- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna Manual Calibration Dissolved Oxygen Meter - HI9142
Item #:
HI9142
Brand:
Hanna Instruments
Share this product:
HI9142 Manual Calibration Dissolved Oxygen Meter by Hanna Instruments
The ever increasing demand for instant on-site analysis results has created a need for innovative and rugged portable, waterproof meters.
Field work can subject instrumentation to the inclemency of weather. Cold, rain, snow, dust and humidity can cause condensation to breech the housing. Once the housing has been compromised, the meter is susceptible to diminishing performance and life. The rugged, waterproof housing of the HI 9142 solves many of the problems of field use.
Calibration is performed with HI 7040 zero oxygen solution, while 100% calibration is done in air.
The polarographic probe (HI 76407/4) is accurate to 0.3 ppm and is supplied with a 4 m (13') cable that allows measurements to be taken even in hard to reach places.
- Automatic Temperature Compensation
- Affordable and efficient
- DO probe and carrying case included
Order Information:
HI 9142 is supplied with HI 76407/4 probe with 4 m (13’) cable, 2 spare membranes, HI 7041S electrolyte solution (30 mL), calibration screwdriver, batteries, instructions and rugged carrying case.
HI 9142/10 is supplied with everything above but substitutes a 10 m (32.8’) probe cable for the 4 m.
HI 9142/20 is supplied with everything above but substitutes a 20 m (65.6’) probe cable for the 4 m.
O2 Range | 0.0 to 19.9 mg/L (ppm) |
Temperature Range | -5.0 to 50.0ºC (32.0 to 122.0ºF) |
O2 Resolution | 0.1 mg/L (ppm) |
Temperature Resolution | 0.1°C (1ºF) |
O2 Accuracy (@20°C) | ±1.5% F.S. |
Temperature Accuracy (@20°C) | ±0.2°C (±1ºF) (excluding probe error) |
Calibration | manual, at one or two points (zero and slope) |
Temperature Compensation | automatic, 0 to 50°C (32 to 122°F) |
Probe | HI 76407/4 polarographic DO probe with internal temperature sensor, DIN connector and 4 m (13’) cable |
Battery Type / Life | 1.5V AAA (3) / approximately 1,000 hours of continuous use |
Environment | 0 to 50°C (32 to 122°F); RH max 95% |
Dimensions | 185 x 72 x 36 mm (7.3 x 2.8 x 1.4”) |
Weight | 300 g (10.6 oz.) |