- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech Indoor Carbon Monoxide and Carbon Dioxide (CO2) Datalogging Meter - CO260
Item #:
EXT-CO260
Brand:
Extech
Share this product:
CO260 Indoor Carbon Monoxide and Carbon Dioxide (CO2) Datalogging Meter by Extech
The Extech CO260 monitors indoor air quality for Carbon Monoxide (CO) and Carbon Dioxide (CO2) levels. In high concentrations these gases can affect the health and well-being of people and pets. Monitor CO2 levels in schools, office buildings, greenhouses, factories, hotels, hospitals, transportation lines and anywhere that high levels of carbon dioxide are generated. Common areas to monitor CO levels include boiler rooms, warehouses that use propane and gasoline-powered for lifts, boats, planes, RVs, and manufacturing plants. The CO260 also measures air temperature/relative humidity and calculates dew point/wet bulb temperatures. It can datalog manually up to 99 readings with internal memory or continously up to 32K readings with included software.
Features
- Manually step through readings of CO, CO2, Dew Point, Wet Bulb, Air Temperature, and Relative Humidity on large backlit LCD with real time clock
- Built-in maintenance free NDIR (non-dispersive infrared) CO2 sensor
- Programmable CO warning level with audible alarm
- Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
- Pressure compensation adjustment for measuring CO2 at altitudes other than sea level
- Manually store/recall 99 readings
- Continuous datalogging up to 32K readings
- USB interface with PC software for further data analysis
- Min/Max and Data Hold
- Auto power off with disable
- Complete with 4 AA batteries, USB cable, PC software and hard case
- Optional 33% and 75% RH calibration bottles (RH300-CAL)
Specifications | Range | Resolution | Basic Accuracy |
Carbon Monoxide (CO) | 0 to 1,000ppm | 1ppm | ±10ppm<100ppm, ±10% 101-500ppm, ±20%>500ppm |
Carbon Dioxide (CO2) | 0 to 9,999ppm | 1ppm | ±30ppm+5%reading |
Temperature | -5 to 140°F (-20 to 60°C) | 0.1° | ±1°F/0.6°C |
Humidity | 0.1 to 99.9%RH | 0.1% | ±3%RH |
Wet Bulb | 23 to 140°F (-5 to 59.9°C) | 0.1° | Calculated |
Dew Point | -4 to 140°F (-20 to 59.9°C) | 0.1° | Calculated |
Dimensions/ Weight | 7.9 x 2.7 x 2.3" (200 x 70 x 57mm)/ 6.7 oz (190g) |