- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech EX210 8 Function Mini Digital MultiMeter with IR Thermometer and NIST
Item #:
EXT-EX210-NIST
Brand:
Extech
Share this product:
EX210 8 Function Mini Digital MultiMeter with IR Thermometer and NIST by Extech
Features
- Built-in IR Thermometer with laser pointer for locating hot spots
- 4:1 Distance to Target Ratio
- 2000 count large backlit dual LCD with easy-to read digits
- Low current capability measure down to 0.1μA
- Max Hold
- Input fuse protection
- Auto power off and Data Hold
- Complete with test leads and 9V battery
Enclosure | Double molded |
Diode Test | Test current of 0.9mA maximum, open circuit voltage 2.8V DC typical |
Continuity | Threshold 20 to 50Ω, test current <1.5mA |
Input Impedance | 10MΩ VDC/VAC |
AC Response | Average responding |
ACV Bandwidth | 40Hz to 1000Hz |
IR Spectral response | 6 to 16µm |
IR Emissivity | 0.95 fixed |
IR distance ratio | 4:1 |
Laser pointer | Class 2 laser < 1mW power; Wavelength is 630 to 670nm |
Display | 2,000 count backlit liquid crystal display |
Overrange indication | "OL" is displayed |
Auto Power Off | 15 minutes (approximately) |
Polarity | Automatic (no indication for positive); Minus (-) sign for negative |
Measurement Rate | 2 times per second, nominal |
Battery | One 9 volt (NEDA 1604) battery |
Fuses | mA, µA ranges; 200mA 250V ceramic fast blow A range; 10A 600V ceramic fast blow |
Operating Temperature | -10°C to 40°C (14°F to 122°F) |
Storage Temperature | -10°C to 60°C (14°F to 140°F) |
Operating Humidity | Max 80% up to 31°C (87°F) decreasing linearly to 50% at 40°C (104°F) |
Storage Humidity | <80% |
Operating Altitude | 2000 meters (7000 ft) maximum |
Weight | 260 g (9.17oz) |
Size | 147x76x42 mm (5.8x2.9x1.6") |
Safety | This meter is intended for origin of installation use and provides user protection through double insulation per IEC/EN 61010- 1:2001 and IEC/EN 61010-031:2002 to Category III 600V; Pollution Degree 2. |
Approvals | CE |
Function |
Range |
Resolution |
Accuracy |
DC Voltage |
200 mV |
0.1 mV |
±(0.8% reading + 6 digits) |
2V |
0.001V |
±(0.5% reading + 2 digits) |
|
20V |
0.01V |
||
200V |
0.1V |
±(0.8% reading + 2 digits) |
|
600V |
1V |
||
AC Voltage |
200 mV |
0.1 mV |
±(1.0% rdg + 6 digits) |
2V |
0.001V |
||
20V |
0.01V |
||
200V |
0.1V |
||
600V |
1V |
||
All AC voltage ranges are specified from 5% of range to 100% of range |
|||
DC Current |
200 μA |
0.1 μA |
±(1.5% reading + 5 digits) |
2000 μA |
1 μA |
||
20 mA |
0.01 mA |
||
200 mA |
0.1 mA |
||
2.000 |
0.001 A |
±(2.5% reading + 5 digits) |
|
10 A |
0.01 A |
||
Note:10A for 30 sec max |
|||
AC Current |
200 μA |
0.1 μA |
±(1.5% rdg + 5 digits) |
2000 μA |
1 μA |
||
20 mA |
0.01 mA |
||
200 mA |
0.1 mA |
||
2.000 |
0.001 A |
±(3.0% reading + 5 digits) |
|
10 A |
0.01 A |
||
Note: 10A for 30 sec max |
|||
Resistance |
200 Ω |
0.1 Ω |
±(0.8% reading + 5 digits) |
2 kΩ |
0.001 kΩ |
±(0.8% reading + 2 digits) |
|
20 kΩ |
0.01 kΩ |
||
200 kΩ |
0.1 kΩ |
||
2 MΩ |
0.001 MΩ |
±(2.5% reading + 8 digits) |
|
20 MΩ |
0.01 MΩ |
||
Temperature IR |
-20 to 0°C |
0.1°C/°F |
±4°C |
0 to 93°C |
±(2.0%rdg or 2°C) |
||
93 to 230 |
±(3.0%rdg or 3°C) |
||
-5 to 32°F |
± 8°F |
||
32 to 200°F |
±(2.0%rdg or 4°F) |
||
200 to 446°F |
±(3.0%rdg or 6°F) |