BW Technologies IntelliDoX Docking Station for GasAlertMicroClip XL / X3

Greater performance with more options for your gas detecting equipment fleet

 

With IntelliDox systems, you enjoy the benefits of smart docking technology with your Fleet Manager II software program. Compatible units can easily be managed and tracked automatically, to increase overall efficiency.

Instrument management made easy

It won't take long to install the new IntelliDox smart docking system. In fact, the entire installation process takes a couple of minutes or less. Because each module can be operated separately (with separate operating systems, pumps, and readout screens) you can multi-task. For example, it is possible to bump test 2 detectors while you perform calibration on 3 detectors.

Flexibility at your fingertips

Many of the IntelliDox parameters are simple to set, including the high and low alarm set points. This ensures that your gas detectors will never let you down during their entire service lives.

Network and track your data efficiently and conveniently

With both Ethernet and USB options, you can easily store bump testing and peak exposure data.

• Maintenance free detectors - new customizing options
• Track workers and control set points for alarms
• Add on to your docking system (up to 5 modules total)
• Fast and simple setup

 

Compatibility

BW Clip Series
GasAlertMicroClip Series
ConneX1

Unmatched Bump Testing Performance

Thanks to FastBump, it takes very little time to take care of all bump testing compliance issues. Efficient and economical system saves on test gas and optimizes the entire process

IntelliDoX Features:

• Bump tests, configuration, calibrating, and record-keeping support for compatible units. These settings are user updatable: Schedule Calibration Reminders and Bump Tests; Update Firmware; Gas level Reading Display During Alarm; Event Logs Transfer; Alarm Settings; Enable/Disable Non-compliance Indicator; Hibernation; Preferences for Time Display
• Simple Ethernet network connecting
• Gang as many as 5 modules - each unit has keypad and LCD screen for independent use
• Best FastBump test in the industry. Saves on gas and eliminates bottleneck issues
• No tools needed for setup
• No need for network access to configure or transfer data, thanks to USB port
• Span calibration and bump tests is automatic

 

IntelliDoX Specs

Size (One module): 5.4 in (13.8 cm) width - 14.2 in (36.2 cm) height - 4.3 in (10.9 cm) depth
Power supply: 12 volt / 8.33A ITE Power Supply
Weight: 4.2 pounds (1.91 kg)
Real-time clock: Date & time stamp
Communications method: Detector and docking module have 2-way (infrared) communication capabilities

External interface

• Ethernet port - 1
• USB port - 1

 

Menu navigation

• Adjust display settings
• Adjust date & time
• Configure gas inlets
• Review IntelliDoX module
• Password protection (optional)
• Configure UI display language: English, German, Portuguese, Spanish, French

 

Automatic tests

• Standard bump test: takes 10 seconds
• Fastbumpump: takes 40 seconds

 

Data Storage: 2 GB internal storage capacity

Pump

• Independent pump for each IntelliDoX module
• Flow Rate is 350 ml/min

 

Instrument Management System: Fleet Manager II (4.0 and higher)

Ratings: This device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) Each device may not cause harmful interference, and (2) Each device must accept interference received (including any interference causing undesired operation).

Warranty: Full two years

 

Options and Accessories

Fully Portable Kit for IntelliDoX test station - comes with a Pelican case. Each kit contains: two docking modules, AC power adaptor, demand flow regulator, ethernet cable, tubing and more.

Multi-Inlet Key

You can configure a single IntelliDoX module to connect multiple calibration gases

A complete list of accessories and kits is available.

DUE TO PRODUCT IMPROVEMENT AND ONGOING RESEARCH, SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.

Part Number: DX-MCLP