蚌. Features bright red LED display and a 1/8 DIN plastic housing. Model 7001APL has Min/Max switch for display of Min/Max temperatures. Available for types. J, K, T, E, N, R, S, DIN-T and DIN J. Ambient range-10 to 60蚓. 115/230V AC operation.

• CMOS microcomputer design
• Cold junction compensation
• T/c calibration for types-k,j,t,e,n,r,din t,din j
• T/c type, resolution and unit default select by dip switch
• Wide temperature ranges
• Error indicators
• Front panel 蚓/蚌 selectable
• 1蚓/0.1蚓 resolution selectable
• Min/max display
• 0.56 led display
• Easy to install, metal mounting bracket
• Wide operation temperature
• High accuracy and low cost

7001APL Microprocessor Panel Meter, 1/8 DIN, Selectable by Jenco

Panel mount digital thermometer user selectable for type via external dip switch with front panel touch switch for selecting 蚓 or 蚌. Features bright red LED display and a 1/8 DIN plastic housing. Model 7001APL has Min/Max switch for display of Min/Max temperatures. Available for types. J, K, T, E, N, R, S, DIN-T and DIN J. Ambient range-10 to 60蚓. 115/230V AC operation.

• CMOS microcomputer design
• Cold junction compensation
• T/c calibration for types-k,j,t,e,n,r,din t,din j
• T/c type, resolution and unit default select by dip switch
• Wide temperature ranges
• Error indicators
• Front panel 蚓/蚌 selectable
• 1蚓/0.1蚓 resolution selectable
• Min/max display
• 0.56 led display
• Easy to install, metal mounting bracket
• Wide operation temperature
• High accuracy and low cost

Single Relay Controller, 1/4 DIN, Type J. Application: Temperature 蚌, Analog Voltage Output

Single Relay Controller, 1/4 DIN, Type K. Application: Temperature 蚌, Analog Voltage Output

Single Relay Controller, 1/4 DIN, Type RTD. Application: Temperature 蚌, Analog Voltage Output

Single Relay Controller, 1/4 DIN, Type RTD. Application: Temperature 蚓 or 蚌, Analog Voltage Output

Single Relay Controller, 1/4 DIN, Type RTD. Application: Temperature 蚓 or 蚌, Analog Voltage Output

Single Relay Controller, 1/4 DIN, Type T. Application: Temperature 蚓 or 蚌, Analog Voltage Output

Single Relay Controller, 1/4 DIN, Type T. Application: Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type J. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type J. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type K. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type K. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type RTD. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type RTD. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type RTD. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type RTD. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type T. Temperature 蚓 or 蚌, Analog Voltage Output

Dual Relay Controller, 1/4 DIN, Type T. Temperature 蚓 or 蚌, Analog Voltage Output

6312DTF (120V) Fermentable/Sterilizable Dissolved Oxygen Analyzer, 5-Relays 120V by Jenco

• Graphic LCD with manual backlight displays dissolved oxygen, temperature, relay status and transmitter current mA output simultaneously.
• Calibration data is stored in memory and is ready for use on power up.
• Two sets of isolated and reversible 4-20 mA current output for dissolved Oxygen and temperature allows it to be used as a proportional output.
• 4 programmable on/off relays: 3 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.
• IP65

6312DTF (220V) Fermentable/Sterilizable Dissolved Oxygen Analyzer, 5-Relays, 220V by Jenco

• Graphic LCD with manual backlight displays dissolved oxygen, temperature, relay status and transmitter current mA output simultaneously.
• Calibration data is stored in memory and is ready for use on power up.
• Two sets of isolated and reversible 4-20 mA current output for dissolved Oxygen and temperature allows it to be used as a proportional output.
• 4 programmable on/off relays: 3 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.
• IP65

pH, mV (ORP), Temp Controller for Aquariums

6309PDT pH, D.O., Temperature, Dual Parameter Analyzer, Graphic Display, 5-Relays by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

77AE-1000C 77A Temperature Transmitter, Type E, Temperature Range: 0 To 1000 C (32 To 1832 F) by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED𠏋 brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available