1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Honeywell Analytics
  3. Model FS20X
  4. Multi-Spectrum Fire and Flame Detectors

Multi-Spectrum Fire and Flame Detectors

Results: 1-24 of 25
Filter by Category
Items per page:
Sort by:
  1. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2

    Brand: Honeywell Analytics | Item #: FS20X-211-21-2

    $4,502.00
  2. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2

    Brand: Honeywell Analytics | Item #: FS20X-211-22-2

    $5,113.00
  3. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3

    Brand: Honeywell Analytics | Item #: FS20X-211-23-3

    $4,456.00
  4. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3

    Brand: Honeywell Analytics | Item #: FS20X-211-24-3

    $5,221.00
  5. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211-21-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211-21-4

    Brand: Honeywell Analytics | Item #: FS20X-211-21-4

    $4,374.00
  6. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211-22-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211-22-4

    Brand: Honeywell Analytics | Item #: FS20X-211-22-4

    $4,906.00
  7. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4

    Brand: Honeywell Analytics | Item #: FS20X-211-23-4

    $4,666.00
  8. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4

    Brand: Honeywell Analytics | Item #: FS20X-211-24-4

    $5,226.00
  9. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2

    Brand: Honeywell Analytics | Item #: FS20X-212-21-2

    $4,502.00
  10. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-22-2QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-22-2

    Brand: Honeywell Analytics | Item #: FS20X-212-22-2

    $5,411.00
  11. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-23-3QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-23-3

    Brand: Honeywell Analytics | Item #: FS20X-212-23-3

    $5,216.00
  12. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3

    Brand: Honeywell Analytics | Item #: FS20X-212-24-3

    $5,769.00
  13. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO HART - FS20X-212-21-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO HART - FS20X-212-21-4

    Brand: Honeywell Analytics | Item #: FS20X-212-21-4

    $5,219.00
  14. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO HART - FS20X-212-22-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO HART - FS20X-212-22-4

    Brand: Honeywell Analytics | Item #: FS20X-212-22-4

    $5,772.00
  15. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-23-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-23-4

    Brand: Honeywell Analytics | Item #: FS20X-212-23-4

    $5,219.00
  16. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-24-4QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-24-4

    Brand: Honeywell Analytics | Item #: FS20X-212-24-4

    $5,772.00
  17. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6

    Brand: Honeywell Analytics | Item #: FS20X-211-10-6

    $4,183.00
  18. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211-21-6QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211-21-6

    Brand: Honeywell Analytics | Item #: FS20X-211-21-6

    $4,870.00
  19. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211-22-6QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211-22-6

    Brand: Honeywell Analytics | Item #: FS20X-211-22-6

    $5,233.00
  20. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211-23-6QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211-23-6

    Brand: Honeywell Analytics | Item #: FS20X-211-23-6

    $4,766.00
  21. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23-8QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23-8

    Brand: Honeywell Analytics | Item #: FS20X-211-23-8

    $4,296.00
  22. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS M25 FM/EN54 - FS20X-211-24-6QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS M25 FM/EN54 - FS20X-211-24-6

    Brand: Honeywell Analytics | Item #: FS20X-211-24-6

    $5,343.00
  23. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR - FS20X-211-24-8QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR - FS20X-211-24-8

    Brand: Honeywell Analytics | Item #: FS20X-211-24-8

    $4,597.00
  24. Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR HART - FS20X-212-23-8QUICK VIEW

    Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR HART - FS20X-212-23-8

    Brand: Honeywell Analytics | Item #: FS20X-212-23-8

    $4,807.00
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2




Item #FS20X-211-21-2
BrandHoneywell Analytics
Price: $4,502.00
Quantity:

FS20X-211-21-2 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2




Item #FS20X-211-22-2
BrandHoneywell Analytics
Price: $5,113.00
Quantity:

FS20X-211-22-2 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3




Item #FS20X-211-23-3
BrandHoneywell Analytics
Price: $4,456.00
Quantity:

FS20X-211-23-3 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3




Item #FS20X-211-24-3
BrandHoneywell Analytics
Price: $5,221.00
Quantity:

FS20X-211-24-3 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211-21-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211-21-4




Item #FS20X-211-21-4
BrandHoneywell Analytics
Price: $4,374.00
Quantity:

FS20X-211-21-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211-22-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211-22-4




Item #FS20X-211-22-4
BrandHoneywell Analytics
Price: $4,906.00
Quantity:

FS20X-211-22-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4




Item #FS20X-211-23-4
BrandHoneywell Analytics
Price: $4,666.00
Quantity:

FS20X-211-23-4 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4




Item #FS20X-211-24-4
BrandHoneywell Analytics
Price: $5,226.00
Quantity:

FS20X-211-24-4 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2




Item #FS20X-212-21-2
BrandHoneywell Analytics
Price: $4,502.00
Quantity:

FS20X-212-21-2 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-22-2
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-22-2




Item #FS20X-212-22-2
BrandHoneywell Analytics
Price: $5,411.00
Quantity:

FS20X-212-22-2 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-23-3
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-23-3




Item #FS20X-212-23-3
BrandHoneywell Analytics
Price: $5,216.00
Quantity:

FS20X-212-23-3 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3




Item #FS20X-212-24-3
BrandHoneywell Analytics
Price: $5,769.00
Quantity:

FS20X-212-24-3 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO HART - FS20X-212-21-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO HART - FS20X-212-21-4




Item #FS20X-212-21-4
BrandHoneywell Analytics
Price: $5,219.00
Quantity:

FS20X-212-21-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO HART by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO HART - FS20X-212-22-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO HART - FS20X-212-22-4




Item #FS20X-212-22-4
BrandHoneywell Analytics
Price: $5,772.00
Quantity:

FS20X-212-22-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO HART by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-23-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-23-4




Item #FS20X-212-23-4
BrandHoneywell Analytics
Price: $5,219.00
Quantity:

FS20X-212-23-4 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) M25 entries, INMETRO, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-24-4
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO, HART module factory installed - FS20X-212-24-4




Item #FS20X-212-24-4
BrandHoneywell Analytics
Price: $5,772.00
Quantity:

FS20X-212-24-4 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6




Item #FS20X-211-10-6
BrandHoneywell Analytics
Price: $4,183.00
Quantity:

FS20X-211-10-6 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211-21-6
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211-21-6




Item #FS20X-211-21-6
BrandHoneywell Analytics
Price: $4,870.00
Quantity:

FS20X-211-21-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211-22-6
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211-22-6




Item #FS20X-211-22-6
BrandHoneywell Analytics
Price: $5,233.00
Quantity:

FS20X-211-22-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211-23-6
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211-23-6




Item #FS20X-211-23-6
BrandHoneywell Analytics
Price: $4,766.00
Quantity:

FS20X-211-23-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23-8
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23-8




Item #FS20X-211-23-8
BrandHoneywell Analytics
Price: $4,296.00
Quantity:

FS20X-211-23-8 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS M25 FM/EN54 - FS20X-211-24-6
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS M25 FM/EN54 - FS20X-211-24-6




Item #FS20X-211-24-6
BrandHoneywell Analytics
Price: $5,343.00
Quantity:

FS20X-211-24-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS M25 FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR - FS20X-211-24-8
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR - FS20X-211-24-8




Item #FS20X-211-24-8
BrandHoneywell Analytics
Price: $4,597.00
Quantity:

FS20X-211-24-8 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR HART - FS20X-212-23-8
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR HART - FS20X-212-23-8




Item #FS20X-212-23-8
BrandHoneywell Analytics
Price: $4,807.00
Quantity:

FS20X-212-23-8 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR HART by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR HART - FS20X-212-24-8
View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR HART - FS20X-212-24-8




Item #FS20X-212-24-8
BrandHoneywell Analytics
Price: $5,319.00
Quantity:

FS20X-212-24-8 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS M25 CU-TR HART by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m2 (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

  • Patented WideBand IR™ Infrared combined with Ultraviolet
  • Detection range greater than 60 m (200 feet) to 0.1 m2 (1 sq. ft.) heptane fire
  • Patented Electronic Frequency Analysis
  • Visible sensor for optimum false alarm rejection
  • Selectable detection sensitivities
  • Solar blind 90° cone-of-vision
  • Dual microprocessors for reliable performance
  • Real-time clock for accurate time dating of events
  • FirePic™ - Up to 6 pre-fire event data storage
  • Event log - Up to 200 events with date and time stamp
  • Built-in RS-485 ModBus communication
  • Built-in non-isolated 4-20 mA analog output (sink or source)
  • Alarm, Fault and Fire Verification relays
  • Automatic Optical Path and Electronic self-test
  • Patented Electronics Module for component protection with plug-in terminations for easy field installation
  • Two 25 mm conduit entries or two 3/4" NPT
  • Low power consumption
  • High RFI and EMI immunity
  • FM hazardous area approved
  • Ex d ATEX approved
  • CU-TR approved
  • INMETRO approved
  • Meets SIL 2 requirements
  • Certified to EN54-10:2002 (option)
  • FM 3260 performance

BENEFITS

  • Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
  • Wide operating temperature range
  • Arc welding immunity
  • False alarm rejection
  • Minimal maintenance for trouble-free operation
  • PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
  • Suitable for a wide variety of applications

APPLICATIONS

  • Refineries and oil production facilities
  • Off-Shore platforms
  • Turbine/Compressor enclosures
  • Acetylene processing and storage
  • Oil and Gas pipelines and pumping stations
  • LNG/LPG loading and unloading facilities
  • Natural Gas and CNG plants
  • Ethanol, Methanol, and IPA production and storage
  • Crude oil and gasoline storage and tank farms
  • Aircraft hangars
  • Hydrogen plants and storage
  • Paint and solvent storage
  • Chemical production, storage, and loading facilities
  • Power plants
  • Silane gas storage
Results: 1-24 of 25
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.