Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8”-18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the “wetted” brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab’s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 517ss

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a CGA 165 (5/8"-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6165

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6170

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6330

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6580

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6590

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6600

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6660

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8180

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8330

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8350

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8580

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8590

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8600

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8660

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8”-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6350

Part Number: 4903

Part Number: CDI-DFR

Part Number: 4903-600

Part Number: CDI-DFR-600