- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
RKI Instruments FP-330 Paper Tape Machine for Formaldehyde - FP-330
Item #:
FP-330
Brand:
RKI Instruments
Share this product:
RKI Instruments Replacement Model FP-330 Paper Tape Machine for Formaldehyde
FP-330 Paper Tape Machine for Formaldehyde by RKI Instruments
RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free gas detection. The FP-330 is equipped with an easily replaceable tape that is highly specific to Formaldehyde. This model is equipped with a digital display showing the type of gas and concentration in PPM. The FP-330 will also display remaining tape life as well as an end of tape alarm.
The FP-330 has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique “Tape Saver mode" extends tape life in applications where high background gas levels may be present.
The FP-330 meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments.
Features:
- Small and compact
- Highly sensitive and ideal for low level formaldehyde concentrations
- Interference-free detection
- Easy detection tape replacement with plug-in cassette
- Tape remainder display and tape end warning alarm provided
- PPM digital display
- Easily transportable
- 115 VAC powered
- Alarm relays
- 4-20mA output
Applications:
- Furniture and woodworking
- Coating and varnishing
- Engineered wood products
- Medical / veterinary
- Painting & corrosion resistant finishes
- Carpet manufacture & storage
- Adhesives
- Heat treatment operations
- Manufactured homes/trailer/RV inspection
*Please note we can only ship RKI products to customers within the United States
Model | FP-330 HCHO 0 - 0.500 ppm | FP-330 HCHO 0 - 1.00 ppm | FP-330 HCHO 0 - 5.00 ppm |
Detection principle | Photoelectric photometry method using tape cassette |
||
Detection tape | Plug in cassette, 65-FCL-018 |
||
Detection gas | Formaldehyde (HCHO) |
||
Detection range | 0.030 to 0.500 ppm |
0.05 to 1.00 ppm |
0.3 to 5.00 ppm |
Alarm point | 1st 0.080 ppm, 2nd 0.300 ppm |
1st 0.17 ppm, 2nd, 0.33 ppm |
1st 0.8 ppm, 2nd 1.7 ppm |
Alarm operation | Latching alarm (standard) or non-latching (option) Lamp : Caution = Yellow, Alarm = Red, with buzzer |
||
Zero suppression | 0.030 ppm |
0.05 ppm |
0.3 ppm |
Measuring cycle | 1800 seconds (30 minutes) |
600 seconds (10 minutes) |
180 seconds (3 minutes) |
Resolution | 0.005ppm |
0.01 ppm |
0.1 ppm |
Flow rate | 450ml/min. (nominal) |
||
Max. tubing length | 2m (teflon only) |
||
Accuracy | ±20% of indication value + 1 digit |
||
Tape operation time | 1 month with no background gas |
||
Alarm Indication | Warning and alarm with audible and visual indications |
||
Self-diagnosis | Low flow, tape cut, sensor failure, etc. |
||
External output signal | 4-20mA (load resistance: below 300 Ω) |
||
Operating temperature & humidity | 5~35°C 20~60% RH (non condensing) |
||
Gas inlet/outlet | OD 6mm with fittings |
||
Power supply & power | 100VAC to 220VAC universal power, ±10% |
||
Dimensions & weight | Approx. 6.5"(W) x 7.8"(H) x 10.4"(D) Approx. 12.125lb 164 (W) x 198 (H) x 263 (D) mm, 6.5kg approx. |