- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Fieldpiece Large Pipe-Clamp Thermocouple 3/8" to 2/14" for Air Conditioning - ATC2
Item #:
FP-ATC2
Brand:
Fieldpiece
Share this product:
ATC2 Large Pipe-Clamp Thermocouple 3/8" to 2/14" for Air Conditioning by Fieldpiece
The ATC2, K-type, pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 3/8" to 2 1/4" jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC2 for most A/C units. The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces. The sensor reaches correct temperature within a minute.
ATC2 jaw range | 3/8" to 2 1/4" pipe diameter (outside diameter) |
Accuracy | ± 4ºF (2°C) ; ±1°F (0.5°C) after field calibration, 32 to 176ºF (0 to 80°C) |
Temperature range | -50 to 180ºF (-46 to 82°C) |
Thermocouple conductors | K-type nickel chromium/nickel aluminum. |
Probe insulation and clamp material | Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 180°F (82°C). |
Plug | K-type thermocouple male mini plug. |
Typical stabilization time | less than 60 seconds. |