- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Fieldpiece Job Link Probe-Pipe Clamp - JL3PC
Item #:
FP-JL3PC
Brand:
Fieldpiece
Share this product:
JL3PC Job Link Probe-Pipe Clamp by Fieldpiece
The JL3PC pipe temperature wireless clamps feature patent pending Rapid Rail™ Sensor Technology that uses electrically conductive pipe to complete the circuit so readings stabilize in 3 seconds and are not affected by ambient air. One beep with a slow green blinking light indicates a closed circuit. If the pipe is corroded the circuit will be open and will not read temperature. The clamp will indicate the open loop with a double beep and rapid blinking light. Simply clean the pipe to enable the circuit to be closed and allow fast readings with +/- 1° F accuracy.
- The JL3PC uses electrically conductive pipe to complete the circuit so readings are not affected by ambient air
- 3 second stabilization with ±1°F accuracy
- LED and beeper indicate when the thermocouple circuit is closed and accurate
- Narrow jaw size gets into tight spaces or irregularly shaped pipes
Wireless Range | 350 feet (107 meters) line of sight Obstructions affect distance |
Wireless Frequency | 2.4 GHz |
Battery | 2 x AAA (included) |
Battery Life | 150 hrs typical alkaline |
Auto Power Off (APO) | 2 hrs (can be disabled) |
Minimum Device Requirement | BLE 4.0 devices running iOS® 7.0 or Android™ 5.0 |
Best Accuracy | ±1°F (±0.6°C) |
Measurement Range | -50°F to 257°F (-46°C to 125°C) |
Pipe Compatibility | Electrically conductive 1/4” to 1 3/8” dia. (6.4mm to 34.9mm) dia. |
Stabilization Time | 3 seconds typical |
Water Resistance | Designed to IP55 |