- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech 407736 Dual Range Sound Level Meter with NIST
Item #:
EXT-407736-NIST
Brand:
Extech
Share this product:
407736 Dual Range Sound Level Meter with NIST by Extech
Features
- A and C weighting
- High and Low measuring ranges: Model 407735 - Low (35 to 100dB), High (65 to 130dB); Model 407736 - Low (35 to 90dB), High (75 to 130dB)
- 0.1dB resolution
- Fast/slow response
- Max Hold with reset button
- Model 407736 meets ANSI and IEC 651 Type II standards
- Large 0.5" 3-1/2 digit LCD display
- Built-in calibration check (94dB)
- Tripod mount and analog DC/AC conditioned outputs of 10mV/dB
- Utilizes 0.49"(12.3mm) condenser microphone
- Dimensions: 9.5 x 2.7 x 1" (241 x 69 x 25mm) Weight: 7.6 oz (215g)
- Complete with hard vinyl case and 9V battery
Display | 3-1/2 digit (2000 count) LCD |
Display update rate | 0.5 seconds |
Microphone | 0.5" Electret condensor |
Measurement Bandwidth | 31.5Hz to 8KHz |
Dynamic range | 55dB |
Measurement Range | 35 to 130dB (Low: 35 to 100; High: 65 to 130dB) |
Frequency weighting | 'A' and 'C' (selectable) |
Applicable standards | IEC-651 & ANSI S1.4 Type 2 |
Accuracy / Resolution | ± 1.5dB / 0.1dB |
Maximum Hold decay time | <1dB / 3min |
Response time | Fast: 125 milliseconds / Slow: 1 second |
Calibration source required | 1KHz internal sine wave @ 94dB signal is electrical and is injected after the microphone |
AC Analog output | 0.65VAC rms (full scale); 600Ω output impedance |
DC Analog output | 10mVDC / dB; 100Ω output impedance (approx). |
Power | 9V Battery |
Battery life | 50 hours (typical); Low battery indicator alerts user |
Operating temperature | 0 to 40°C (32 to 104°F) |
Operating humidity | 10 to 90% RH |
Dimensions/weight | 240 x 68 x 25mm (9.45 x 2.68 x 1”)/ 210g (6.75oz) |