Platinum Premier Packages

1 YW-PREM-320-T420 2 Year Warranty for FLIR T420, T420bx 320 x 240 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

2 YW-PREM-320-T420 2 & 3 Years Warranty for FLIR T420, T420bx 320 x 240 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

3 YW-PREM-320-T420 2, 3 & 4 Years Warranty for FLIR T420, T420bx 320 x 240 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

1 YW-PREM-320-T440 2 Year Warranty for FLIR T440, T440bx 320 x 240 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

2 YW-PREM-320-T440 2 & 3 Years Warranty for FLIR T440, T440bx 320 x 240 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

3 YW-PREM-320-T440 2, 3 & 4 Years Warranty for FLIR T440, T440bx 320 x 240 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

1 YW-PREM-480 2 Year Warranty for FLIR T600, T600bx 480 x 360 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

2 YW-PREM-480 2 & 3 Years Warranty for FLIR T600, T600bx 480 x 360 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

3 YW-PREM-480 2, 3 & 4 Years Warranty for FLIR T600, T600bx 480 x 360 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

1 YW-PREM-640-T620 2 Year Warranty for FLIR T620, T620bx 640 x 480 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

2 YW-PREM-640-T620 2 & 3 Years Warranty for FLIR T620, T620bx 640 x 480 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

3 YW-PREM-640-T620 2, 3 & 4 Years Warranty for FLIR T620, T620bx 640 x 480 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

1 YW-PREM-640-T640 2 Year Warranty for FLIR T640, T640bx 640 x 480 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

2 YW-PREM-640-T640 2 & 3 Years Warranty for FLIR T640, T640bx 640 x 480 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

3 YW-PREM-640-T640 2, 3 & 4 Years Warranty for FLIR T640, T640bx 640 x 480 Camera by FLIR

This package combines both the General Maintenance and Gold Plus Packages, and adds priority service, which in most cases results in only a few days lead-time. This package includes the complete, 14-Point Inspection & Calibration Program, as well as the full hardware and/or camera software repair service of the Gold Plus Package. It includes parts and labor not included under the General Maintenance Package – all at a very affordable price.

Gold Plus (Extended Warranty) Package

The Extended Warranty Package covers parts and labor for your IR camera. This can be a valuable service, should your camera encounter hardware or software issues. The Extended Warranty Package must be purchased before the end of the warranty period. It provides coverage even if your camera is used continuously in 24/7 operations.

General Maintenance Package

The General Maintenance Package offers the complete, hi-tech 14 Point Inspection & Calibration program. This package does not cover material or labor. Bottom line, when you compare the cost of your IR camera to the cost of annual maintenance and calibration, it is well worth the money.

14-Point Inspection & Calibration Program

FLIR's exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

• Perform a complete operational check
• Fusion calibration and laser alignment, when applicable
• Verify all internal cable and PCB connections
• Clean viewfinder and check optics
• Upgrade internal camera software to latest revisions
• Perform minor repairs
• Verify and/or re-equalize as needed each temperature range for image uniformity
• Verify standard lens calibration (others or special engineered lenses, optional)
• Verify ambient temperature compensation as needed
• Re-calibration to ensure it meets factory specification
• Calibrate temperature ranges up to +1,500°C, when applicable
• Perform quality approved acceptance test procedure
• Provide calibration label with next due date
• Provide calibration certificate (optional, extended calibration certificate with measured values)

FLIR T420/T420bx Platinum Premier Package - Year 2

FLIR T420/T420bx Platinum Premier Package - Years 2 & 3

FLIRT420/T420bx Platinum Premier Package - Years 2, 3 & 4

FLIR T460 Platinum Premier Package - Year 2

FLIR T460 Platinum Premier Package - Years 2 & 3

FLIR T460 Platinum Premier Package - Years 2, 3 & 4

FLIR T460 Platinum Premier Package - Year 2

FLIR T460 Platinum Premier Package - Years 2 & 3

FLIR T460 Platinum Premier Package - Years 2, 3 & 4

FLIR T600, T600bx Platinum Premier Package - Year 2

FLIR T600, T600bx Platinum Premier Package - Years 2 & 3

FLIR T600, T600bx Platinum Premier Package - Years 2, 3 & 4

FLIR T620, T620bx Platinum Premier Package - Year 2

FLIR T620, T620bx Platinum Premier Package - Years 2 & 3

FLIR T620, T620bx Platinum Premier Package - Years 2, 3 & 4

FLIR T640, T640bx Platinum Premier Package - Year 2

FLIR T640, T640bx Platinum Premier Package - Years 2 & 3

FLIR T640, T640bx Platinum Premier Package - Years 2, 3 & 4

FLIR T660 Platinum Premier Package - Year 2

FLIR T660 Platinum Premier Package - Years 2 & 3

FLIR T660 Platinum Premier Package - Years 2, 3 & 4

FLIR T1020 Platinum Premier Package - Year 2

FLIR T020 Platinum Premier Package - Years 2 & 3

FLIR T1020 Platinum Premier Package - Years 2, 3 & 4