- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech AN100 CFM/CMM Mini Thermo-Anemometer
Item #:
EXT-AN100
Brand:
Extech
Share this product:
AN100 CFM/CMM Mini Thermo-Anemometer by Extech
Features
- Model AN100 - CFM/CMM Thermo-Anemometer
- Model AN200 - CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with an 8:1 distance-to-spot ratio and Laser Pointer
- Simultaneous display of Ambient Temperature and Air Flow or Air Velocity
- Up to 8 easy to set Area dimensions (ft 2 or cm2) are stored in the meter's internal memory
- 20 point average function for Air Flow
- Super large LCD Backlit Display
- 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Data Hold and MIN/MAX
- Auto Power off
- Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, protective rubber holster, and carrying case
Applications
- HVAC installation, repair, diagnostics, and optimization.
- Fume hood testing, installation, and verification
- Ventilation system installation, servicing, and analysis
- Environmental wind and temperature testing/analysis
- Boiler rooms
- Ionizer flow output monitoring
- Automobile aerodynamic testing
- Plant/Facilities Maintenance
Circuit | Custom LSI microprocessor circuit |
Display | Dual function 0.5" (13 mm) 4‐digit LCD |
Sampling rate | 1 reading per second approx. |
Sensors | Air velocity/flow sensor: Conventional angled vane arms with low
friction ball bearing Temperature sensor: NTC‐type precision thermistor |
Automatic Power off | Auto shut off after 20 minutes to preserve battery life |
Operating Temperature | 32°F to 122°F (0°C to 50°C) |
Storage Temperature | 14 to 140° F (‐10 to 60° C) |
Operating Humidity | <80% RH |
Storage Humidity | <80% RH |
Operating Altitude | 7000ft (2000 meters) maximum |
Battery | One 9 volt (NEDA 1604) battery |
Battery life | 80 hours approx. (if the Backlight is used continuously, battery life will be reduced significantly) |
Power Consumption | 8.3 mA DC approx |
Weight | 1.6 lbs (725g) including battery & probe |
Dimensions | Main instrument: 7.0 x 2.9 x1.2" (178 x 74 x 33mm) Sensor Head: 2.75" (70mm) Diameter |
Air Velocity | |
m/s (meters per sec) | Range: 0.40 ‐ 30.00 m/s Resolution: 0.01 m/s Accuracy: ± (3%rdg + 0.20 m/s) |
km/h (kilometers/hour) | Range: 1.4 ‐ 108.0 km/h Resolution: 0.1 km/h Accuracy: ± (3%rdg + 0.8 km/hr) |
ft/min (feet per minute) | Range: 80 – 5900 ft/min Resolution: 1 ft/min Accuracy: ± (3%rdg + 40 ft/m) |
mph (miles per hour) | Range: 0.9 – 67.0 mph Resolution: 0.1 mph Accuracy: ± (3%rdg + 0.4 MPH) |
knots (nautical MPH) | Range: 0.8 to 58.0 knots Resolution: 0.1 knots Accuracy: ± (3%rdg + 0.4 knots) |
Air Flow | |
CMM (cubic meters/min) | Range: 0‐9999 m3/min Resolution: 1 Area: 0 to 9.999m2 |
CFM (cubic ft/min) | Range: 0‐9999 ft3/min Resolution: 1 Area: 0 to 9.999ft2 |
Air Temperature | Range: 14 ‐ 140° F (‐10 ‐ 60° C) Resolution: 0.1°F/C Accuracy: 4.0°F (2.0°C) |