- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna Checktemp® 1C Thermistor Thermometer, Certificate - HI98511
Item #:
HI98511
Brand:
Hanna Instruments
Share this product:
HI98511 Checktemp® 1C Thermistor Thermometer, Certificate by Hanna Instruments
The Checktemp®1 is a high accuracy thermometer with a 1 m (3.3') flexible cable between the meter and the stainless steel probe. The sharp-tip penetration probe easily penetrates semisolid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. These thermometers utilize a NTC thermistor sensor to measure the temperature. Thermistors make it possible to obtain extremely high accuracy in a very short period of time.
The HANNA CAL CHECK® feature has been incorporated into the Checktemp®1. Activate the "test" switch and this device will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F). This assures the user that the reading is reliable and accurate, every time.
Checktemp®1 makes routine controls fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations making it an ideal instrument for measuring temperature according to HACCP requirements.
- ±0.3°C accuracy
- Stainless steel probe with sharp tip for semi-solids
- CAL CHECK®
- Ideal for HACCP requirements
Order Information:
HI 98509 (Checktemp® 1 C) is supplied with battery and instructions.
For model with Factory Calibration Certificate, order HI 98511
Range | -50.0 to 150.0°C |
Resolution | 0.1°C |
Accuracy | ±0.3°C (-20 to 90°C) / ±0.5°C (outside) |
Probe | stainless steel with 1 m (3.3') cable 160 x dia 3 mm (6.3 x dia 0.1") |
Battery Type / Life | 1 x 1.5V AAA / approx. 3 years of use |
Environment | 0 to 50°C (32 to 122°F); RH max 95% |
Dimensions | 106 x 58 x 19 mm (4.2 x 2.3 x 0.7") |
Weight | 80 g (2.8 oz.) - meter only |