- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna Gro'chek Agriculture pH Stick Tester - HI981408
Item #:
HI981408
Brand:
Hanna Instruments
Share this product:
HI981408 Gro'chek Agriculture pH Stick Tester by Hanna Instruments
HI 981408 has been specifically designed to address the needs of growers in hydroponics, greenhouses and nurseries.
The meter has all the features necessary to check the pH of the fertilizer solution during preparation. With a sturdy body, it also floats so that it can be quickly retrieved if accidentally dropped in the tank.
Frequent battery replacement is no longer an issue, the HI 981408 will run for 2000 hours continuously on common AA-type batteries. This translates into more than 2 years of continuous use up to 2 hours a day, seven days a week! Calibration has been simplified to one point through a dial on the front of the meter. The outer casing also incorporates a molded eye so you can hang the meter when not in use.
- Shock-resistant casing
- Long probe is ideal for fertilizer solution in tanks and vats
- 2000 hours of operation on 2 AA batteries
- Floating
- Replaceable probe
Order Information:
HI 981408 is supplied with HI 1219 pH electrode, pH 7 buffer solution, batteries and instructions
Range | 0.0 to 14.00 pH |
Resolution | 0.1 pH |
Accuracy | ±0.02 pH |
Calibration | manual, 1 points |
Electrode | HI 1219 pH electrode, 240 mm (9.4") long, with double junction and DIN connector (included) |
Battery Type / Life | 2 x 1.5V / approx. 2000 hours of continuous use |
Environment | 0 to 50°C (32 to 122°F); RH max 95% |
Dimensions | 86 x 94 x 33 mm (3.4 x 3.7 x 1.3") - meter only |
Weight | 150 g (5.3 oz.) - meter only |