Bluelab Accessories / Spare Parts

METCARRYCASE Carry Case (Meter not included) by Bluelab

The Bluelab® Carry Case provides a custom fit so you can use and read your Bluelab® Meter right from the carry case.

A firm outer casing offers impact resistance for your Meter. There are two pockets in the top of the case specially made for the probes.

A removable and adjustable shoulder strap provides even more comfort and convenience. Simply zip up the Bluelab® Carry Case then tuck it away safely for storage or transport.

Note: Meter not included with case.

Features

• Firm outer casing for impact resistance
• Two custom pockets to insert Bluelab® Probes
• Internal strap to tuck probe cables away tidily
• Net pocket for Meter to sit in and strap to hold in place
• Strong nylon strap with adjustable length
• 'D' hook at top of outer case for hanging

Ideal for use with the following Bluelab Meters*

• Bluelab® Combo Meter
• Bluelab® pH Meter
• Bluelab® Soil pH Meter
• Bluelab® pH and Conductivity Pens

803250 EC Shroud (for all Bluelab Conductivity Probes) by Bluelab

The 'Shroud' (found at the probe) is very important for the accuracy and protection of the meter.

The shroud carries out three crucial functions:

• Protects the probe tip from damage
• Slows the movement of the solution to get a more accurate reading
• The slots allow an even flow of solution to pass through to avoid air bubbles on the probe surface

The shroud is removed prior to the cleaning process.

Truncheon - Battery Cap

TRUNSHROUDV2 EC Shroud V2 - Twist type (for V02 Truncheon Meters only) by Bluelab

The 'Shroud' (found at the probe) is very important for the accuracy and protection of the meter.

The shroud carries out three crucial functions:

• Protects the probe tip from damage
• Slows the movement of the solution to get a more accurate reading
• The slots allow an even flow of solution to pass through to avoid air bubbles on the probe surface

The shroud is removed prior to the cleaning process.

PWRSGUAR Guardian Monitor Power Supply by Bluelab

Use the international power supply pack with any Bluelab Guardian Monitor.

Power Out: 5V DC, 1Amp

Peridoser Pump Assembly (Including tubing 500mm)

PERITUBE Peridoser Replacement Tubing 500mm by Bluelab

The Peridoser Tubing is replacement tubing for the Bluelab Peridoser pumps. It is easy to replace. No other types of tubing should be used. The tubing requires replacement approximately every 18 months to 2 years to ensure reliable performance.

The Peridoser Tubing is sold as pre-cut 500mm lengths (1.64 feet), the required length for each individual peridoser pump. One length is required per peridoser pump. For example; a Triple Peridoser requires three lengths, a Twin Peridoser requires two lengths and a Single Peridoser requires one length.

PERILUBE Peridoser Tube Lube. 15cc Syringe by Bluelab

The tube lube is required for lubricating the tubing every six months and when replacing the tubing. It comes in a handy 15cc syringe for easy application.

It is a specialized silicone grease and is the only grease that can be used to lubricate the Peridoser Pumps.

DIBBER Replacement Dibber/Auger for Soil pH Probe by Bluelab

This handy dibber is used to pierce the soil prior to inserting the soil pH probe to eliminate the risk of sticks or stones breaking the glass tip of the soil probe.

There are units of measurement on the side, with centimeters and inches, so you can measure pH at consistent levels.

PHPROBECAP pH Probe - Screw Type Storage Cap by Bluelab

It is essential that the storage cap is placed back on the probe tip of the pH probe after use and when being stored. "If it dries it dies!"

Keep the pH probe tip wet by ensuring there is enough Bluelab pH Probe KCl Storage Solution to cover the probe

PROBHOLD pH Probe - Suction Cup / Holder by Bluelab

Protect your pH probe from damage by securing it with this nifty probe holder. Simply slide up the barrel of the probe stem and place onto the inside of a tank or reservoir.

As you know, pH probes are fragile as they have an internal glass stem and a glass bulb on the tip of the probe. A few dollars is all it takes to ensure a longer life from your pH probe.

Replacement Bluelab Peristaltic Pump Assembly

Replacement Acid/Alkali Resistant Dosing Tube (13ft /4M)

PWRSCONTPH pH Controller Power Supply by Bluelab

Use the international power supply pack with any Bluelab pH Controller or Pro Controller.

PROEXBOX External Lockout/Alarm Box by Bluelab

Use to connect the Bluelab® Pro Controller™ to external switches, for example - a float switch or a greenhouse alarm system.

When these switches are activated, Bluelab® Pro Controller™ is placed in lockout mode, so no further dosing will occur until reset.

POWERPODNA Powerpod by Bluelab

Electronic mains switching box designed to activate mains powered equipment. The Bluelab® PowerPod™ is an electronically controlled mains switching box that is designed to activate mains powered equipment via control signals from a Bluelab® controller.

The Bluelab® PowerPod™ is ideal for use when using a Bluelab® Pro Controller™ with third party mains powered pumps, heaters and coolers for temperature control.

Features

• 4 x IEC mains outputs (15A max inrush current)
• 100V~-240V~, 50/60Hz compatible
• Adds temperature control to Bluelab® Pro Controller and some Bluelab® Dosetronic™ models1
• Compatible with Bluelab® Pro Controller and Bluelab® Dosetronic™ models1

SPOTKIT Sample Pot by Bluelab

Perfect for reservoirs located more than 2 meters / 3.3 feet from your controller unit.

Place probes directly into the chamber for direct measurement of nutrient solution. Fittings include

Large 4m Acid Tube + Barbs

Small/Medium 4m Acid Tube + Barbs

Large 4m Nutrient Tube

Small/Medium 4m Nutrient Tubing

PUMPCASS-SM Cassette Only Small/Medium (10/100ml suitable) by Bluelab

The Bluelab Cassette is a replacement part specifically used with the Bluelab pH Controller, Bluelab pH Controller Connect, and Bluelab PeriPod M3 and M4.

Features

• Replacement peristaltic pump cassette
• Rollers and internal tubing included
• Simple to install
• Compatible with the Bluelab pH Controller and Bluelab PeriPod M3 or M4, suitable for 10/100ml pumps

Large Pump + Cassette 1200ml per min per pump

Medium Pump + Cassette 120ml per min per pump

Small Pump + Cassette 10ml per min per pump

EC Probe Pro Controller

Dosecable

Power Supply for Peripod M3/M4/L3 International Plugs

SAMTUB Sample Tube and Fitting by Bluelab

Product Features / Benefits

• Perfect for reservoirs located more than 2 metres / 6.6 feet from your controller unit. Place probes directly into the tube ports for direct measurement of nutrient solution
• Fittings included

Large Pump Cassette - only suitable for L3 Peripods - 1200mls

BMCINL01 IntelliLink by Bluelab

Easily connect IntelliDose into Edenic cloud software.

The IntelliLink provides internet connectivity to Bluelab Intelli devices, including IntelliDose. With IntelliLink, you can remotely access these systems via Edenic software.

• Connects Bluelab IntelliDose Controller to the internet
• Connect to your local router via Ethernet cable or Wi-Fi
• Get your intelli-data on your mobile device
• Remotely change recipes or parameters
• Multiple devices via a single login
• Requires Edenic software app

BMCSPT01 Sample Pot incl. Fittings and Calibration Solutions by Bluelab

Get accurate probe readings and protect your probes from damage with a sample pot. Our sample pots come with fittings for easy installation.

Suitable for use with Bluelab Intellidose Controller and Bluelab Guardian Monitor Wi-Fi (excluding Inline).

This sample pot is key to accurate probe readings and protecting your probes from damage. The sample pot is a very important part of any monitoring/dosing system. You simply mount this pot on the wall near the controller, and place the pH and/or EC probe into it. A pump in the reservoir will keep water flowing 24/7, so the probes are always getting the most accurate readings. Keeping the probes in the sample pot makes sure they cannot be broken or accidentally removed from the reservoir and they are easy to calibrate.

Power Supply - 24DC 2.5A - EU for Intelli Range

Power supply - 24DC 2.5A NZ/AU for Intelli Range

Power supply - 24DC 2.5A UK for Intelli Range

Power supply - 24DC 2.5A US for Intelli Range

Replacement Leap pH Probe Storage Cap

BPU12001 Peristaltic Pump 120ml for IntelliDose by Bluelab

The 120 ml peristaltic pump is a perfect solution for growers. Deliver nutrients, additives and pH solution easily.

• Easy to install and maintain, peristaltic pumps are the easiest way to deliver nutrients, additives and pH solution to your reservoir.
• These pumps mount on the wall, above the reservoir.
• Automate dosing and watering with accuracy and precision.
• The Bluelab single peristaltic pump helps you manage and maintain all the essentials your crops need to thrive.

• Rated at 120 ml/min
• Runs on 24V DC
• Pressure roller (2H+2R)
• PP made NPT fitting x2
• ABS enclosure x1
• DC power wire with 200+1800 mm(L)
• Autogrow Rating Label
• 0.25" in/out tubing

BPU45001 Peristaltic Pump 450ml for IntelliDose by Bluelab

The Bluelab Peristaltic Pump 450ml was designed with improved pump performance and ease of maintenance in mind

• Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 450ml per minute
• Requires no tools to replace the squeeze tube
• The spring-loaded roller block design enhances both performance and squeeze tube life

Why Peristaltic Pumps?

• Affordable commercial dosing volume
• Two dose rates (sizes) available - 450ml and 1400ml
• Designed to maximize squeeze tube life
• Provides constant adjustment while the inside of the tube wears
• Adjusting to tolerances and any other deviations that may exist in the tubing
• Integrated brackets keep hoses tidy

BPU1K401 Peristaltic Pump 1400ml for IntelliDose by Bluelab

The Bluelab Peristaltic Pump 1400ml was designed with improved pump performance and ease of maintenance in mind

• Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 1400ml per minute
• Requires no tools to replace the squeeze tube
• The spring-loaded roller block design enhances both performance and squeeze tube life

Why Peristaltic Pumps?

• Affordable commercial dosing volume
• Two dose rates (sizes) available - 450ml and 1400ml
• Designed to maximize squeeze tube life
• Provides constant adjustment while the inside of the tube wears
• Adjusting to tolerances and any other deviations that may exist in the tubing
• Integrated brackets keep hoses tidy