- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
SMC ISE30A Digital Pressure Switch, 2-Color Display, High Precision for Positive Pressure - ISE30A-N01-B-PG
Item #:
ISE30A-N01-B-PG
Brand:
SMC
Share this product:
ISE30A Digital Pressure Switch, 2-Color Display, High Precision for Positive Pressure by SMC
Pressure Switch Series ISE30A is a high precision (for positive pressure) with two color digital display allows you to choose the setting according to your application requirements. 4 different display settings are available. Abnormal conditions can be detected at a glance.
- Settings can be copied to up to 10 slave sensors at once
- Possible to check set-value during key locking
- 3-step setting
- 4-digit display
- Pin code function available
- Replaceable one-touch fittings
Product contains:
- SMC 2 COLOR HIGH PRECISI ON DIG PRES SWITCH
- N01 (NPT 1/8, M5 Female Thread)
- B (PNP Open Collector 2 Outputs)
- P (w/Unit Display Switching Function, Initial Value PSI)
- G (Lead Wire w/Connector & Connector Cover)
| Model No. | ZSE30A (vacuum) |
ZSE30AF (compound) |
ISE30A (positive pressure) |
||
| Rated pressure range | 0.0 to -101.0 kPa |
-100.0 to 100.0 kPa |
-0.100 to 1.000 MPa |
||
| Set pressure range | 10.0 to -105.0 kPa |
-105.0 to 105.0 kPa |
-0.105 to 1.050 MPa |
||
| Withstand pressure | 500 kPa |
500 kPa |
1.5 MPa |
||
| Minimum display unit | 0.1 kPa |
0.1 kPa |
0.001 MPa |
||
| Applicable fluid | Air, inert gases and incombustible gases |
||||
| Power supply voltage | 12 to 24 VDC ±10%, ripple (p-p) 10% or less (protected against reverse connection) |
||||
| Current consumption | 40 mA or less |
||||
| Switch output | NPN or PNP open collector output : 1 output NPN or PNP open collector output : 2 outputs (selectable) |
||||
| Max. load current | 80 mA |
||||
| Max. applied voltage | 28 V (NPN output) |
||||
| Residual voltage | 1 V or less (at 80 mA load current) |
||||
| Response time | 2.5 ms or less (with anti-chatter function: 20, 100, 500, 1000 or 2000 ms selected) |
||||
| Short circuit protection | Provided |
||||
| Repeatability | ±0.2%F.S. ±1 digit |
||||
| Hysteresis | Hysteresis mode | 0 to variable *1
|
|||
| Window comparator mode | |||||
| Analogue output | Voltage output *2 | Output Voltage (rated pressure range) | 1 to 5 V ±2.5%F.S. |
0.6 to 5 V ±2.5%F.S. |
|
| Linearity | ±1%F.S. |
||||
| Output impedance | approx. 1 kΩ; |
||||
| Current output *3 | Output current (rated pressure range) | 4 to 20 mA ±2.5%F.S. |
2.4 to 20 mA ±2.5%F.S. |
||
| Linearity | ±1%F.S. |
||||
| Load impedance | Max. load impedance: 300 Ω (at power supply voltage of 12 VDC); 600 Ω (at power supply voltage of 24 VDC)
Min. load impedance: 50 Ω |
||||
| Display | 4 digits, 7-segment, dual-colour display (red/green) |
||||
| Display accuracy | ±2%F.S. ±1digit (at ambient temperature 25±3 °C) |
||||
| Indicator LED | LED is ON when output is ON OUT1: Green OUT2: Red |
||||
| Environment | Enclosure | IP40 |
|||
| Ambient temperature range | Operation: 0 to 50 °C, Storage: -10 to 60 °C (no condensation or freezing) |
||||
| Ambient humidity range | Operation, Storage: 35 to 85%RH (no condensation) |
||||
| Withstand voltage | 1000 VAC, 1 minute between terminals and case |
||||
| Insulation resistance | 50 MΩ or more at 500 VDC between terminals and case |
||||
| Temperature characteristics | ±2%F.S. (25 °C reference) |
||||
| Lead wire | Oil resistant vinyl cabtyre cable 3 cores: φ3.5, 2 m 4 cores: Sectional area of conductor: 0.15 mm2 (AWG26); Outside diameter of insulator: 1.0 mm |
||||
| Standard | CE, UL/CSA, RoHS |
||||
| *1: If the applied voltage fluctuates around the set value, the hysteresis must be set to more than the fluctuation width. Otherwise, chattering will occur. *2: If analogue voltage output is selected, the analogue current output cannot be selected. *3: If analogue current output is selected, the analogue voltage output cannot be selected. |
|||||
| Model No. | 01 |
N01 |
C4H |
C6H |
N7H |
C4L |
C6L |
N7L |
|
| Port size | R1/8 M5x0.8 |
NPT1/8 M5x0.8 |
- |
- |
- |
- |
- |
- |
|
| One-touch fitting straight type | - |
- |
φ4 mm φ5/32 inch |
φ6 mm |
φ1/4 inch |
- |
- |
- |
|
| One-touch fitting elbow type | - |
- |
- |
- |
- |
φ4 mm φ5/32 inch |
φ6 mm |
φ1/4 inch |
|
| Material of wetted parts | Pressure sensing part | Silicone |
|||||||
| Piping port | C3602 (electroless nickel plating) O-ring: HNBR |
PBT, POM, SUS304, C3604 (electroless nickel plating) O-ring: NBR |
|||||||
| Weight | With lead wire and connector attached (3-core, 2 m) | 81 g |
70 g |
71 g |
73 g |
75 g |
73 g |
75 g |
|
| With lead wire and connector attached (4-core, 2 m) | 85 g |
74 g |
75 g |
77 g |
79 g |
77 g |
79 g |
||
| Without lead wire and connector | 43 g |
32 g |
33 g |
35 g |
37 g |
35 g |
37 g |
||
