- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Casella Logging Sound Level Meter Type 2 with Standard Accessories
Item #:
CEL-632-B2
Brand:
Casella
Share this product:
CEL-632-B2 Logging Sound Level Meter Type 2 with Standard Accessories by Casella
Noise measurements from complex sources require a complete knowledge of the variable noise climate over an extended period of time. The CEL-632 model is designed to satisfy this need by providing overall, periodic and profile time history recording to suit almost any industrial or environmental measurement requirement. A super wide 120 dB dynamic range means that the user does not need to worry about selecting scales as the meter will always be on the right range. The provision of all the popular frequency and time weightings simultaneously allow many different noise measurements to be taken by new and experienced users alike. The fullcolor, high-precision, graphic LCD enhances the user experience with this new meter.
Key Benefits
- Wide dynamic range from 20 to 140 dB on single span
- A, C and Z simultaneous frequency weightings
- Slow, Fast and Impulse rms. time responses
- Large 240 x 320 pixel color ¼ VGA graphic display
- Easy to use menu structure
- Optional data logging capability (model specific)
- Regular timed or event triggered recording possible (model specific)
- Available in ANSI/IEC class 1 and class 2 accuracy
- Available with real time octave & 1/3 octave band filters plus 3 broad band results A, C & Z
- Storage of all results simultaneously in a huge non-volatile memory
- Direct printing to portable printer for hard copy on site
Applications
The CEL-632 will be most suitable for measurements of noise levels as they vary with time. It provides all the required parameters for comprehensive OSHA, ACGIH workplace or environmental or similar noise studies. Time history information based on the Leq and max, min levels are best suited to describe the changing noise levels that can be present in the workplace or outdoors. The CEL-632 is designed to assist in the correct interpretation of these difficult noise climates. Regular periodic recording at fixed intervals from 1 sec to 1 hour is provided using a large 1 GB onboard memory chip. The changing noise intervals are stored together with the overall time average answer such as LDN, LDEN. Results are based on 24 hour overall intervals and can be linked in the Insight software into longer runs if needed. This enables the CEL-632 to correctly record changing noise levels and enables the user to visualize how the noise levels varied during the measurement. Full data logging and the measurement of the LN% values is available in the CEL-633 top of the line model. Additionally, octave and third octave band filters in the B and C versions can provide frequency analysis of tonal noises.Technical Specification - General | |
Accuracy | ANSI S1.4 & S1.43, IEC 61672-1 2002-5 |
Frequency filters comply with | ANSI S1.11 and IEC 61260 |
Microphone type | ½” Free field Electret microphone & preamplifier Type 1 or Type 2 on a removable CEL-495 preamplifier |
Reference Conditions | 68°F (20°C) air temperature 65% Relative Humidity 1013 mbar (101.325 kPa) atmospheric pressure |
Operating Temperature Range | 14 to 122°F (-10 to 50°C) (Class 1) 32 to 104°F (0 to 40°C) (Class 2) |
Effect of Humidity | Less than ±0.5dB over the range 30 to 90% RH (non-condensing), rel. to value at ref. conditions |
Operating pressure range | 650 to 1080 mbar (65 to 108 kPa) |
Batteries | 3 x AA Alkaline or NiMH rechargeable types |
Battery Life (hours) | Up to 12 hours without backlight |
Dimensions w x h x d (in/mm) | 2.8 x 10.5 x 1.2 in (71.5x 267.0x 31.0mm) including preamplifier and microphone |
Weight including batteries (oz/gm) | 10.1 oz (< 291g) |
Tripod socket for fixed measurements | Yes via standard camera thread (1/4” size) |
Operator controls | 8 buttons for power On/Off + 2 x context sensitive menu selection + 4 navigation + confirm selection |
Technical Specification – Performance | |
Total measurement range (dB) | 20 to 140 |
Dynamic range on single measurement span (dB) | 120 |
Noise floor (A weighted dB) | < 20 (Class 1), < 25 (Class 2) |
Frequency weightings | Simultaneous A, C & Z (unweighted) |
Time weightings | Simultaneous Slow, Fast and Impulse |
Amplitude weightings (Exchange rate) | Simultaneous Q=3, Q=4 and Q=5 dB |
Displayed parameters available as per user selected list or using pre-configured setups (depending on model) | Lp, Lmx, Lmn, Lpk Leq, LIeq, LDOD, Lavg, LAE, Ltm3, Ltm5 LDN, LDEN, CNEL, 5 x LN% |
Narrow band real time measurements | (B version) 11 octave bands 16 Hz to 16 kHz (C version) 33 third octave bands 12.5 Hz to 20 kHz with cursor readout plus A & C & Z broad band levels |
Display of octave and third octave band levels | Graphical spectrum including broad band values With listing of individual band levels in tabular format |
Measurements in octave (& 1/3) band mode include | Lmx and Leq with selected freq and time weightings |
Display type | 240 x 320 full color dot matrix LCD digital including real-time analog bar graph scale |
Data storage for time history logging – periods and profiles (depending on model) 1 Gb internal memory | 999 run maximum memory, long term recording is separated into “24 hr days” that can be recombined in Insight software for later analysis and review |
Timed interval for regular data storage -632 & 633 models | 1 sec to 1 hour in 13 fixed intervals for Periods 1 sec to 30 mins for Profiles |
Event capture above user selectable -632 & 633 models | User selectable trigger level 40 – 140 db in 1 dB steps |
Displayed time span for time history graph on LCD | Last 60 seconds |
Signal detected when calibrator placed over microphone at 1 kHz frequency | Calibration level set to 114.0 or 94.0 dB With +/-1 dB span and 0.1 dB resolution by user |
External power option (12 Vdc) or via USB 5V line | Yes via universal CEL-PC18 unit |
Analog outputs | AC (and optional DC) via 2.5 mm jack socket |
AC output characteristics - (Provided for DAT tape / PC wav file recording or headphone applications) | Approx 0.85V RMS FSD output on selected
sound level measurement range. Minimum load impedance 22k. |
DC output characteristics - (Provided at time of order as option for connection to chart recorder or pc data logging system) | 0 to 1.3V DC for FSD on selected range. Output corresponds to selected frequency and time weighting. 2k Output impedance |
Digital output of stored result sets | Via USB 2.0 mini B connector to Casella Insight program |