Magnetic Stirrers

HI180A-1 Compact Magnetic Mini-Stirrers, 115V, Light Yellow by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180A-2 Compact Magnetic Mini-Stirrers, 230V, Light Yellow by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180B-1 Compact Magnetic Mini-Stirrers, 115V, Light Sea-Green by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180B-2 Compact Magnetic Mini-Stirrers, 230V, Light Sea-Green by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180C-1 Compact Magnetic Mini-Stirrers, 115V, Light Blue by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180C-2 Compact Magnetic Mini-Stirrers, 230V, Light Blue by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180D-1 Compact Magnetic Mini-Stirrers, 115V, Yellow by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180D-2 Compact Magnetic Mini-Stirrers, 230V, Yellow by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180E-1 Compact Magnetic Mini-Stirrers, 115V, Green by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180E-2 Compact Magnetic Mini-Stirrers, 230V, Green by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180F-1 Compact Magnetic Mini-Stirrers, 115V, Blue by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180F-2 Compact Magnetic Mini-Stirrers, 230V, Blue by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180G-1 Compact Magnetic Mini-Stirrers, 115V, Red by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180G-2 Compact Magnetic Mini-Stirrers, 230V, Red by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180H-1 Compact Magnetic Mini-Stirrers, 115V, Grey by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180H-2 Compact Magnetic Mini-Stirrers, 230V, Grey by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180I-1 Compact Magnetic Mini-Stirrers, 115V, Ivory by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI180I-2 Compact Magnetic Mini-Stirrers, 230V, Ivory by Hanna Instruments

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.

Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.

HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Order Information:

All models are supplied with micro stir bar and instructions

HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)

HI190M-0 Mini Magnetic Stirrer with Speedsafe by Hanna Instruments

The HI 190M-0 is compact and lightweight, so that lack of laboratory bench space is no longer a concern.

This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.

HI 190M-0 comes supplied with an ABS cover that will resist the harmful effects of chemicals that are accidentally spilled.

• Compact size - The compact size of this stirrer allows users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The ABS housing of HI 190 M-0 resists most harmful chemicals in the lab.

Order Information:

HI 190M-0 mini-stirrer with ABS cover, 12 Vdc is supplied with micro stir bar and instructions.

HI190M-1 Mini Magnetic Stirrer with Speedsafe, 115V by Hanna Instruments

The HI 190M is compact and lightweight, so that lack of laboratory bench space is no longer a concern.

This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.

HI 190M comes supplied with an ABS cover that will resist the harmful effects of chemicals that are accidentally spilled.

• Compact size - The compact size of these stirrers allow users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The ABS housing of HI 190 M resists most harmful chemicals in the lab.

Order Information:

HI 190M mini-stirrer with ABS cover, is supplied with micro stir bar and instructions.

HI190M-2 Mini Magnetic Stirrer with Speedsafe, 230V by Hanna Instruments

The HI 190M is compact and lightweight, so that lack of laboratory bench space is no longer a concern.

This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.

HI 190M comes supplied with an ABS cover that will resist the harmful effects of chemicals that are accidentally spilled.

• Compact size - The compact size of these stirrers allow users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The ABS housing of HI 190 M resists most harmful chemicals in the lab.

Order Information:

HI 190M mini-stirrer with ABS cover, is supplied with micro stir bar and instructions.

HI200M-1 Mini Magnetic Stirrer with Speedsafe with Stainless Steel Cover, 115V by Hanna Instruments

The HI 200M is compact and lightweight, so that lack of laboratory bench space is no longer a concern.

This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.

HI 200M has an AISI 316 stainless steel cover. This model is ideal for applications that create exothermic reactions.

• Compact size - The compact size of this stirrer allows users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The stainless steel of HI 200M resists most harmful chemicals in the lab.

Order Information:

HI 200M mini-stirrer with stainless steel cover, is supplied with micro stir bar and instructions.

HI200M-2 Mini Magnetic Stirrer with Speedsafe with Stainless Steel Cover, 230V by Hanna Instruments

The HI 200M is compact and lightweight, so that lack of laboratory bench space is no longer a concern.

This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.

HI 200M has an AISI 316 stainless steel cover. This model is ideal for applications that create exothermic reactions.

• Compact size - The compact size of this stirrer allows users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The stainless steel of HI 200M resists most harmful chemicals in the lab.

Order Information:

HI 200M mini-stirrer with stainless steel cover, is supplied with micro stir bar and instructions.

HI300N-1 Heavy-Duty Magnetic Stirrer with 2.5 Liter Capacity, 115V by Hanna Instruments

HI 300N is a heavy-duty stirrer. HI 300N can stir up to 2.5 liters (0.66 gallons) of liquid. This makes it perfect for laboratory use as well as use in production. Electronic controls are incorporated into this stirrer that allows the user to regulate the speed with greater precision. With HANNA’s Speedsafe™, a limiter will assure that the maximum speed will never be exceeded.

Order Information:

The HI 300N magnetic stirrer, stainless steel cover, is supplied with micro stir bar and instructions.

HI300N-2 Heavy-Duty Magnetic Stirrer with 2.5 Liter Capacity, 230V by Hanna Instruments

HI 300N is a heavy-duty stirrer. HI 300N can stir up to 2.5 liters (0.66 gallons) of liquid. This makes it perfect for laboratory use as well as use in production. Electronic controls are incorporated into this stirrer that allows the user to regulate the speed with greater precision. With HANNA’s Speedsafe™, a limiter will assure that the maximum speed will never be exceeded.

Order Information:

The HI 300N magnetic stirrer, stainless steel cover, is supplied with micro stir bar and instructions.

HI310N-1 Heavy-Duty Magnetic Stirrer with 5 Liter Capacity, 115V by Hanna Instruments

HI 310N is a heavy-duty stirrer. HI 310N can stir up to 5.0 liters (1.3 gallons). This makes it perfect for laboratory use as well as use in production. Electronic controls are incorporated into this stirrer that allows the user to regulate the speed with greater precision. With HANNA’s Speedsafe™, a limiter will assure that the maximum speed will never be exceeded.

HI 310N also has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level (fluid weight) increases or decreases, the circuitry will adjust the output power to keep the speed constant.

Order Information:

The HI 310N magnetic stirrer, stainless steel cover, is supplied with micro stir bar and instructions.

HI310N-2 Heavy-Duty Magnetic Stirrer with 5 Liter Capacity, 230V by Hanna Instruments

HI 310N is a heavy-duty stirrer. HI 310N can stir up to 5.0 liters (1.3 gallons). This makes it perfect for laboratory use as well as use in production. Electronic controls are incorporated into this stirrer that allows the user to regulate the speed with greater precision. With HANNA’s Speedsafe™, a limiter will assure that the maximum speed will never be exceeded.

HI 310N also has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level (fluid weight) increases or decreases, the circuitry will adjust the output power to keep the speed constant.

Order Information:

The HI 310N magnetic stirrer, stainless steel cover, is supplied with micro stir bar and instructions.

HI301N-1 Two-Speed Magnetic Stirrer with 2.5 Liter Capacity, 115V by Hanna Instruments

HI 301N is a heavy-duty stirrer that offers dual range precision. HI 301N can stir up to 2.5 liters (0.66 gallons) of liquid.

Similar to the "ZOOM" function of a microscope, this stirrer allows access to two separate stirring ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory, as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:

The HI 301N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI301N-2 Two-Speed Magnetic Stirrer with 2.5 Liter Capacity, 230V by Hanna Instruments

HI 301N is a heavy-duty stirrer that offers dual range precision. HI 301N can stir up to 2.5 liters (0.66 gallons) of liquid.

Similar to the "ZOOM" function of a microscope, this stirrer allows access to two separate stirring ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory, as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:

The HI 301N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI311N-1 Two-Speed Magnetic Stirrer with 5 Liter Capacity, 115V by Hanna Instruments

HI 311N is a heavy-duty stirrer that offers dual range precision. HI 311N can stir up to 5.0 liters (1.3 gallons).

Similar to the "ZOOM" function of a microscope, this stirrer allows access to two separate stirring ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory, as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

HI 311N also has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level (fluid weight) increases or decreases, the circuitry will adjust the output power.

Order Information:

The HI 311N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI311N-2 Two-Speed Magnetic Stirrer with 5 Liter Capacity, 230V by Hanna Instruments

HI 311N is a heavy-duty stirrer that offers dual range precision. HI 311N can stir up to 5.0 liters (1.3 gallons).

Similar to the "ZOOM" function of a microscope, this stirrer allows access to two separate stirring ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory, as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

HI 311N also has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level (fluid weight) increases or decreases, the circuitry will adjust the output power.

Order Information:

The HI 311N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI302N-1 Auto-Reverse Magnetic Stirrer with 2.5 Liter Capacity, 115V by Hanna Instruments

HI 302N is a powerful stirrer that stirs up to 2.5 liters (0.66 gallons). It is often desirable to stir your samples in two directions. This will achieve maximum homogeneity and solubility. An advanced circuit allows HI 302N to reverse the direction of the stirring at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded.

HANNA stirrers incorporate a VCO device that stops the motor from accelerating as soon a load is removed (Speedsafe™).

Order Information:

The HI 302N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI302N-2 Auto-Reverse Magnetic Stirrer with 2.5 Liter Capacity, 230V by Hanna Instruments

HI 302N is a powerful stirrer that stirs up to 2.5 liters (0.66 gallons). It is often desirable to stir your samples in two directions. This will achieve maximum homogeneity and solubility. An advanced circuit allows HI 302N to reverse the direction of the stirring at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded.

HANNA stirrers incorporate a VCO device that stops the motor from accelerating as soon a load is removed (Speedsafe™).

Order Information:

The HI 302N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI312N-1 Auto-Reverse Magnetic Stirrer with 5 Liter Capacity, 115V by Hanna Instruments

HI 312N is a powerful stirrer that stirs up to 5.0 liters (1.3 gallons). It is often desirable to stir your samples in two directions. This will achieve maximum homogeneity and solubility. An advanced circuit allows HI 312N to reverse the direction of the stirring at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded.

HANNA stirrers incorporate a VCO device that stops the motor from accelerating as soon a load is removed (Speedsafe™). In addition to this feature, HI 312N also has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level (fluid weight) increases or decreases, the circuitry will adjust the output power.

Order Information:

The HI 312N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI312N-2 Auto-Reverse Magnetic Stirrer with 5 Liter Capacity, 230V by Hanna Instruments

HI 312N is a powerful stirrer that stirs up to 5.0 liters (1.3 gallons). It is often desirable to stir your samples in two directions. This will achieve maximum homogeneity and solubility. An advanced circuit allows HI 312N to reverse the direction of the stirring at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded.

HANNA stirrers incorporate a VCO device that stops the motor from accelerating as soon a load is removed (Speedsafe™). In addition to this feature, HI 312N also has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level (fluid weight) increases or decreases, the circuitry will adjust the output power.

Order Information:

The HI 312N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI303N-1 Two-Speed Magnetic Stirrer with Tachometer, 115V by Hanna Instruments

QC stations and labs must be able to repeat tests and processes. In order to do this, the specifications must be clear at all times. When stirring a solution, the RPMs are a very crucial factor. Without a tachometer, there is no way of knowing the exact RPMs and therefore no way of repeating the process. The HI 303N solves this problem by incorporating an LCD tachometer. These stirrers also allow precise stirring repeatability by using two separate ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:

The HI 303N magnetic stirrer, stainless steel cover, micro stir bar and instructions.

HI303N-2 Two-Speed Magnetic Stirrer with Tachometer, 230V by Hanna Instruments

QC stations and labs must be able to repeat tests and processes. In order to do this, the specifications must be clear at all times. When stirring a solution, the RPMs are a very crucial factor. Without a tachometer, there is no way of knowing the exact RPMs and therefore no way of repeating the process. The HI 303N solves this problem by incorporating an LCD tachometer. These stirrers also allow precise stirring repeatability by using two separate ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:

The HI 303N magnetic stirrer, stainless steel cover, micro stir bar and instructions.

HI304N-1 Auto-Reverse Magnetic Stirrer with Tachometer, 115V by Hanna Instruments

When stirring a solution, to work with a constant speed is an important factor in ensuring that the best repeatability in tests and processes is achieved. Without a tachometer, there is no way of knowing the RPMs.

HI 304N is a heavy-duty stirrer with a built-in tachometer. It is often desirable to stir in two directions in order to achieve maximum homogeneity. An advanced circuit allows HI 304N to reverse the direction of the stir at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded (Speedsafe™). Often, a sample is removed from the stirrer before the uses reduces the speed with ordinary stirrers. This can cause the motor to accelerate until it is destroyed. HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:

The HI 304N magnetic stirrer, stainless steel cover, micro stir bar and instructions.

HI304N-2 Auto-Reverse Magnetic Stirrer with Tachometer, 230V by Hanna Instruments

When stirring a solution, to work with a constant speed is an important factor in ensuring that the best repeatability in tests and processes is achieved. Without a tachometer, there is no way of knowing the RPMs.

HI 304N is a heavy-duty stirrer with a built-in tachometer. It is often desirable to stir in two directions in order to achieve maximum homogeneity. An advanced circuit allows HI 304N to reverse the direction of the stir at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded (Speedsafe™). Often, a sample is removed from the stirrer before the uses reduces the speed with ordinary stirrers. This can cause the motor to accelerate until it is destroyed. HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:

The HI 304N magnetic stirrer, stainless steel cover, micro stir bar and instructions.

HI322N-1 Timer Controlled Magnetic Stirrer, 115V by Hanna Instruments

HI 322N is a heavy duty stirrer that incorporates a timer control that will turn the motor off after a selected amount of time. The time is adjustable from 5 minutes to 2 hours. This feature allows the user to carry out other tasks without worrying about over or under stirring. HI 322N can stir up to 5.0 liters (1.3 gallons), making them ideal for laboratory and production use.

This stirrer allows regulated speed control. A limiter will assure the maximum speed is never exceeded (Speedsafe™), and a VCO device stops motor acceleration as soon as a load is removed.

HI 322N has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level increases or decreases, the circuitry will adjust the output power.

Order Information:

The HI 322N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI322N-2 Timer Controlled Magnetic Stirrer, 230V by Hanna Instruments

HI 322N is a heavy duty stirrer that incorporates a timer control that will turn the motor off after a selected amount of time. The time is adjustable from 5 minutes to 2 hours. This feature allows the user to carry out other tasks without worrying about over or under stirring. HI 322N can stir up to 5.0 liters (1.3 gallons), making them ideal for laboratory and production use.

This stirrer allows regulated speed control. A limiter will assure the maximum speed is never exceeded (Speedsafe™), and a VCO device stops motor acceleration as soon as a load is removed.

HI 322N has an automatic feedback feature. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level increases or decreases, the circuitry will adjust the output power.

Order Information:

The HI 322N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI324N-1 Timer Controlled Magnetic Stirrer with Tachometer, 115V by Hanna Instruments

HI 324N is a heavy duty stirrer that incorporate a timer control that will turn the motor off after a selected amount of time. The time is adjustable from 5 minutes to 2 hours. This feature allows the user to carry out other tasks without worrying about over or under stirring. HI 324N can stir up to 5.0 liters (1.3 gallons), making it ideal for laboratory and production use.

This stirrer allows regulated speed control. A limiter will assure the maximum speed is never exceeded (Speedsafe™), and a VCO device stops motor acceleration as soon as a load is removed.

HI 324N has an automatic feedback feature, also incorporating an LCD tachometer. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level increases or decreases, the circuitry will adjust the output power. The HI 324N’s RPM display guarantees repeatability in QC tests and research by constantly displaying the RPMs.

Order Information:

The HI 324N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.

HI324N-2 Timer Controlled Magnetic Stirrer with Tachometer, 230V by Hanna Instruments

HI 324N is a heavy duty stirrer that incorporate a timer control that will turn the motor off after a selected amount of time. The time is adjustable from 5 minutes to 2 hours. This feature allows the user to carry out other tasks without worrying about over or under stirring. HI 324N can stir up to 5.0 liters (1.3 gallons), making it ideal for laboratory and production use.

This stirrer allows regulated speed control. A limiter will assure the maximum speed is never exceeded (Speedsafe™), and a VCO device stops motor acceleration as soon as a load is removed.

HI 324N has an automatic feedback feature, also incorporating an LCD tachometer. The motor is electronically controlled to maintain the chosen speed as the load changes. If the viscosity or the level increases or decreases, the circuitry will adjust the output power. The HI 324N’s RPM display guarantees repeatability in QC tests and research by constantly displaying the RPMs.

Order Information:

The HI 324N magnetic stirrer, stainless steel cover, is supplied with magnetic stir bar and instructions.